Tektronix WFM720UP Manuale utente

WFM720UP, WFM820UP, and WFM830UP Upgrades

for the WFM7200, WFM8200, and WFM8300

Waveform Monitors

ZZZ

Instructions

Warning

The servicing instructions are for use by qualiﬁed personnel

only. To avoid personal injury, do not perform any servicing

unless you are qualiﬁed to do so. Refer to all safety summaries

prior to performing service.

www.tektronix.com

*P075100103*

075-1001-03

or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication

supersedes that in all previously published material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Table of Contents

General Safety Summary .......................................................................................... 1

Kit Description...................................................................................................... 3

Products......................................................................................................... 5

Required Tools ................................................................................................. 5

Kit Parts Lists .................................................................................................. 6

Upgrade Installation................................................................................................ 9

Verify the Currently Installed Options....................................................................... 9

How to Prevent Electrostatic Discharge.................................................................... 10

Install the Software Upgrade ................................................................................ 11

Install the Option Hardware ................................................................................. 15

Install the Option Software Key............................................................................. 28

Verify the Upgrade ................................................................................................ 29

Quick Veriﬁcation ............................................................................................ 29

Detailed Veriﬁcation.......................................................................................... 29

WFM720UP, WFM820UP, and WFM830UP Upgrades i

Table of Contents

ii WFM720UP, WFM820UP, and WFM830UP Upgrades

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

While using this product, you may need to access other parts of a larger system.

Read the safety sections of the other component manuals for warnings and

cautions related to operating the system.

To Avoid Fire or Personal

Injury

Use ProperPowerCord. Use only the power cord speciﬁed for this product and

certiﬁed for the country of use.

Connect and Disconnect Properly. Do not connect or disconnect probes or test

leads while they are connected to a voltage source.

Ground the Product. This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be

connected to earth ground. Before making connections to the input or output

terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings. To avoid ﬁre or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Do not apply a potential to any terminal, including the common terminal, that

exceeds the maximum rating of that terminal.

Power Disconnect. The power cord disconnects the product from the power

source. Do not block the power cord; it must remain accessible to the user at

all times.

Do Not Operate Without Covers. Do not operate this product with covers or

panels removed.

Do Not Operate With Suspected Failures. If you suspect that there is damage to

this product, have it inspected by qualiﬁed service personnel.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

WFM720UP, WFM820UP, and WFM830UP Upgrades 1

General Safety Summary

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation. Refer to the manual's installation instructions for

details on installing the product so it has proper ventilation.

TermsinthisManual These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION.Caution statements identify conditions or practices that could result in

damage to this product or other property.

Symbols and Terms on the

Product

These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read

the marking.

WARNING indicates an injury hazard not immediately accessible as you

read the marking.

CAUTION indicates a hazard to property including the product.

The following symbol(s) may appear on the product:

2 WFM720UP, WFM820UP, and WFM830UP Upgrades

Kit Description

This document provides instructions for installing the video and audio upgrades

listed below into an existing Tektronix WFM7200, WFM8200, or WFM8300

waveform monitor.

Table 1: Supported upgrades

Video

Upgrades WFM820UP WFM830UP WFM720UP Description

Option 2SDI Adds a second SDI input module, adding 2 additional SDI

inputs that support 3G-SDI, HD-SDI, and SD-SDI. (Option

3G is required for 3G-SDI support).

Option 3G Adds support for 3G-SDI signal formats.

Option CPS Adds support for Composite Analog Video Monitoring;

2 composite Analog inputs; passive loop-through. This

option not compatible with Option 2SDI.

Option 3DAdds Stereoscopic 3-D Video Monitoring Capabilities

(including Simultaneous Input Monitoring (SIM) of dual

SDI inputs and synchronized left eye and right eye signals

monitoring (SyncVu™)).

Option S3D Adds Stereoscopic 3-D Video Monitoring Capabilities

(including Simultaneous Input Monitoring (SIM) of dual

SDI inputs and synchronized left eye and right eye signals

monitoring (SyncVu™)).

