TECshow Powerbox Manuale utente
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE /
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
Powerbox
POWERBOX
P. 2
1. Overview
PowerBox is a powerful 3-in-1 fixture equipped with a
section and 105 3-in-1 0.2W LEDs in its strobe & wash
function. Designed to provide both power and versatility,
-
ing coverage, 15 color macros and 8 built-in shows. Last
but not least, PowerBox sports 5 operating mode, among
which stands out a practical remote control that allows
-
motely. One team, multiple solutions.
Specifications
Source & Optic
• Laser: Red: 100mw/650nm, Green: 30mw/
532nm, Blue: 80mW/450nm
•
• Strobe: 105 0.2W RGB 3-in-1 LEDs
•
•
•
• RGBW color mix
• Huge coverage
• Razor sharp beams
• 8 built-in shows
• 15 color macros
• IR control included
Control
• Operational modes: Sound Active, DMX, Mas-
ter/Slave, Remote (via IR control) & Auto-run
• Built-in microphone
• 4 modes: Full, Laser, Led & Strobe
• Operating temperature: 10ºC~40ºC
Physical
• 4-digit LED display
• Power supply connectors: Interlock In/Out
• DMX connectors: 2 XLR connectors(XLR-3 In andOut)
• Dimensions: 223x486x208 mm. / 8.7x19x8.2 in.
• Weight: 5.2 Kg. / 11.5 Lbs.
ENGLISH VERSION
POWERBOX
P. 3
2. Introduction
Thank you using our LED laser series products. This fixture
is the latest new LED laser product.The product housing
used Aluminum plastic material, beautiful appearance,
with international advanced electronic control technol-
ogy and excellent industrial design. Product eect more
rich, colorful, and color is gorgeous because of installed
high output light source.
• This product applications widely, installation
simple. Can widely used for small parties, home
parties, small clubs, small stages and so on.
• What’s inside
• 1 light
• User Manual
• Power Cable
ENGLISH VERSION
1. Before delivery, this device has passed strict in-
spection, Please follow the user manual strictly
for operation, if this fixture is damaged by im-
proper operation and mistake, the fixture will be
out of warranty, and manufacture or dealer won’t
be responsible for it. In case of any technology
change in this manual,we won’t advise in further .
2. Aer you have received this product, please pay
special attention and check cautiously whether
the product was damaged or not during the
transportation, if it is, please do not use this fix-
ture and contact local dealers or manufacturers
as soon as possible.
3. The applicable temperature for the lighting is be-
low 40°C. Do not use the lighting above the temp
erature.
4. It must be kept clean; please do not use it around
overheat or dusty environment. Do not touch the
Chemical liquid.
5. Read the instructions before installing anything.
Pay attention to the manual and warning signs
on the equipment, if you have any other ques-
tions, please contact the dealer or manufacturer
as soon as possible.
6. Any break, please contact professionals: repairs
must be done by technical personnel.
7. Do not power in and open before installation. Let
have a rest when continuous work for eight hours.
It will longer the device using li.
8. Fixed installation, to prevent the strong vibration
or impact of the device.
9. The distance between the device and the projec-
tile must be at least 0.5 meter.
10. Never look directly into the light source, as sen-
sitive persons may suer an epileptic shock (espe-
cially meant for epileptics)! When light output
position of the device of dustproof glass break-
age, cracks or other visible damage, user should
replace the new glass to continue to use.
Installation Instructions
1. When install this equipment please make sure
there’s no flammable surfaces (decorated things,
etc) and minimum distance of 0.5M from the
equipment to the flammable.
2. The installation of the eect has to be built and
constructed in a way that it can hold 10 times the
weight and without any harming deformation.
3. The installation must always be secured with a
secondary safety attachment, e.g. an appropriate
safety rope. Never stand directly below the device
when mounting, removing or servicing.
Caution
POWERBOX
P. 4
ENGLISH VERSION
3. Led Display Operation
A. MENU
B. UP
C. DOWN
D. ENTER
E. LED DISPLAY
A B C D
E
MENU UP/DOWN Value Function
1 Addr 1-512 1 Address setting
2 ChMd 14Ch 14Ch 14 channel setting
2Ch 2 channel setting
3 ShNd Sh 1 Sh 7 Show 1 Led
Sh 2 Show 2, Strobe
Sh 3 Show 3, Laser
Sh 4 Show 4, Led+Laser
Sh 5 Show 5, Led+Strobe
Sh 6 Show 6, Laser+Strobe
Sh 7 Show 7 Led + Strobe + Laser
4 SPEE 0-100 90 Sh 1-Sh 7 speed setting
5 SLMD MASt MASt Master mode
SLAV Slave mode
6 SoUn ON/OFF ON Sound on/o
7 SoSE 0-100 90 Sound sensitivity setting
8 NodM Prom Prom No DMX
Master mode
BLAC Standby
HoLd Holding last show
9 LED ON/OFF ON LED Display on/o
10 Ver V10 Version
POWERBOX
P. 5
ENGLISH VERSION
• No matter what working condition, when re-
ceiving the controller signal, it will enter the
DMX control mode by auto.
• When several item in Master-slave mode, if
more then 1pc item as the master, program will
pick up one item as the master one randomly.
