Teletekno Finnflash 1000 Manuale utente
INSTALLATION INSTRUCTION
1
OPTICAL DISTRIBUTION SYSTEM
FINNFLASH 1000
FINNFLASH 1000
2
OPTICAL DISTRIBUTION SYSTEM
FINNFLASH 1000
INSTALLATION INSTRUCTION
© ONNINEN TELETEKNO OY 2007
INSTALLATION INSTRUCTION
3
Sisällysluettelo
1 General ........................................................................................................................ 5
2 Components of the system.......................................................................................... 6
3 Unpacking ................................................................................................................... 7
4 Locating and fastening ............................................................................................... 8
4.1 Planning the location....................................................................................................... 8
4.2 Fastening to oor ............................................................................................................. 8
4.3 Fastening to other frame................................................................................................. 9
4.4 Fastening to the wall........................................................................................................ 9
4.5 Earthing........................................................................................................................... 10
5 Termination of outdoor cables ................................................................................. 11
5.1 Termination of cables when outdoor cables are spliced to pigtail cables within
the FINNFLASH 1000 frame...................................................................................... 11
5.1.1 Bringing cables to the frame ............................................................................. 11
5.1.1.1 Cable entry from top................................................................ 11
5.1.1.2 Cable entry from bottom ........................................................12
5.1.2 Preparation and earthing of cables.................................................................. 12
5.1.2.1 Stranded loose tube cable ....................................................... 12
5.1.2.2 Slotted core cable ..................................................................... 13
5.1.2.3 Central tube cable.................................................................... 14
5.1.3 Fibre entry to the splice tray ............................................................................. 14
5.1.4 Installation of the splice module ..................................................................... 15
5.1.5 Installation of the splice trays to the splice module ...................................... 16
5.1.6 Installation of the patch panel .......................................................................... 16
5.1.7 Bringing of pigtail cables for splicing ............................................................. 18
5.1.8 Construction, colour coding and the main properties of the pigtail cable . 19
5.1.9 Preparing pigtail cables for splicing ............................................................... 20
5.1.10 Splicing of bres ................................................................................................ 22
5.1.11 Fastening and earthing of cables .................................................................... 23
5.1.12 Fastening of bre tubes .................................................................................... 24
5.1.13 Finishing the termination ............................................................................... 24
5.2 Termination of cables, when outdoor cables are spliced to pigtail cables outside
the FINNFLASH 1000 frame...................................................................................... 25
5.2.1 Bringing the outdoor cables to the splicing point ......................................... 25
5.2.2 Installation of the patch panel.......................................................................... 25
5.2.3 Installation of several patch panels simultaneously ..................................... 26
5.2.4 Bringing the pigtail cables from the FINNFLASH 1000 frame.................. 28
5.2.5 Finishing the termination in the FINNFLASH 1000 frame ....................... 29
5.2.6 Bringing the pigtail cables to the splicing point............................................ 29
5.2.7 Construction, colour coding and the main properties of the pigtail cable . 30
5.2.8 Preparing pigtail cables for splicing ...............................................................30
5.2.9 Splicing of bres ................................................................................................. 32
6 Side and back covers ................................................................................................. 33
7 Patch cords ................................................................................................................ 34
7.1 Patch cord installations into the FINNFLASH 1000 patch panels ......................... 35
7.2 Patch cords inside the FINNFLASH 1000 frame ...................................................... 36
7.3 Patch cords between the FINNFLASH 1000 frame and equipment racks............ 37
7.4 Patch cords between the FINNFLASH 1000 frames................................................. 39
8 FINNFLASH 1000 Storage Rack for patch cords .................................................... 40
9 ADC FibreGuide® system.......................................................................................... 42
9.1 Preparation ...................................................................................................................... 42
9.2 Installing supports ......................................................................................................... 43
9.3 Installing horizontal components ............................................................................... 43
9.4 Installing vertical components..................................................................................... 43
9.5 Installing covers, end caps, and accessories............................................................... 43
9.6 Completing and checking the system .........................................................................44
9.7 Examples of the installed FiberGuide® systems......................................................... 45
FINNFLASH 1000
4
INSTALLATION INSTRUCTION
5
1 General
In distributors the cables are terminated and connected to other cables or to equipment. e number of cables
coming to and leaving from a distributor may be up to hundreds of cables depending on the type and purpose
of the distributor. It is very important that the distributor including all cable installations has been designed,
planned and installed with appropriate skill and knowledge.
FINNFLASH 1000 Optical Distribution System has been designed to meet all the critical requirements of
a well functioning and reliable distributor. It is a result of the long and profound product development and
experience of Teletekno and its customers. All substantial aspects of initial build-up, use and maintenance
have been carefully taken into account. Modular design, pre-assembled and pre-terminated patch panels and
a smart cable management system guarantee easy installation, changes, expansions and other maintenance
practices during the whole life time.
e main features of FINNFLASH 1000 are the following:
• high bre capacity
• superior cable management
• access from the front side
• pre-assembled patch panels
• modular and clear construction
• easy to install, maintain and expand
• dimensions according to the ETSI standards
FINNFLASH 1000
6
2 Components of the system
e FINNFLASH 1000 system consists of the components shown in the table below. With these components
the network builder can construct appropriate distributor systems for his needs and purposes.
