Telenot Complex 200H BT 820 Manuale utente

INTRUDER ALARM CONTROL

PANEL

complex200H

complex 400H

Version (09) USER MANUAL english

BT820/830/840/800

User notes

Do not open the product. All installation and main-

tenance work may only be carried out by an expert

installer.

The user manual describes an intruder alarm control pa-

nel that is installed in accordance with VdS guidelines.

Exceptions are indicated in the text.

Illustrations are intended to help the reader to under-

stand the content in general, and can deviate from the

actual design.

1 User notes

Before using the product, read the user manual carefully

and keep it for future reference.

Table of content

2 Table of content

1 User notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Table of content . . . . . . . . . . . . . . . . . . . . . . .3

3 Terms, abbreviations, and symbols . . . . . . . . . . . . 5

3.1 Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.2 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.3 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 Basics of the intruder alarm system . . . . . . . . . . 10

4.1 Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.2 Partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4.3 Setting states. . . . . . . . . . . . . . . . . . . . . . . . . 11

4.3.1 Externally set . . . . . . . . . . . . . . . . . . . . . . . . 11

4.3.2 Internally set . . . . . . . . . . . . . . . . . . . . . . . . 12

4.3.3 Unset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.3.4 Alarm status and resetting . . . . . . . . . . . . . . . 13

4.4 Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5 Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.1 Structure of touch keypad BT800/801. . . . . . . . . 15

5.1.1 "Keypad" screen page. . . . . . . . . . . . . . . . . . . 15

5.1.2 "Indication panel1/2" screen page . . . . . . . . . . 19

5.1.3 "Overview" screen page . . . . . . . . . . . . . . . . . 20

5.1.4 "Switching Functions" screen page . . . . . . . . . . 20

5.1.5 Settings menu . . . . . . . . . . . . . . . . . . . . . . . 21

5.2 Structure of BT820 . . . . . . . . . . . . . . . . . . . . . 22

5.3 Access levels . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.4 Menu structure . . . . . . . . . . . . . . . . . . . . . . . 24

5.4.1 Alarm memory . . . . . . . . . . . . . . . . . . . . . . . 25

5.4.2 Indication test . . . . . . . . . . . . . . . . . . . . . . . 25

5.4.3 Walk test. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.4.4 Disable input group. . . . . . . . . . . . . . . . . . . . 26

5.4.5 Override setting . . . . . . . . . . . . . . . . . . . . . . 27

5.4.6 Changing the keypad code . . . . . . . . . . . . . . . 28

5.4.7 Reset tamper . . . . . . . . . . . . . . . . . . . . . . . . 28

5.4.8 Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.4.9 Event memory . . . . . . . . . . . . . . . . . . . . . . . 29

5.4.10 Alarm counter . . . . . . . . . . . . . . . . . . . . . . . 30

5.4.11 Disabling of keypad code . . . . . . . . . . . . . . . . 30

5.4.12 Disable comlock/cryplock code. . . . . . . . . . . . . 31

5.4.13 comlock/cryplock identiﬁcation . . . . . . . . . . . . 31

5.4.14 Service enabling . . . . . . . . . . . . . . . . . . . . . . 32

5.4.15 App enabling . . . . . . . . . . . . . . . . . . . . . . . . 32

5.5 Operation with keypad. . . . . . . . . . . . . . . . . . . 33

5.5.1 External setting . . . . . . . . . . . . . . . . . . . . . . 33

5.5.2 Internal setting. . . . . . . . . . . . . . . . . . . . . . . 34

5.5.3 Unsetting . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5.5.4 External setting with delayed area function . . . . 35

5.5.5 Unsetting with delayed area function . . . . . . . . 35

5.5.6 Resetting alarms, faults, and battery warnings . . 36

6 Switching device . . . . . . . . . . . . . . . . . . . . . . 37

6.1 Structure of the reader cryplockR/K-MD . . . . . . . 37

6.2 Structure of the reader comlockR-ED . . . . . . . . . 37

6.3 Operation with reader . . . . . . . . . . . . . . . . . . . 38

6.3.1 External setting . . . . . . . . . . . . . . . . . . . . . . 38

6.3.2 Unsetting . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6.3.3 Change numeric-pad code with change code . . . 42

Table of content

6.4 Operation with switching lock . . . . . . . . . . . . . . 43

6.4.1 Shunt lock . . . . . . . . . . . . . . . . . . . . . . . . . . 43

6.4.2 Pulse switching lock . . . . . . . . . . . . . . . . . . . 43

7 System does not set. What can I do? . . . . . . . . . . 44

8 Maintenance and care. . . . . . . . . . . . . . . . . . . 46

9 Behavior in case of analarm . . . . . . . . . . . . . . . 47

9.1 Alarm (when externally set) . . . . . . . . . . . . . . . 47

9.2 Alarm (when internally set). . . . . . . . . . . . . . . . 47

Terms, abbreviations, and symbols

3 Terms, abbreviations, and symbols

3.1 Terms

Alarm

Warning about danger to life and property.

Alarm counter

A counter built into the intruder alarm control panel that cannot

be reset, which counts every intrusion, hold-up, or tamper alarm

(for documentation purposes).

Indication panel

Part of some keypads. The indication panel shows the status of

16 or 32input groups by means of LEDs. It also oﬀers the option

of disabling/enabling input groups for setting (depending on

the parameterization).

Response authority

A person appointed by the responsible operator, who receives

messages and initiates the necessary measures (assistance),

e.g. surveillance and security service or police.

Responsible operator

The person responsible for operating the intruder alarm system

and the group of people authorized by him/her to operate it.

Motion detector

A detector that detects and reports movements within its

surveillance area.

Shunt lock

A switching device in the form of a lock that is integrated in the

door and can be used to set and unset the system. The shunt

lock also prevents setting for as long as a setting prevention

criterion is present (see Coerciveness).

Intruder alarm system

The entire system with all detectors and the intruder alarm

control panel.

Installer

A specialist ﬁrm that installs intruder alarm systems and carries

out service and maintenance work. The employees of the instal-

ler ﬁrms are trained by the manufacturer of the intruder alarm

system. The installer ﬁrms must be approved by VdSSchaden-

verhütungGmbH in order to install systems in compliance with

VdS directives.

First alarm indication

The ﬁrst input (dedicated signal or input group) triggered in

the event of an alarm is specially indicated on the keypad, e.g.

by blinking of the indicator. The ﬁrst alarm indication indicates

where the intruder entered the property.

Externally set

The responsible operator sets the system when he/she is not

present in the property. The activation of an alarm results in an

external alarm.

Terms, abbreviations, and symbols

External alarm

Alerting using an externally installed warning device (siren and

strobe beacon) and/or the sending of a message to the response

authorities.

False alarm

An alarm for which no danger actually exists. The following

causes can lead to false alarms:

Persons or pets that are accidentally locked in

Subsequent structural changes in the surveillance area of

detectors, e.g. curtains waving and air drafts

Insuﬃcient maintenance of the system

Remote alerting

Alerting whereby a message is sent to the response authorities.

Walk test function

The walk test is used to check and conﬁgure the surveillance

area of a motion detector. The LED on the detector is illumina-

ted as long as a person is moving in the surveillance area and is

detected by the detector.

Glass-break detectors

A detector that detects and reports the breakage of a glass

pane. You can recognize the triggered detector by its LED.

Transponder

An electronic key for operating an electronic switching device.

The transponder for actuation of the switching procedure is

held in front of the reader belonging to the switching device.

The transponder is identiﬁed by a near-ﬁeld wireless connection.

Pulse switching lock

A switching device in the form of a lock that is installed beside

the door and can be used to set and unset the system.

Internally set

The responsible operator sets the system when he/she is present

in the property. The activation of an alarm results in an internal

alarm.

Internal alarm

A signal is output by means of audible warning devices that are

only installed within the property under surveillance. An inter-

nal alarm is only executed if the system is in the unset (e.g. ﬁre

detector) or internally set state.

LED

Light-emitting diodes are reliable, long-lasting and energy-sa-

ving electronic components. LEDs of diﬀerent colors are used.

Magnetic contact

A contact that detects and reports the opening of, for example,

doors and windows.

Terms, abbreviations, and symbols

Input group

An input group combines multiple dedicated signals so that

they can be indicated or disabled together on the keypad, e.g.

motion detectors if the system is internally set.

Dedicated signal

An alarm source (detectors or inputs) that is individually detec-

ted, processed, and indicated by the intruder alarm control panel.

Input

Physical connection of multiple detectors to a common input on

the intruder alarm control panel. The processing performed by

the intruder alarm control panel as well as the indication on the

keypad is equivalent to that of an individual dedicated signal.

Alternative power source

If there is a power supply failure of the 230 V mains supply, the

function of the entire system must be guaranteed for at least

12hours (in compliance with VdS classA). To meet this require-

ment, the intruder alarm control panel is ﬁtted with a built-in

rechargeable battery. The rechargeable battery is monitored by

the intruder alarm control panel. In the event of a power supply

fault, the intruder alarm system cannot be set (coerciveness).

Tamper contact

The intruder alarm system components' lids or parts of the

housings that can be opened are equipped with tamper contacts

that detect and report when the components are opened (tam-

per protection).

