Telecom FM GSMRoute Bri Istruzioni operative

TelecomFM GSMRoute Bri

Unmanaged Programming Guide

Version 5 – September 2007

GSMRoute Bri Unmanaged Programmer Guide

Document Control

Date Document

Version Change

April 2003 1 Release of document

July 2005 1 1. GSM call home added. 2. Dual MSN.

3. Independent routing on network 7

(for version 1.10 onwards)

Jan 2006 2 Notices added

April 2007 3 Remote Trace & Configuration over

GSM, Advanced Routing options, (for

versions 1.17 onwards)

August 2007 4 Remote firmware download over GSM

(version 2.0 onwards)

September 2007 5 Modified for new version of Unmanaged

Programmer

Notices:

TelecomFM shall accept no liability for any error or damages of any kind resulting from the use of

this document or the equipment it relates to.

The wording in this document may change from time to time. Please refer to the TelecomFM web

site www.telecomfm.co.uk for the latest release.

GSMRoute Bri Unmanaged Programmer Guide

1Contents

1Contents.................................................................................................................. 3

2Hardware & Software Requirements ........................................................................ 4

3Installation of Programmer...................................................................................... 4

4Starting the Programmer ......................................................................................... 6

5Getting Template ..................................................................................................... 8

6Edit Template .......................................................................................................... 9

6.1 Statistics Tab......................................................................................................10

6.2 Config Tab .........................................................................................................12

6.3 Management Tab ................................................................................................14

6.4 GSM-ISDN Routing Tab........................................................................................15

6.5 Template Properties.............................................................................................17

7Set Template ......................................................................................................... 18

8Testing the unit ..................................................................................................... 18

9Remote Trace and Configuration Over GSM ............................................................ 19

10 Remote Firmware download Over GSM ............................................................... 22

GSMRoute Bri Unmanaged Programmer Guide

2Hardware & Software Requirements

Windows NT, 2000, XP (Latest Service Packs where applicable).

PC Hardware as required for operating system.

9 pin RS232 COM Port

300MB Hard Drive Space

3Installation of Programmer

From CD

1. From CD

Insert the CD – the CD will autorun and the menu is displayed (if the menu is not displayed

then double-click on “My Computer”, double-click on your CD Drive letter and then double-

click the “autorun.exe” file). Click on “Install Unmanaged Programmer” to start the

installation.

Or From Download

Browse to the folder that you downloaded the Unmanaged Programmer to and double-click

the “ump.exe” file to start the installation.

2. Click the “Setup” button:

3. Click “Next” on the Welcome Screen:

GSMRoute Bri Unmanaged Programmer Guide

4. Click “Next” to install to the Default location or click the Browse button to choose a different

location:

5. Click “Next” to begin the installation:

6. When the files have been copied click the “Finish” button to exit the installer:

GSMRoute Bri Unmanaged Programmer Guide

4Starting the Programmer

1. Click on the Start Menu, Programs (or All Programs), TelecomFM, Unmanaged

Programmer

The following screen will be displayed:

2. Connect the mains power cable to the GSM Route Bri and wait for the GSM Route Bri to

initialise.

3. Connect the RS232 cable to the Right hand Bus Port connection on the GSM Route Bri

(See Fig 2 of the Installation & User Guide) and the other end into the serial port of the

Laptop or P.C.

GSMRoute Bri Unmanaged Programmer Guide

4. Click on the Communications menu and select the COM port that the GSMRoute is

connected to (if the PC has only 1 serial port it is normally COM1).Select properties and

adjust the port settings as in the diagram below:

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 2

Flow control: None

5. The Unmanaged Programmer software is now ready for use.

GSMRoute Bri Unmanaged Programmer Guide

5Getting Template

Click on the “Get Template” button. The Programmer will now retrieve the Dialler Image from the

unit. The IDENTITY of the product should be displayed giving detail of the Product Type, Serial

Number, Firmware, Hardware.

The display will show Got template if successful.

GSMRoute Bri Unmanaged Programmer Guide

6Edit Template

Click on the “Edit Template” Button and the Template Properties screen will appear:

There are 5 tabs available by clicking on the headings on the top of the screen – GSM-ISDN

Routing, config, management, statistics and Template properties. These options are described on

the following pages:

GSMRoute Bri Unmanaged Programmer Guide

6.1 Statistics Tab

The Statistics screen displays the configuration of the GSM-Route Bri as in the diagram above. A

summary of the above screen for the GSM-Route Bri that is being analysed in this example is as

follows:-

Equipment line condition shows True if detection of terminal equipment is present, and False if not

detected.

Module 1 and Module 2 will show True if the Siemens module is detected, and false if not detected.

Module 1 SIM detected and Module 2 SIM detected – A TRUE value indicates that a SIM Card is

inserted in the corresponding module SIM holder. (In the example above the value is True

therefore SIM Cards have been detected).

Module 1 signal strength and Module 2 signal strength – This value indicates the signal strength

measured by each of the GSM modules. (A value of 10 or more is acceptable).

Network 1 calls and Network 2 calls show the amount of calls made over the chosen network.

Network 1 calls-busy and Network 2 calls-busy, show the amount of calls that went over the PTT

due to the Modules being busy.

Network 1 calls-No network and Network 2 calls-No network show the amount of calls due to no

network coverage.

Network 1 minutes and network 2 minutes show the amount of minutes routed over the chosen

network.

Altri manuali per GSMRoute Bri

Indice

Altri manuali Telecom FM Hardware di rete

Telecom FM

Telecom FM GSMRoute Bri Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente