
2) Heat water to selected temperature
Put the kettle onto the power base, press "+/-" button to select your desired
water temperature ( 40℃,55℃,70℃,85℃), after select it, its corresponding
indicator turns on. And then press “100°C button”, the kettle starts to work and
heat the water to the selected temperature, at that time, all the indicators turn off
and two beeps can be heard.
3) Keep warm at the selected temperature
Put the kettle onto the power base, press "+/-" button to select your desired
keep-warm temperature ( 40℃,55℃,70℃,85℃), after select it, its corresponding
indicator turns on. And then hold and press “100°C button” for 3 seconds, and the
kettle will enter into keep-warm mode after heat the water to the selected
temperature, at that time, the indicator of the selected keep-warm temperature
keeps blinking in a cycle of one time/second. When the water temperature reaches
the selected temperature, one beep can be heard and the kettle will enter into the
keep-warm condition.After keeping warm for 12 hours, the kettle will shut off
automatically and all the indicators will turn off.
NOTE :Ensure that switch is free of obstructions and the lid is firmly
closed.The kettle will not turn off if the switch is constrained or if the lid is
opening.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling
water may result in scald, besides, don’t open the lid while the water in the
kettle is hot.
6. The kettle will not re-boil until the switch is pressed again. The kettle may be
stored on the power base when not in use.
NOTE: Ensure power supply is turned off when kettle is not in use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry
protection will automatically switch off the power. If this occurs, allow the kettle to
cool before filling with cold water to re-boil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture
to contact with these parts.
2. Wipe the appearance of body with a mild and damp cloth or cleaner, never use
the toxic cleaner.