TeleMann DTR4000CA Manuale utente

DTR4000CA

User Manual

Satellite Solutions

This manual is subject to change without prior notice.

GLOBAL TELEMANN SYSTEMS Inc.

TEL:+1 408 955 7750 / FAX:+1 408 955 7740

2345 Harris Way, Suite 100,

San Jose, CA95131, USA

E-mail : [email protected]

WWW : http://www.telemann.com

DTR4000CA Safety Precautions

Table of Contents

INTRODUCTION.................................................................................................................................................6

ABOUT THIS MANUAL..........................................................................................................................................6

GENERAL DESCRIPTION........................................................................................................................................6

GENERAL FEATURES.............................................................................................................................................6

HARDWARE DESCRIPTION.............................................................................................................................7

FRONT PANEL CONFIGURATION............................................................................................................................7

REAR PANEL CONFIGURATION .............................................................................................................................9

HOW TO CONNECT YOUR DTR4000CATO VARIOUS SYSTEMS .........................................................................10

REMOTE CONTROL........................................................................................................................................12

REMOTE CONTROL UNIT....................................................................................................................................12

SYSTEM SET-UP................................................................................................................................................14

BASIC MENU OPERATION ...................................................................................................................................14

FLOW OF MENU SYSTEM....................................................................................................................................15

AUTOMATIC CHANNEL SET-UP...........................................................................................................................17

Automatic channel set-up for a satellite........................................................................................................17

Automatic channel set-up for a transponder.................................................................................................17

MENU OPERATION..........................................................................................................................................18

MAIN MENU.......................................................................................................................................................18

CHANNEL GUIDE................................................................................................................................................18

TV and Radio Channel Guide........................................................................................................................18

CHANNEL LIST ...................................................................................................................................................19

TV and Radio Channel List ...........................................................................................................................19

PARENTAL CONTROL..........................................................................................................................................19

PIN Code / TV and Radio Lock.....................................................................................................................19

INSTALLATION ....................................................................................................................................................20

PIN Code ?....................................................................................................................................................20

LNB Configuration........................................................................................................................................21

Channel Search .............................................................................................................................................22

Edit Channels................................................................................................................................................23

Edit TV Channel..........................................................................................................................................................23

Edit Radio Channel......................................................................................................................................................24

Add to Favorite.............................................................................................................Error! Bookmark not defined.

Edit Favorite Channel...................................................................................................Error! Bookmark not defined.

System Settings.................................................................................................Error! Bookmark not defined.

Change PIN......................................................................................................Error! Bookmark not defined.

PIN Code......................................................................................................................Error! Bookmark not defined.

Receiver Update...............................................................................................Error! Bookmark not defined.

Auto Installation...............................................................................................Error! Bookmark not defined.

ACCESSGATE................................................................................................ERROR! BOOKMARK NOT DEFINED.

Entitlement........................................................................................................Error! Bookmark not defined.

Group Entitlement........................................................................................................Error! Bookmark not defined.

Channel Entitlement.....................................................................................................Error! Bookmark not defined.

Remainder Token List...................................................................................................Error! Bookmark not defined.

Usage-record....................................................................................................Error! Bookmark not defined.

Amount of record .........................................................................................................Error! Bookmark not defined.

List of Record...............................................................................................................Error! Bookmark not defined.

Modify Smart Card PIN....................................................................................Error! Bookmark not defined.

TROUBLE SHOOTING...................................................................... ERROR! BOOKMARK NOT DEFINED.

OSD DISPLAY MESSAGE..............................................................................ERROR! BOOKMARK NOT DEFINED.

FRONT PANEL DISPLAY MESSAGE................................................................ERROR! BOOKMARK NOT DEFINED.

TECHNICAL SPECIFICATIONS...................................................... ERROR! BOOKMARK NOT DEFINED.

FACTORY DEFAULT SATELLITE INFORMATION.................... ERROR! BOOKMARK NOT DEFINED.

DTR4000CA Safety Precautions

RADIO FREQUCNCY INTERFERENCE STATEMENT

Note : This equipment has been tested and found to comply with the limits for a Class B

Digital device, pursuant to part 15, Subpart B of the FCC Rules. This equipment generates,

Uses, and can radiate radio frequency energy. If not installed and used in accordance with

The instructions, it may cause interference to radio communications.

