TEINNOVA PROTUB Manuale utente
Electric brushing robot
user manual EN
protub
original manual translation
Electric brushing robot 2-33
protub
introduction
Training service
Technical service
Thank you very much for placing your trust in a quality product from TEINNOVA.
This product is manufactured using modern production processes and extensive
quality assurance measures.
We try to do everything possible to ensure that you are satisfied with this product and
can work with it without any problems.
If you have any questions about this product, please contact your dealer or our
company directly.
Before operating the machine, carefully read the operating instructions for your
equipment.
Please consider this manual as part of the machine and keep it handy for future
reference.
We offer the option of providing companies with specific training in the use of
our equipment and training their operators to provide the best service and thus
contribute to the success of their end customers.
Aspects such as knowing how to draw up a good estimate objectively, responding to
specific problems that may arise, or offering a more professional and efficient service.
Thanks to our own manufacturing of cleaning equipment we can control at all times
the quality and performance of each machine we manufacture, and this has allowed
us to have very low repair ratios which have always been solved with our own
Technical Service led by the same team that manufactures it, and in very short
periods of time.
We have all types of spare parts for your equipment, as well as related accessories.
These operating instructions are protected by copyright. We reserve all rights, in particular the right of
production, translation and processing with electronic systems.
Dear customer:
©
Electric brushing robot 3-33
protub
symbology
safety warnings
conditions of use
know your machine
control panel
accessories and related equipment
operating instructions
5-33
6-33
7-33
8-33
9-33
11-33
18-33
remote control
10-33
index
Electric brushing robot 4-33
protub
transport
maintenance and care
waste management
technical specifications
CE declaration of conformity
27-33
28-33
30-33
31-33
33-33
warranty conditions
32-33
index
Electric brushing robot 5-33
protub
symbology
DANGER!
WARNING!
CAUTION!
IMPORTANT NOTE!
All the existing graphic symbols in this manual as well as those indicated on the equipment itself are explained
in this section, it is important to read with special attention the text related to this symbology since it is related to
personal and equipment safety.
This symbol alerts you to a potentially hazardous situation which can result in
death or serious injury if the instructions are not followed properly. Be sure to
read all instructions described in the “Safety Information” section.
This symbol alerts you to a potentially hazardous situation which may result in
minor or moderate injury, or property damage resulting in personal injury if you
do not properly follow the instructions.
This symbol alerts you to a situation that may result in property damage
without personal injury if you do not properly follow the instructions.
This symbol alerts you to information regarding the optimal use of the
equipment to avoid possible misuse.
Electric brushing robot 6-33
protub
The PROTUB device must NOT be used for purposes other than those described in these operating
instructions.
Before starting up the equipment, make sure that all electrical and fluid connections are correct.
Before starting the equipment, make sure that the brush is inside the duct to be cleaned
Be careful to place your PROTUB on a smooth and stable surface.
Persons operating PROTUB equipment must be sufficiently trained.
Hold the hose firmly before operating the brush motor. Keep a firm grip on the hose at all times while
operating the brush.
Safety goggles must be worn to prevent any splashes of liquid or dust from reaching the operator’s eyes.
Secure PROTUB equipment properly in an upright position during transport in a vehicle.
Do not open or tamper with any of the internal elements of the equipment. In the event of a fault, contact
TEINNOVA’s Technical Assistance Service on +34 941 44 50 56.
safety warnings
Electric brushing robot 7-33
protub
Donotplacethedeviceinahorizontal
position under any circumstances,
as this could lead to malfunctions.
LEGEND
PROTUB is an electric brushing machine for cleaning and chimney sweeping inside chimneys for professional
use with a maximum diameter of 400 mm; cleaning the inside of tubes in heat exchangers, both Pyrotubular
and Aquatubular, with a minimum diameter of 12 mm; and ventilation or air conditioning ducts, with a maxi-
mum diameter of 400 mm. Appropriate accessories shall be provided for each duct.
A 6 mm diameter flexible rotor shaft can be fitted, so that 10 metres of pipe can be cleaned from a single point
on the pipe, or a 10 mm diameter flexible rotor shaft can be fitted, so that 15 metres of pipe can be cleaned
from a single point on the pipe. It can be used in flues and extraction hoods.
power supply
mains water
conditions of use
protub
Electric brushing robot
for duct cleaning.
Any other use is strictly prohibited
without the written permission of
the manufacturer.
Electric brushing robot 8-33
protub
Components:
1- On/Off button
2- LED indicator
3- Emergency button
4- Control panel
5- Mains water supply connection
6- Flexible rotor shaft connector
7- Electrical connection
8- Resettable fuse
9- Electrical connection cable holder
10- Carrying handle
know your machine
6
5
9
7
3
4
10
1
2
8
Electric brushing robot 9-33
protub
Main control panel:
control panel
6
1
2
3
4
5
7
Potentiometer
General Switch
Left Turn
Stop
Right Turn
Remote control
Emergency Mushroom
Increases or decreases the speed of the brushing function.
Switching the equipment on and off
Operate the motor of the PROTUB planing machine so that its
rotational movement is counterclockwise.
General shutdown of any system in operation.
Operate the motor of the PROTUB planing machine so that its
rotational movement is clockwise.
Activates the remote control, leaving the equipment control
panel deactivated.
Emergency stop
8LED Strip Indicates machine status
Electric brushing robot 10-33
protub
remote control
Remote control panel:
1
2
3
5
4
Unlock button
Right Turn
STOP
Automatic mode
Left Turn
Button for activating the above functions. In order to start a
function, both buttons must always be pressed at the same
time.
Operate the motor of the planing machine so that its rotational
movement is counterclockwise.
General shutdown of any system in operation.
Activate the timer on the brushing machine, so that the brushes
rotate for 10 seconds on each side. It will automatically start to turn
to the right.
Actuates the motor of the planing machine so that its rotational
movement is clockwise.
1 Battery12V.
Alkaline 23A
5
1
3
2
A
4
Indice
Altri manuali TEINNOVA Robotica
