Teknetics Tek-Point Manuale utente

OWNER’S MANUAL

METAL DETECTIN PINPOINTER

Do not use “ZINC-CARBON” or “HEAVY DUTY” batteries

햳____________________________________

INDEX

Tek-Point features ................................................4

Quick Start uide..............................................5-6

Batteries

Low-Battery Warning........................................7

Waterproof Design ...........................................8

Operation

On and Off.........................................................9

LED Flashlight...................................................9

Program the Alarm-type & Sensitivity-level

10-11

Re-Tune .........................................................12

round-Mineral Calibration.......................12-13

Frequency Shifting....................................14-15

Overload ........................................................16

Re-Boot..........................................................16

Lost Mode ......................................................16

Tips on How to Use Pinpointer ..........................17

Specifications .....................................................17

Trouble Shooting ................................................18

Warranty................................................Back page

___________________________________ 햴

Congratulations on the purchase of

your new Tek- oint inpointer.

The Tek-Point was designed to be the best-

performing pinpointing probe on the market,

answering the call from treasure hunters who

demand a robust, modern design and a probe that

maintains high sensitivity in the most demanding

environments.

The Tek-Point is a waterproof, pulse induction

detector. An advanced pulse induction design allows

the Tek-Point to operate in environments where other

pinpointers fall short. Whether in heavily mineralized

soils or saltwater, this pinpointer goes deeper and

guarantees stable operation where competitive

products false or lose sensitivity.

Throw away your 9-volt batteries folks. Welcome

to the 21st century!

Tek-Point is ergonomic and features easy-to-use

one-button operation. It was designed by treasure

hunters to take your treasure hunting performance to

the next level.

햵____________________________________

Your Tek-Point pinpointer

offers many great features:

Function:

• Single-Button Operation

• Adjustable Sensitivity

• Rapid Retune

• Lost Alarm Feature

erformance:

• 360-degree Detection

• Waterproof to 6 feet

• High Sensitivity

• Automatic round

Calibration

Extras:

• Ruler (i ches a d CM)

• LED Flashlight, Adjustable

& Super-bright

• Auto Shutdown

• Molded Lanyard Loop

CONSTRUCTED FROM

SPECIAL ABRASION-

RESISTANT MATERIALS

(won’t wear through

like other pinpointers)

Comfortable

No-Slip

Handgrip

Power and

Programming

Adjustable

LED Light

Ruler in

Inches and

Centimeters

360°

Detection

Lanyard Loop

(do not use metal ring)

___________________________________ 햶

QUICK START:

ower on/off:

ower On: Quick-Press (press-and-release button, quickly)

• Hear beep and vibrate, indicating ready to detect.

• Wait for ready indication before presenting pinpointer to metal. If

metal is near pinpointer before ready indication, pinpointer will

overload (not detect) or operate at reduced sensitivity (see

Overload p.16). Press button to exit overload.

ower Off: Press-and-Hold the button.

• Release the button when you hear the BEEP. Pinpointer is off.

rogramming Alarm and Sensitivity:

1. Start with power on.

2. Press-and-hold button. Do not release the button at the first

alarm (Power-down-alarm).

3. Following the power-down-alarm, hear the programming alarm:

JIN LE-JIN LE-JIN LE.

4. Release button when you hear JIN LE-JIN LE-JIN LE; device

is now in programming mode.

5. Each press of the button will advance to a different setting.

6. Each setting is indicated with beep(s), vibration(s) or both.

7. To choose a program, stop pressing the button at the desired

setting. Ready to hunt.

Ground-Mineral Calibration:

1. With Power on, touch the tip of probe to the soil.

2. Quickly press-and-release the button.

3. Hear beep, confirming calibration is complete.

햷____________________________________

LED Flashlight:

1.Start with power off.

2.Press-and-hold button. Continue to hold. Light will turn on and flash.

3.Continue to press-and-hold button.

• As long as you continue to hold the button, the Pinpointer

will cycle through various brightness settings.

• At the brightest setting, the light will flash.

4.Release the button at your desired level of illumination.

• Alarm will confirm program is set (beep, vibrate or both).

5.Device is powered on; ready to hunt.

Frequency Shift:

(To eliminate interference with detector)

1. Turn Pinpointer power off.

2. Turn your detector on.

3. Turn Pinpointer on.

Press-and-hold button. Do not release the button at the first alarm

(Power-down-alarm) or programming alarm (JIN LE-JIN LE-JIN LE).

5. Release the button when you hear the double tone-roll.

6. Device is now in frequency-shift mode.

Each press-and-release will change the frequency of the pin-

pointer; a short beep confirms this action.

There are 16 different frequencies to choose from. A double-beep

means you’ve cycled through all 16 frequencies; continue to

press-and-release to continue cycling through frequencies.

7. When you reach the desired frequency your pinpointer will not

interfere with your detector.

At this point do not press the button again; the pinpointer will alarm, in-

dicating programming is complete and that the device is ready to hunt.

Re-Boot:

If pinpointer becomes unresponsive or locks-up,

perform re-boot sequence:

1. Remove the battery door (to break battery contact).

2. Replace battery door. Power on to resume operation.

CONTINUED

QUICK START

___________________________________ 햸

BATTERIES:

The Tek-Point operates on 2 AA alkaline, lithium or nickel-

metal hydride batteries (not included).You can also use high

quality rechargeable batteries. Expect approximately 25

hours of operation from alkaline batteries.

Do not use “Zinc-carbon” or “Heavy-duty” batteries.

To replace batteries:

1. Use a coin or flathead screwdriver.

2. Rotate counterclockwise to remove cap.

3. Install 2 AA batteries, positive-side down.

4. Rotate clockwise until snug to close and seal.

The battery compartment was designed to provide a snug fit

for the batteries. If you experience difficulties in removing

your batteries, tap the pinpointer against the palm of your

opposite hand to help dislodge the batteries.

Low-Battery Warning:

If your batteries are running low and need to be replaced,

you will hear a boop-boop-boop sound at power-down.

Critical Low-Battery:

If the batteries are totally spent, you’ll hear a boooooop

sound and the pinpointer will then turn itself off.

햹____________________________________

WARNING:

Submersing this

product to a depth

greater than 6 feet

and/or longer than

1 hour will void

warranty.

Waterproof Design:

The Tek-Point is waterproof to a depth of 6 feet for 1 hour.

The rubber O-ring around the battery cap is vital to maintaining a

waterproof seal. You must periodically apply a silicon spray

lubricant to the o-ring to maintain a watertight seal.

IM ORTANT:

Check the O-ri g.

Make sure there is no debris on the O-ring or in the battery

cap threads.

2-AA

Batteries

(not included)

ATTENTION:

Periodically apply Silicon Spray

Lubricant to Battery Cap O-ring

Waterproof

Speaker

Sealed

Battery Cap

O-Ring

BATTERIES (CONTINUED)

___________________________________ 햺

On and Off

(tones described are at factory-default settings)

ower On: Quick- ress (press and release the

button, quickly)

• Tek-Point will beep and vibrate

• Tek-Point is ready to detect.

ower Off: ress-and-Hold the button.

• As soon as you hear the BEEP, release the button.

• The Tek-Point is off.

If you program the target-alarm to your own custom setting, your

programmed target-alarm will also be the indication you hear, or feel,

at power-on and power-off. For example: if you program the target

alarm to vibrate, the pinpointer will vibrate at power-on and power-off.

CAUTION:

Do not power-on close to any metal. See page 16,

Overload section.

LED Flashlight

To adjust light illumination level:

Start with power off.

ress-and-Hold the button.

Continue to hold. Light will turn on and flash.

Continue to press-and-hold the button and observe the

different levels of brightness.

• As long as you continue to hold the button, the Tek-Point will

cycle from Off, to Bright, then Brighter and Brightest.

• At the brightest setting, the light will flash.

• The cycle will continue and repeat until you release the button.