The limits are designed to provide reasonable protection against such interference in a

Residential situation. However, there is no guarantee that interference will not occur in a

Particular installation. If this equipment does cause interference to radio or television

Reception, which can be determined by turning the equipment on and off, the user is

Encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna of the

affected radio or television.

Increase the separation between the equipment and

the affected receiver.

Connect the equipment and the affected receiver to

power outlets on separate circuits.

Consult the dealer or an experienced radio/TV

technician for help.

DTR4000CA Safety Precautions

SAFETEY PRECAUTIONS

This IRD has been manufactured to meet international safety standards.

Please read carefully the following safety precautions before you handle the IRD.

MAINS SUPPLY Use only 85-265VAC 50/60Hz.

LOCATION Locate the IRD indoor place properly to prevent any hazards or

malfunctions from lightening, raining and direct sunlight.

CLEANING 1. Disconnect the IRD power cord from the wall socket before

cleaning it.

2. Use a cloth lightly dampened with water (no solvents) to clean

the exterior of the IRD.

OVERLOADING Do not overload wall outlets, extension cords or adapters. These

can cause fire or electrical shock.

VENTILATION 1. Do not block the decoder’s ventilation slots.

2. Ensure that a free airflow is maintained around the IRD.

3. NEVER stand the IRD on soft furnishings or carpets.

4. Do not use or store the IRD where it is exposed to direct

sunlight or near a heater. NEVER stack other electronic

equipment on top of the IRD.

LIQUIDS Keep liquids away from the IRD.

SAMILL OBJECTD Coins or other small objects must be kept away from the IRD. They

can fall through the ventilation slots of the IRD and cause serious

damage.

ATTACHMENTS Do not use any attachments that are not recommended.

These may cause hazards or damage the equipment.

CONDITIONALACCESS

(CAM) and/or COMMON

INTERFACE MODULE

Main power cord must be disconnected before inserting or

removing the CA Module and/or CI Module

CONNECTION TO THE

SATELLITE DISH LNB Before connecting or disconnecting the cable from the satellite dish

to the IRD, disconnect the IRD from the main power.

FAILURE TO DO SO CAN DAMAGE THE LNB.

EARTHING The LNB cable MUST BE EARTHED to the system earth for the

satellite dish.

The earthling system must comply with SABS 061.

LIGHTNING 1. It is recommended that the IRD should remain connected at all

times to the main power supply and satellite dish (except when

working on the LNB).

2. However, the Manufacturer’s instructions for safeguarding

other equipment connected to the IRD, i,e, TV set, etc., must

be followed during lightning storms.

3. Lightning protection devices for the terrestrial antenna, mains,

LNB and the modem telephone line, are essential.

SERVICING 1. Do not attempt to service this product yourself.

2. Refer all servicing to qualified service agents.

DTR4000CA Introduction

Introduction

About This Manual

This manual describes how to install and operate the Model DTR4000CA. Only

qualified personnel should handle any problems beyond this manual.

General Description

The DTR4000CA is a high-performance IRD (Integrated Receiver Decoder).

DTR4000CA is fully compliant with the MPEG2 based DVB transmission

standards for in-home reception of satellite digital broadcast services such as digital

TVs and radio channels.

General Features

Features equipped in DTR 4000CA are as follows :

Fully compliant with MPEG2 based DVB transmission standards

Fully Universal Tuner with 950-2150MHz

QPSK Demodulator

Extended Symbol Rate (2-45MS/s)

SCPC and MCPC, C-/Ku-bands

Automatic Detection of Video Polarity

Automatic Detection of Forward Error Correction

Automatic Channel Surfing Function

Automatic NTSC/PAL Detection

Simple Video Converter (NTSC PAL)

Lip-sync Error Correction Function

Wide PLL Modulator (CH21-69, PAL-B, G, I, D, K)

Useful High Speed System Port for System Diagnostic and Upgrade

DiSEqC1.0 LNB Control Software

TV/VCR scart connectors

Teletext : CCIR/ITU-R Broadcast Teletext System B

Smart Card interface for CAS

Simultaneous decoding of up to Max. 32 PIDs with the exception of A/V

Internal Modem (Optional)

User-friendly defined On-screen-display (OSD)

DTR4000CA Hardware Description

Hardware description

Here, you will be given the explanation of the front and rear panel of DTR4000CA. Each of

display, ports, connections will be explained.