No. Component Short description Product
code
1FINNFLASH 1000 Optical Distribution
Frame, 2200 m
ODF frame with a turnable inner frame and fibre guides, height
2200 m 692600
FINNFLASH 1000 Optical Distribution
Frame, 2000 m
ODF frame with a hinged inner frame and fibre guides, height
2000 m 692601
2FINNFLASH 1000 Patch panel 24 with
4 m cable
Pre-assembled patch panel with:
• 12 x SC-D connectors
• pre-terminated MiniXtend cable, length 4 m
• 24 SM fibres
693701
FINNFLASH 1000 Patch panel 48 with
4 m cable
Pre-assembled patch panel with:
• 24 x SC-D connectors
• pre-terminated MiniXtend cable, length 4 m
• 48 SM fibres
693711
3FINNFLASH 1000 Patch panel 24 with
customer specified length of cable
Pre-assembled patch panel with:
• 12 x SC-D connectors
• pre-terminated MiniXtend cable of a customer specified
length
• 24 SM fibres
693700
FINNFLASH 1000 Patch panel 48 with
customer specified length of cable
Pre-assembled patch panel with:
• 24 x SC-D connectors
• pre-terminated MiniXtend cable of a customer specified length
• 48 SM fibres
693710
4MiniXtend cable, 24 SM Corning MiniXtend cable with 24 SM fibres, outer diameter 7
mm, fibre colour code according to ANSI/TIA-598-C.
(Same cable type is used in 693700 and 693701)
641110
MiniXtend cable, 48 SM Corning MiniXtend cable with 48 SM fibres, outer diameter 7
mm, fibre colour code according to ANSI/TIA-598-C.
(Same cable type is used in 693710 and 693711)
641111
5FINNFLASH 1000 Splice module Splice module for 18 FINNFLASH 1000 splice trays with a
capacity of 48 fibres each 692602
6FINNFLASH 1000 Splice tray Splice tray for FINNFLASH 1000 splice module, capacity of 48
fibres 692324
7FINNFLASH 1000 Storage rack for
patch cords, 2200 m
Storage rack for managing and storage of patch cords, height
2200 m 692602
FINNFLASH 1000 Storage rack for
patch cords, 2000 m
Storage rack for managing and storage of patch cords, height
2000 m 692603
8FINNFLASH 1000 Side cover, 2200 m Side cover for ODF frame, height 2200 mm 692605
FINNFLASH 1000 Side cover, 2000 m Side cover for ODF frame, height 2000 mm 692606
9FINNFLASH 1000 Back cover, 2200 m Back cover for ODF frame, height 2200 mm 692607
FINNFLASH 1000 Back cover, 2000 m Back cover for ODF frame, height 2000 mm 692608
10 FINNFLASH 1000
Wall Mounting Kit
With this kit FINNFLAH 1000 frame can be fastened to the wall
from the top 692640
Special modules with splitters or WDMs are available for the system.
INSTALLATION INSTRUCTION
7
3 Unpacking
Unpack the delivery package as follows:
• Remove the binding straps.
• Remove the covering cardboard and the wrapping cardboard.
• Remove the cellular plastic surrounding the frame.
• Unfasten the frame from the pallet by opening the fastening bolts.
• Check and assure that no damages have been caused during the transportation.
• Inform the supplier of possible damages.
• Li the frame and move it to its location, which has been planned before. Caution: e weight of the
frame is approx. 100 kg.
FINNFLASH 1000
8
4 Locating and fastening
4.1 Planning the location
Plan and prepare carefully the location of the frame before fastening. e following aspects should be consi-
dered when choosing the location:
• Accessibility to pathways, such as trays and shelves
• Floor loading: the weight of the equipped frame can exceed 300 kg
4.2 Fastening to floor
Fasten the frame to the oor with 4 screws at each corner of the bottom.
Required components: 4 pcs of M8 screw with washers (not included in the delivery)
INSTALLATION INSTRUCTION
9
4.3 Fastening to other frame
e frame can be fastened also to another frame. e fastening points are in front and back columns both on
the right and le.
Required components: 4 pcs of M6 screw with nuts and washers (not included in the delivery)
4.4 Fastening to the wall
e frame can be fastened to the wall from the top with FINNFLASH 1000 Wall Mounting Kit, see picture.
Required products and components:
• FINNFLASH 1000 Wall Mounting Kit, 692640
• 6 pcs of M6 screw with nuts
• 2 pcs of M5 screws and nuts
FINNFLASH 1000
10
4.5 Earthing
Connect the frame to the equipotential or earthing terminal of the telecommunications room. e earthing
conductor shall be min. 16 mm2copper wire.
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