DMX-512 Value 0-255 Function
CH1 Control Mode 0-9 No function
10-44 Show 1Led
45-79
80-114 Show 3, Laser
115-149 Show 4, Led + Laser
150-184 Show 5, Led + Strobe
185-219 Show 6, Laser + Strobe
220-255 Show 7, Led + Strobe + Laser
CH2 RGBW color select
(CH1<=9)
0-9 black-out
10—198 Choose colors15 groups, each 13 data
for 1 color group
199-225 Color chase1single colorfrom slow to
fast
226-255 Color chase 2(multiple colorfrom slow to
fast
Sound active on/o CH1>9 0-247 Sound control oShow 1-Show 7 from
slow to fast
248-255 Sound control onShow 1-Show 7
CH3 Strobe LED 0-9 LED no strobe
10-244 LED strobe speed from slow to fast
245-255 LED strobe by sound
CH4 LED Motor setting 0-127 LED motor position select
128-255 LED motor scan speed from slow to fast
CH5 Strobe LED Setting 0-9 Strobe LED o
10-255 Strobe, LED chase eect select
CH6 Strobe chase speed 0-127 No strobe, LED chase speed from slow to
fast
127-255 With strobe, LED chase speed from slow to
fast
14-channel Mode
4. DMX Chart
POWERBOX
P. 6
ENGLISH VERSION
CH7 Laser color select 0-9 Laser o
10-127 Laser color fixed
128-255 Color chase speed from slow to fast
CH8 Laser pattern select 0-255 Laser pattern select
CH9 Laser pattern size 0-63 Choose patterns size
64-127 From small to large,speed up rate
128-191 From large to small,speed up rate
192-255 Large – small – large, speed up rate
CH10 Laser pattern rotation 0-127 Rotation angle select
128-191 positive rotation speed
192-255 Inverted rotation speed
CH11 Laser pattern pan position 0-127 Horizontal position
128-255 Horizontal move,speed up rate
CH12 Laser pattern tilt position 0-127 Choose vertical position
28-55 Vertical move,speed up rate
CH13 Laser scan track choose 0-255 Track choose
CH14 Laser track scan speed
choose
0-255 Laser track scan speed from slow to fast
DMX-512 Value 0-255 Function
CH1 Show mode 0-9 No function
10-44 Show 1, Led
45-79 Show 2, Strobe
80-114 Show 3, Laser
115-149 Show 4, Led + Laser
150-184 Show 5, Led + Strobe
185-219 Show 6, Laser + Strobe
220-255 Show 7, Led + Strobe + Laser
CH2 Show speed/Sound active 0-247 Show 1-Show 7 speed from slow to fast
248-255 Show 1-Show 7 Sound active
2-channel Mode
POWERBOX
P. 7
ENGLISH VERSION
5. Remote
Number Button Function
1 Stand By Stand by
2 DMX Hold on
3-10 Show 1-Show 8 Show1-Show7 (Show 8 hold on)
11 LED Color LED color select
12 LED Random LED color randomly
13 Sound ON Sound on
14 Laser Color Laser color select
15 Laser Random Laser color randomly
16 Sound OFF Sound o
17 Speed - Show 1 - Show 7 speed down
18 Speed Show 1 - Show 7 speed default
19 Speed+ Show 1 - Show 7 speed up
6. DMX-512 connection
3 Pin DMX output 3 Pin DMX input
1 Ground 2 Signal - 3 Signal +
POWERBOX
P. 8
ENGLISH VERSION
14-channel example
First one add 001 Second one add 015 Third one add 029
DMX IN DMX OUT
8. DMX address setting
Each fixture must set a specific starting address. When re-
ceiving signal, fixture will receive channel control signals
of this address from the DMX controller.
- For easy to use, the user can set the same address
for several fixtures , also can set up a unique ad
dress for every device.
- If you set the same address for all fixtures, all the
fixtures will receive from the same DMX channels
signal. All connecting fixtures are jointly con-
trolled, controller can’t separately control a devic
- If you set a dierent address for each fixture, each
fixture will receive unique signal and can be con-
trolled by DMX controller separately.
- This fixture has 14 channels.you should set the
starting address of the first unit to 1, the second
unit to 15(1*14 + 1), the third unit to 29(2*14+ 1),
and so on.
9. Installation
When install this equipment please make sure there’s no
flammable surfaces (decorated things, etc) within at least
2.5M and maintain minimum distance of 0.5M from the
equipment to the walls. Please make sure that there’s no
other equipment or decorating materials obstructed the
exhaust fan and the vent-pipe. Products should be install
immobility.
Clamp
Handle
POWERBOX
P. 9
ENGLISH VERSION
10. Product Size
11. Cleaning & Maintenance
Cleaning should be performed every 15-day period, by us-
ing a sponge which is dipped with alcohol, rather than wet
cloth or other chemical liquid, to clean the mirror.
Cut o power before cleaning and maintenance!
POWERBOX
P. 10
ENGLISH VERSION
This product is made of high-brightness transistor. We will
provide 1 year warranty under the condition that user
has operated the light normally and lifetime service. We
won't provide warranty if the damage is caused by artificial
or force majeure event. Cost of fittings should be charged
by user if product need maintenance aer 1 year .Please cut
this warranty card and shipped it along with the product to
our factory when applying for warranty.
Product Purchasing Date Code of invoice
Warranty Date From To
User’s Name Add
Company Tel
Indice
Lingue:
Altri manuali TECshow Attrezzatura di illuminazione
TECshow
TECshow NEBULA DUAL Manuale utente
TECshow
TECshow MINI DERBY Manuale utente
TECshow
TECshow NEBULA FLAT 81 Manuale utente
TECshow
TECshow HALO 1915 XL Manuale utente
TECshow
TECshow reefTEC Manuale utente
TECshow
TECshow NEBULA FLAT 162 Manuale utente
TECshow
TECshow QUADBAR 16 IP Manuale utente
TECshow
TECshow ALFIE STREAM Manuale utente
TECshow
TECshow SIRIUS IP Manuale utente
TECshow
TECshow RAINBOW LZ Manuale utente
