GNSS status
Red = no GNSS
GPS only
Green = DGPS,WAAS/RTK, GLONASS
Guidance mode
Straight AB guidance
Curved AB guidance
Circle pivot guidance
Last pass guidance
No icon = no guidance
Bounded area status
Outside boundary = currently traveling outside bounded area
Inside boundary = currently traveling inside bounded area
No icon = no boundary established
Application mapping status
Red = off
Green = on
Status/information screens
To display information:
1. Press status bar icon.
►GNSS status – displays information regarding number of
satellites in view, satellite quality and receiver ID
►Bounded area status – displays information regarding the
area in the current boundary
To remove the information box, tap the information box.
Guidance bar
The guidance bar keeps you informed of your choice of selectable
information (current speed, total applied area, application time, swath
number) and navigation activity (cross track error, current activity and
GNSS status).
Lightbar & Navigation Activity
Selectable Information Selectable Information
Lighbar & navigation activity
Lightbar spacing – used to represent the distance away from the
guideline or vehicle.
GNSS status – displays ashes “GPS” when GNSS is unavailable
Cross track error – displays the distance from your desired guideline
Current activity – displays activities such as mark an A or B point and
distance to return to a marked point
Selectable information
Speed – displays the current speed of travel
Total applied area – displays the total accumulated area that has
had application applied including double coverage areas
Application time – displays the total time application is active
during the current job
Swatch number – displays the current swath number in
reference to the initial guidance line. Number will be shown as a
positive number when the vehicle is to the right of the AB baseline or
a negative number when the vehicle is to the left of the AB baseline
1 2 3 4 5 6-6 -5 -4 -3 -2 -1
No information – shows no information in the display area