Release the button at your desired level of illumination.

• Alarm will confirm program is set (beep, vibrate or both).

Device is powered on and ready to hunt.

Your programmed level of illumination will be saved to memory,

even after power-off and after changing batteries.

OPERATION

햻____________________________________

rogramming: Alarm and Sensitivity

The Tek-Point target alert can be audible, vibratory or both.

There are three different sensitivity levels: low, medium a d high.

Default settings:

The default settings for this pinpointer are:

• LED: 70% brightness

• Alarm: Beep and vibrate

• Sensitivity: Medium

To program the alarm-type and sensitivity-level:

1. Start with power on.

2. ress-and-Hold the button.

Do not release the button at the first alarm (beep or vibrate).

If you release the button at the first alarm, the device

will turn off.

3. Following the power-down-alarm, hear the

programming-alarm: JIN LE-JIN LE-JIN LE.

4. Release the button when you hear JINGLE-JINGLE-

JINGLE. The device is now in programming mode.

5. ress-and-release the button to change settings.

Each press of the button will advance to a different setting.

Each setting is indicated with beep(s), vibration(s) or both.

6. To choose a program, stop pressing the button at the

desired setting. Setting is stored after 3 seconds

without button press.

The device will confirm your setting with beep, vibrate or both.

8. Device is now ready to hunt.

OPERATION

Indice

Altri manuali Teknetics Rilevatore di metalli

Teknetics

Teknetics T2 Manuale utente

Teknetics

Teknetics T 2+ Manuale utente

Teknetics

Teknetics Gamma Sports 6000 Manuale utente

Teknetics

Teknetics eurotek Manuale utente

Teknetics

Teknetics Gamma Sports 6000 Manuale utente

Teknetics

Teknetics eurotek Manuale utente

Teknetics

Teknetics Alpha 2000 Manuale utente

Teknetics

Teknetics G2 Manuale utente

Teknetics

Teknetics G2+ Manuale utente

Teknetics

Teknetics Omega 8500 Manuale utente

Teknetics

Teknetics Alpha 2000 Manuale utente

Teknetics

Teknetics Delta 4000 Manuale utente

Teknetics

Teknetics G2 Manuale utente

Teknetics

Teknetics Delta 4000 Manuale utente

Teknetics

Teknetics G2 Manuale utente

Teknetics

Teknetics Eurotek Pro ETEKPRO11DD-SKD Manuale utente

Teknetics

Teknetics Gamma Sports 6000 Manuale utente

Teknetics

Teknetics T2 Manuale utente

Teknetics

Teknetics Eurotek Pro 11DD Manuale utente

Teknetics

Teknetics DigiTek Manuale utente

Teknetics

Teknetics TreasureTek Elite Manuale utente

Teknetics

Teknetics eurotek Pro Manuale utente

Teknetics

Teknetics Delta 4000 Manuale utente

Manuali Rilevatore di metalli popolari di altre marche

Garrett

Garrett MAGNASCANNER CS 5000 Manuale utente

Valex

Valex 1800200 Manuale utente

Gauss

Gauss MIL MD Manuale utente

Velleman

Velleman CS130 Manuale utente

Sears

Sears 321.596370 Manuale utente

Eriez

Eriez X8 Manuale utente

Steinberg Systems

Steinberg Systems SBS-MD-22 Manuale utente

Zircon

Zircon MetalliScanner m60c Manuale utente

nalanda

nalanda MD027 Manuale utente

REV Ritter

REV Ritter CB-7005 Manuale utente

Minelab

Minelab F1A4 Manuale utente

Fisher Research Labs

Fisher Research Labs F70 Manuale utente

Steinberg Systems

Steinberg Systems SBS-MD-12 Manuale utente

GOLDEN MASK

GOLDEN MASK 5 Manuale utente

Grizzly

Grizzly YM 203 Manuale utente

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Manuale utente

Treasure Cove

Treasure Cove Vibra-Probe 560 Manuale utente

Accurate Locators

Accurate Locators XL16 IMAGER Manuale utente