Front Panel Configuration

1LED DISPLAY

This shows the channel number or other information as follows :

During power is off, the dash ‘-‘ will be displayed at each digit, which

indicates that your DTR4000CA is in stand-by mode. Immediately after your

decoder turns on, ‘C . . .’ will light up at each digit, which means that your

DTR4000CA is ready to operate.

If your DTR4000CA locks a channel, its channel number will be displayed.

Whenever you change the channel, the number of the changed channel will be

displayed.

2REMOTE SENSOR

It receives the infrared signal from Remote Control and operates your

DTR4000CA.

3



Smart Card and/or PCMCIA Card Slot (Option), or Not Used

These two slots can be used either for Conditional Access System with Smart

card, or Common Interface Module with PCMCIA card, or may not be used at

all in case of free-to-air only set-top-box according to the option configuration

DTR4000CA Hardware Description

of the DTR5000N.

When you want to watch Pay-per-view TV program or enjoy Internet service

on a usage basis, you should purchase a smart card or PCMCIA card from the

service provider and insert it into this slot. The detailed usage explanation will

come with the card that you purchased.

5CHANNEL DOWN

You can sequentially select the previous service by pressing this DOWN key.

6POWER

This key allows you to turn your DTR4000CAon or off.

7CHANNEL UP

You can use this key to select the next channel sequentially.

DTR4000CA Hardware Description

Rear Panel Configuration

The following diagram shows the DTR4000CA with analog board. Here the dotted line can be

replaced with the Modem board (option) below.

1LNB IN

Satellite antenna input terminal. The LNB power (14/18V) and the switching

signals (22KHz/DiSEqC) are also supplied to LNB through this terminal.

2LNB OUT

It is for connecting another STB to your DTR4000CA. Connect this terminal

to LNB IN terminal of the other STB via RF cable.

3RS-232 serial port

An operator for customer services can use this port for the transmission of the

preprogrammed channel information from a PC to the DTR4000CA. Or this

port can also be used for main board testing and software upgrading.

4AUDIO L/R output terminals

Connect these terminals to audio L/R input terminals of TV, VCR, or Hi-Fi

audio system.

5VIDEO output terminal

Connect this terminal to video input terminal of TV or VCR.

6S-VIDEO output terminal

DTR4000CA Hardware Description

This terminal is connected to S-VIDEO input terminal of TV or VCR to output

S-VIDEO signal.

7TV SCART connector

Connect this connector to that of TV via a SCART cable.

8Modem Port (Option)

When you use Conditional Access System, you should use modem to send

your usage information to the operator.

9VCR SCART connector

Connect this connector to that of VCR via a SCART cable.

10 0/12V OUT

Connect this terminal to an external 0/12Volt switch box.

11 ANT IN

Connect this terminal to a terrestrial UHF antenna via coaxial cable.

12 TV OUT

Connect this terminal to the input of TV or VCR via a coaxial cable.

13 POWER INPUT

Connect the power cord of AC85V to 265V, 50/60Hz

14 Ground

How to Connect Your DTR4000CA to Various Systems

As shown in the figure below, you can connect your DTR4000CA to a TV set, a

VCR and a Hi Fi system. Consult your local supplier for assistance in setting-up

your system best suited to your requirements.

CAUTION !

Please DO NOT plug in the main power supply cord until you have

finished all other connection!

Indice

Manuali Ricevitore TV popolari di altre marche

NEC

NEC PX-TUAN-01 Manuale utente

Edision

Edision Piccollino Manuale utente

Matsui

Matsui DTR1 Manuale utente

Dyon

Dyon Raptor Manuale utente

Strong

Strong SRT 2401 Istruzioni operative

TerraTec

TerraTec CINERGY DT USB XS DIVERSITY Manuale di istruzioni

Haier

Haier 34F9K Manuale utente

TechniSat

TechniSat DigiCom 1 Manuale utente

Haier

Haier LT19A1 Manuale utente

Triax

Triax CR 317 Manuale utente

DirecTV

DirecTV D10-300 Manuale utente

Motorola

Motorola VIP2502W Manuale utente

ActionTec

ActionTec WirelessTV Manuale utente

Motorola

Motorola VIP1200 Series Manuale utente

Xoro

Xoro HRT 1300 Manuale utente

Motorola

Motorola DH6200 Manuale utente

Manhattan

Manhattan Plaza DS-100 Manuale utente

Micro Prose

Micro Prose MPI-500 Manuale utente