tedee GO TLV2.0 Istruzioni per il montaggio
INSTALLATION GUIDE AND USER
MANUAL
Read installation guide and
user manual. Learn how to use
your device in a safe and proper
manner.
www.tedee.com2
CONTENT
QUICK START WITH TEDEE GO
SAFETY INFORMATION
safety guidelines / warnings
charging and maintenance guidelines / warnings
SET OF ITEMS - WHAT’S IN THE BOX?
ACTIVATION CODE
SETUP - 5 EASY INSTALLATION STEPS
step 1: INSTALL ADAPTER (OPTIONAL)
step 2: INSTALL TEDEE GO
step 3: REMOVE BATTERY PROTECTIVE TABS
step 4: DOWNLOAD THE TEDEE APP, CREATE A NEW ACCOUNT AND LOG IN
step 5: USE THE TEDEE APP TO ACTIVATE AND CALIBRATE YOUR TEDEE GO LOCK
DEINSTALLATION OF TEDEE GO
BATTERY REPLACEMENT
FACTORY RESET
ADDITIONAL AND TECHNICAL INFORMATION
technical specications
radio frequency
software
LED signals
legal / environmental notes
warranty
technical support
3
4
4
5
7
8
9
9
11
13
14
15
16
18
19
20
20
21
21
22
24
24
25
www.tedee.com3
QUICK START WITH TEDEE GO
Tedee GO is a smart door lock that can be tted to any euro-prole
cylinder, with a double-clutch (panic function) feature.
Tedee GO allows you to unlock the door, share access, and check all
activities remotely.
This manual will give you an overview of the basic features of Tedee
lock and will help you walk through the setup in ve easy steps.
TEDEE GO SETUP - GO TO PAGE 9
ATTENTION: Tedee GO is only compatible with
euro prole cylinders equipped with a double clutch
function (panic function), allowing the door to be
unlocked from both sides with a key, with both keys
inserted in the cylinder, as shown in the gure on the
left.
If you are unable to determine whether your cylinder
has a double-clutch function, please contact Tedee
support.
INSTALL
ADAPTER
(OPTIONAL)
INSTALL TEDEE
GO
GET
TEDEE APP
REMOVE BATTERY
TABS
ACTIVATE
AND CALIBRATE
YOUR LOCK
1 2 43 5
www.tedee.com 4
SAFETY INFORMATION
SAFETY GUIDELINES / WARNINGS
WARNING: Read all safety guidelines and warnings provided below. Failure to follow them may result
in electric shock, re, and / or serious injury.
DO NOT
DO
MOVING PARTS
• Do not modify or disassemble the device, except as provided in the instructions (battery replacement/removal of protective
tabs).
• Do not self-service any part of the device.
• Do not use outdoors, intended for indoor use only.
• Do not immerse the device in any liquid or expose it to moisture.
• Do not use the device near an extreme heat source or open re.
• Do not use the device in an environment of a high humidity or dust levels, as well as pollution degree II.
• Do not insert any conductive objects in device openings and gaps.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction. Children should be supervised not to play
with the appliance.
• The device cannot be used as the only mean of access control to rooms or premises that require increased access control.
• If repairs are required, please contact Tedee technical support.
• Use only the batteries provided or recommended by Tedee.
• Read the installation guide and learn how to start working with your lock, how to add it to your Tedee app and how to pair it
with other Tedee devices. You can also follow the link: https://tedee.com/support-3/manuals/
• Because you can operate the device remotely, it is not recommended to keep your hands on the housing.
www.tedee.com5
BATTERY SAFETY GUIDELINES / WARNINGS
Battery-powered Tedee GO lock includes non-rechargeable and non-user-serviceable batteries.
DO NOT
• Do not mix old and new batteries.
• Do not touch leaking batteries.
• Do not short circuit batteries or insert them incorrectly.
• Do not use batteries that appear to be leaking, discolored, rusty, deformed; emit an odor; or are otherwise abnormal.
• Do not expose the batteries to re or high temperature. Do not leave or store batteries in hot places such as near an oven,
stove, direct sunlight, or other heat sources.
• Do not immerse batteries in water or allow them to come into contact with water.
• Do not disassemble, puncture, modify, drop, throw, or cause other unnecessary shocks to batteries.
• Do not place batteries in a microwave oven, or into any other high-pressure container.
• Do not carry loose batteries in a pocket or purse with other metal objects.
• Do not charge the non-rechargeable batteries included in your Tedee GO set. Do not overcharge rechargeable batteries (if
applicable).
• Do not put batteries in the mouth and do not swallow them. If swallowed, contact your local medical help immediately.
• Neither Tedee Sp. z o.o. nor our retailers assume any liability for failures to comply with these warnings and safety guidelines.
By purchasing this device, the buyer assumes all risks associated with LiPo batteries. If you do not agree with these conditions,
return the device immediately before use.
CR-123
CR-123
RECOMMENDED BATTERIES
To power your Tedee GO lock, you need to use 3x CR-123/123A batteries or 3x CR-123 rechargeable batteries.
We only allow to use 3V CR123/123A batteries or 3.7V CR123 rechargeable batteries.
WARNING: You can permanently damage the device while trying to use or install the batteries or
rechargeable batteries exceeding 3/3.7V respectively.
www.tedee.com 6
Other information
• The cleansing pad included with the device contains highly ammable isopropyl alcohol, which may cause serious eye irritation
and drowsiness or dizziness if inhaled. Keep it away from direct heat/re/ignition sources and avoid contact with eyes or
inhalation. Wash hands with soap after use. If eye irritation occurs, rinse carefully with water. If inhaled, go out into the fresh air
and make breathing comfortable. Seek medical advice if irritation/breathing problems persist.
• Dispose the devices in accordance with your local regulations. If possible, recycle.
• Do not dispose the device as a household waste and do not burn it.
• This device is safe to use under normal and reasonably foreseeable misuse operating code of conduct. If you notice any signs of
errors or hardware malfunction, contact Tedee technical support for help. In such case this device should be returned to Tedee
for necessary repairs under the warranty conditions. Any changes or modications to the device’s hardware or software which
are not approved, recommended, or provided by Tedee may void your warranty.
• Neither Tedee Sp. z o. o., nor our retailers are responsible for failure to comply with the above warnings and safety guidelines.
By purchasing this device, the buyer acknowledges all risks associated with the use of Tedee equipment. If you do not agree to
these terms, return the device to the manufacturer or distributor before use.
DO
• Do read the instructions for batteries replacement provided in this booklet.
• Do insert new batteries correctly, following the symbols for positioning the positive (+) and negative (-) terminals of each
battery. Do not reverse battery polarity.
• Do use only one type of batteries when replacing batteries in the device (do not mix).
• Do replace batteries with the size and type specied in this manual. Always replace all batteries in Tedee GO at the same time.
• Do store batteries in a cool, dry place at normal room temperature.
• Do remove batteries from devices that will be unused for extended periods of time.
• Do segregate, recycle, and dispose of the batteries according to your local regulations. For more information contact your local
authority.
www.tedee.com7
SET OF ITEMS – WHAT’S IN THE BOX?
2A
2B
2C 3
4
5
1
6
7
8 9
1. Key bow hole
2. Mounting screws (2A, 2B, 2C)
3. LED
4. The button
5. Latch button (press to slide off the cover)
6. 3x CR123 batteries
7. Adapter (for xing with an adhesive tape)
8. Allen key size 2
9. Cleansing wipe pad
www.tedee.com 8
ACTIVATION CODE
Location of the unique activation code (AC) of your Tedee lock.
Activation code (AC) of your Tedee lock is printed on:
While adding your device to Tedee app you can either:
• scan the QR Code
• type in AC manually (14 characters)
HELPFUL TIP
Before tting the Tedee lock to the cylinder, take a photo of your activation code and keep it.
SEPARATE STICKER INCLUDED IN THE KIT
Activation code
XXXXXXXXXXXXXX
FRONT SIDE OF YOUR DEVICE
AC
TI
VA
TION
CO
DE
XXXXXXXXXXXXXX
www.tedee.com9
STEP 1: INSTALL ADAPTER (OPTIONAL)
ADAPTER NOT NEEDEDADAPTER NEEDED
ATTENTION: If your lock cylinder extends less than 3mm beyond the rosette/escutcheon, as shown in the picture below, follow
the steps for tting the adapter shown on the next page of the manual.
If your cylinder extends 3mm or more beyond the outline of the door, go straight to STEP 2: INSTALL TEDEE GO.
< 3 mm
< 3 mm
Follow the instructions below Proceed to step 2
>= 3 mm
>= 3 mm
SETUP - 5 EASY STEPS
USE THE RULER PROVIDED WITH THE TEDEE GO SET
TO TAKE MEASUREMENTS.
3MM
www.tedee.com 10
Mount the adapter around the cylinder as shown below, making sure that the adhesive does not come into contact
with the cylinder, then press the adapter rmly against the door for 1 minute. You can now insert the key into the
cylinder.
1
2
3
Carefully remove the protective lm from the back
of the adapter, taking care not to touch the adhesive
tape, which may weaken its properties.
Thoroughly wipe the area around the lock cylinder
(rosette/escutcheon) with the cleansing wipe pad
provided and let it dry for about 1 minute.
1 min
Note: Make sure you install the adapter in a room with a temperature above 15 degrees Celcius.
Questo manuale è adatto per i seguenti modelli
2
Indice