Switching device

Switching devices are used to set and unset the system. For ex-

ample, it can be a shunt lock, a bolt switching lock, a switching

lock or a reader.

Delayed area function

The delayed area function is used for setting or unsetting the

intruder alarm system from a keypad located within the premi-

ses to be supervised. In this case, an exit time is required to allow

persons to exit the property after setting the system on the key-

pad. At the same time, an entry time is required to allow entry

into the partition for unsetting the system without activating an

alarm. This function is not in compliance with VdS.

Blocking element

If an intruder alarm system is set, the blocking element blocks

the door to the partition. Unintentional entry into the partition

and the resulting activation of a false alarm are not possible

(coerciveness).

Terms, abbreviations, and symbols

Lock state monitoring

The locks on all access doors to partitions are ﬁtted with bolt

contacts that monitor the lock state of the doors. It ensures the

coerciveness when the system is set. The partitions can only be

set if all access doors are locked. The status of lock state monito-

ring is displayed on the keypad.

Coerciveness

On the one hand, the coerciveness prevents the intruder alarm

control panel from being set as long as a setting prevention

criterion is present, e.g. if a detector is activated, a door/window

opened, or if a fault state is pending. On the other hand, the

coerciveness prevents the unintentional entry into the partition

as long as the system is still set (see Blocking element).

Unset

The system is not set. Nevertheless, some functions are still

active, e.g. tamper monitoring, fault monitoring, evaluation of

the technical detector, etc.

VdS (VdSSchadenverhütungGmbH)

An institution supported by the German Insurance Industry

whose functions include drafting standardized guidelines and

testing criteria for intruder alarm systems and carrying out ap-

proval testing of intruder alarm system concepts and specialist

ﬁrms.

VdS class

Depending on the threat potential and the number of valuable

items in the building, the insurance company can prescribe an

intruder alarm system with a VdS class (protection class). There

are three VdS classes: A, B and C (VdS classC calls for the stric-

test protective measures).

Transmission device

A telecommunications device built into the intruder alarm

control panel, which automatically transmits alarm, state, and

fault messages via a telecommunication network to an alarm

receiving center (response authority).

Silent alarm

Alerting which involves sending a message to the response

authorities without activating an internal/external alarm. This

alarm is used for hold-ups.

Terms, abbreviations, and symbols

3.2 Abbreviations

General

IACP = Intruder alarm control panel

TD = Transmission device

Partition status

Ea = External alarm

Ee = External exit time

Es = Externally set

Ev = External entry time

Ia = Internal alarm

Ie = Internal exit time

Is = Internally set

Iv = Internal entry time

Ua = Unset alarm

Us = Unset

3.3 Symbols

Important notice, order

Tips, recommendations, useful information

Usage not in compliance with VdS directives

Legend

Sequence of action

Switching device

Buzzer

LED

BT = Keypad

Basics of the intruder alarm system

4 Basics of the intruder alarm system

4.1 Structure

External warning devices

Strobe BeaconSiren

Window

contact

Hold-up

detector

Motion

detector

Internal

warning

devices

Glass-break

detector

Keypad

Door contact

Switching

device

IACP

complex 400H

Power supply unit

with rechargeable

battery

230 V ~ mains connectionTelephone connection

Structure of an intruder alarm system

The intruder alarm control panel (IACP) controls and monitors

all functions. It supplies the entire system with electrical power.

For this, the IACP features an integrated power supply unit

which converts the 230V mains supply to 12V DC.

The TD (transmission device) transmits alarm, state, and fault

messages to a response authority, e.g. surveillance and secu-

rity service. The TD uses the telecommunications network for

transmission.

Messages to the responsible operator on site are shown on the

keypad display. With the help of the numeric pad on the keypad,

the responsible operator can operate the system, e.g. look up

stored information or disable input groups. Any position within

the supervised property, e.g. the IACP housing, is suitable as a

mounting location.

The detectors monitor the property, e.g. magnetic contacs on

doors and windows, glass-break detectors, motion detectors,

etc. They are combined physically into inputs and connected to

the IACP inputs. Consequently, the control panel is continuous-

ly informed about the status of all detectors, e.g. whether a

window is open.

If a detector detects that a window or a door is open, an alarm

should only be activated if the responsible operator has set the

system using the switching device.

The alerting on site is performed by the indoor warning devices

when the system is internally set and by the outdoor warning

devices when it is externally set.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Telenot Pannello di controllo

Telenot

Telenot hiplex 8400H BT 800 Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche

Telenot complex 200H BT 820 Manuale utente

Manuali Pannello di controllo popolari di altre marche