OptionGEN Adds color bar and pathological signal generator for

SD/HD SDI. Option 3G required for 3G-SDI support.

WFM720UP, WFM820UP, and WFM830UP Upgrades 3

Kit Description

Table 1: Supported upgrades, (cont.)

Video

Upgrades WFM820UP WFM830UP WFM720UP Description

Option AVD Add support for out-of-service audio/video delay

measurement; requires Option AD or DPE.

Option SIM Adds simultaneous monitoring of 2 HD/SD-SDI inputs

or one HD/SD-SDI input and one CPS input; Option 3G

required for 3G-SDI formats support.

Audio

Upgrades WFM820UP WFM830UP WFM720UP Description

Option AD Adds Analog Audio Monitoring (2 sets of 6 channel

Analog Audio inputs and 8 channels of Analog Audio

outputs); 16 channels Embedded and AES/EBU Digital

Audio support (8 channels at a time).

Option DPE Adds Option AD capabilities (Analog and Digital Audio,

Embedded or External AES), plus support for decoding

and monitoring Dolby E, Dolby D, and Dolby Digital Plus

Audio. (Audio cable available separately).

Option DDP Adds support for decoding and monitoring Dolby Digital

Plus Audio.

This upgrade is only available for instruments that

currently support decoding and monitoring Dolby E and

Dolby D.

Analysis

Upgrades WFM820UP WFM830UP WFM720UP Description

Option EYE Adds Eye Pattern Display and Jitter Measurement

Package (includes 3G-SDI, HD-SDI, and SD-SDI

Eye pattern and Jitter waveform displays; automated

measurements of Eye pattern paramenters,Jitter, and

cable parameters; color bar and pathological signal

generation); Option 3G required for 3G-SDI support.

Option PHY Adds Physical Layer Measurement Package (includes

3G-SDI, HD-SDI, and SD-SDI Eye pattern and jitter

waveform displays; automated measurements of Eye

pattern parameters, jitter, and cable parameters; color bar

and pathological signal generation); Option 3G required

for 3G-SDI support.

Option PHY3 Adds Physical Layer Measurement Package (includes

3G-SDI, HD-SDI, and SD-SDI Eye pattern and jitter

waveform displays; automated measurements of Eye

pattern parameters, jitter, and cable parameters; Option

3G required for 3G-SDI support.

Option PROD Adds Advanced Gamut Monitoring Package (Spearhead

Display and Luma Qualiﬁed Vector Display).

Option DAT Adds data analysis capabilities. Allows for logic-level view

of video and embedded audio data stream and ANC data

extraction.

4 WFM720UP, WFM820UP, and WFM830UP Upgrades

Kit Description

Products

The following Tektronix products are supported by this kit:

WFM7200 All instruments

WFM8200 All instruments

WFM8300 All instruments

Required Tools

The following table lists the tools required to install the upgrade.

Table 2: Required tools

Name Description

TORX screwdriver handle (Hardware options

only)

Accepts TORX-driver bits

T-10 and T-15 TORX tips (Hardware options

only)

TORX-driver bit for T-10 and T-15 screw

heads

1/4 inch nut driver (Hardware options only) Standard tool

9/16 inch socket (Hardware options only) Deep socket to ﬁt over BNC connector

Standard PC Running Windows 98, Windows NT 4.0,

Windows ME, Windows 2000, or Windows

Anti-static wrist strap (Hardware options

only)

For WFM8000 Series upgrades, WFM8200

and WFM8300 Speciﬁcations and

Performance Veriﬁcation manual and all

test equipment listed within to perform the

veriﬁcation checks

Tektronix part number 077-0259-XX

Available for download from the Tektronix

Web site at www.tektronix.com/manuals

For WFM7200 upgrades, WFM7200

Speciﬁcations and Performance Veriﬁcation

manual and all test equipment listed within to

perform the veriﬁcation checks

Tektronix part number 077-0669-XX

Available for download from the Tektronix

Web site at www.tektronix.com/manuals

WFM720UP, WFM820UP, and WFM830UP Upgrades 5

Kit Description

Kit Parts Lists

The following tables list the parts supplied with each upgrade kit. Before you

start the upgrade, verify that you received all of the parts for the upgrade kit you

ordered.

WFM820UP 2SDI

WFM830UP 2SDI

WFM720UP 2SDI

Table 3: Option 2SDI parts list

Quantity Part number Description

1EA —— ENVELOPE, IMPORTANT DOCUMENTS; CONTAINS

SOFTWARE OPTION KEY

1 EA 075-1001-XX INSTRUCTIONS; WFM720UP, WFM820UP, AND

WFM830UP UPGRADES

1 EA 870-0196-XX CIRCUIT BRD ASSY; SDI, TESTED,

WFM8200/WFM8300, ROHS COMPLIANT

1 EA 333-4593-XX REAR PANEL, SAFETY CONTROLLED, STD (SDI)

4 EA 220-0497-XX NUT, PLAIN, HEX; .5-28 X .562 HEX, BRS, NI

(NICKEL) PLATED

4 EA 210-1039-XX WASHER, LOCK; 0.521 ID, INT, 0.025 THK, STEEL,

ZINC FINISH

NOTE. Once the hardware is installed, you must download the software to

activate Option 2SDI. Go to www.tektronix.com/downloads. (See page 11, Install

the Software Upgrade.)

WFM820UP CPS

WFM830UP CPS

WFM720UP CPS

Table 4: Option CPS parts list

Quantity Part number Description

1EA —— ENVELOPE, IMPORTANT DOCUMENTS; CONTAINS

SOFTWARE OPTION KEY

1 EA 075-1001-XX INSTRUCTIONS; WFM720UP, WFM820UP, AND

WFM830UP UPGRADES

1EA 872-0258-XX CIRCUIT BD SUBASSY; ANALOG COMPOSITE

WFM820UP EYE Table 5: Option EYE parts list

Quantity Part number Description

1EA —— ENVELOPE, IMPORTANT DOCUMENTS; CONTAINS

SOFTWARE OPTION KEY

1 EA 075-1001-XX INSTRUCTIONS; WFM720UP, WFM820UP, AND

WFM830UP UPGRADES

1 EA 872-0189-XX CIRCUIT BOARD SUBASSY; 3G-EYE

6 WFM720UP, WFM820UP, and WFM830UP Upgrades

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Tektronix Monitor

Tektronix

Tektronix WFM520UP Manuale utente

Tektronix

Tektronix PRISM MPI2-RACK-MD Manuale

Tektronix

Tektronix WFM6120 Istruzioni di installazione e manutenzione

Tektronix

Tektronix DF 1 Istruzioni per il montaggio

Tektronix

Tektronix MTM400A Manuale per l'uso e la cura

Tektronix

Tektronix MTM400A Istruzioni di installazione e manutenzione

Tektronix

Tektronix 013-0278-XX Manuale utente

Tektronix

Tektronix QAM400A Manuale per l'uso e la cura

Tektronix

Tektronix WFM8300 Guida utente

Tektronix

Tektronix WFM2200 Manuale per l'uso e la cura

Tektronix

Tektronix 4105 Manuale utente

Tektronix

Tektronix MTM400 Manuale per l'uso e la cura

Tektronix

Tektronix WFM6100 Opt. MB Manuale per l'uso e la cura

Tektronix

Tektronix WFM7200 Come usare

Tektronix

Tektronix RFM300 Istruzioni di installazione e manutenzione

Tektronix

Tektronix WFM700 Series Manuale utente

Tektronix

Tektronix PRISM MPX2-DUALDSP Manuale

Tektronix

Tektronix WFM2200 Come usare

Tektronix

Tektronix MTM400 Manuale utente

Tektronix

Tektronix 1760 series Manuale utente

Tektronix

Tektronix WFM4000 Series Manuale utente

Tektronix

Tektronix 1705A Manuale utente

Tektronix

Tektronix 4112 Manuale utente

Tektronix

Tektronix 4112 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione