Telstra GO Mobile Manuale utente
Registration Instructions
Tips & Tricks
Telstra GO Mobile
Smart Signal Repeater
Quick Start Guide
Telstra GO is an evolved cellular repeater
design that can amplify cellular signals.
Connect a single Donor External Antenna to
receive the macro-network signals, and then
a single indoor Service Antenna where you
need service, and Telstra GO will do the rest
automatically once you register.
• Keep Donor and Service Antennas separated/isolated from each other for best performance
• For best performance, the cable between the Donor Antenna and GO unit should be as short as possible
• Use sealant if any connections are exposed to elements
Telstra GO Smart Signal Repeater
The status indicator LED will be blinking RED. Wait for the system to
complete the network selection which can take between 5 to 7 minutes.
When complete, the user interface will indicate that registration is
required from the Wave App.
The status
indicator LED
AUTO
3G
4G LTE
To install your Telstra Go Mobile Smart Signal Repeater, follow the instructions in the Quick Start
Guide.To register your Telstra Go Mobile Smart Signal Repeater follow the instructions below:
YOU MUST REGISTER THIS DEVICE BEFORE IT WILL WORK
STEP 1
STEP 2 STEP 2
Smartphone or Tablet
With your smartphone or tablet,
complete registration by using the
Cel-Fi WAVE application (Android
or iOS).*
Cel-Fi Desktop
Application
Optionally, use the Cel-Fi
desktop application to
complete registration.
Go to the App Store or the Google Play Store and search
for “Cel-Fi WAVE” to download the free app.
Launch the Cel-Fi WAVE app in close proximity to the
Telstra GO Mobile Unit.
Once the application has connected to the Telstra GO Mobile
Smart Signal Repeater, you will be prompted to register.
* Requires Bluetooth 4.1 and Android 4.3 or above.
From your computer, visit www.cel-fi.com/software and
download the appropriate desktop application.
Attach a Micro-USB (not included) cable from your computer
to the Telstra GO Mobile Unit.
Launch the Cel-Fi WAVE desktop application.
Once the application has connected to the Telstra GO Mobile
Smart Signal Repeater, you will be prompted to register.
STEP 3:
STEP 4:
STEP 5:
STEP 3:
STEP 4:
STEP 6:
STEP 5:
Connect/Pair
to Smart Signal
Repeater OR
Connect to
Smart Signal
Repeater
Copyright © 2019 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are
registered trademarks of Nextivity Inc.All other trademarks or registered trademarks listed belong to their respective
owners.Designed by Nextivity Inc in California. qsg_go-mobile-telstra-eng_19-1105
For more information and helpful videos about the installation and registration of the Telstra GO system, please visit www.
cel-fi.com/register. As part of the registration process Telstra will collect your private information including name, contact
details and location.Please see our Privacy Policy at https://www.telstra.com.au/privacy/privacy-statement for more details.
For Telstra Support, call:
13 2200 or
13 2000 for Business Customers
telstra.com/smartantenna
IN THE BOX
• Telstra GO Mobile Repeater
• Quick Start Guide
• Donor & Service Antenna
• Warranty Card
• Mounting Screws
• 12V CLA Power Supply Unit
7
8
If your unit has a 12V CLA with a grounding tab on the
end, then:
(1) attach that tab to the grounding
post on the Telstra GO prior to
attaching to power.
(2) Use the nut (included)
(3) to secure the tab to the unit.
If your Telstra GO unit does not include a grounding post, simply attach
the grounding tab to any available ground source.
GROUNDING
TAB
12V CLA
1
3
Install Service Antenna
For best performance make sure
there is 50cm of metal around the
base of the antenna.
Mount your Donor Antenna on the exterior of the
vehicle, towards the rear, according to its design,
and the type of vehicle it’s being used with. Make
sure you consider the cable connection to the
Telstra GO unit with your location choice.
Install Service Antenna in the cab, towards the
front, where coverage is needed. Ideally, there should
be substantial material, like the metal of the roof,
between the Donor and Service Antennas, to improve
isolation.
DONOR ANTENNA
Install Donor Antenna
SERVICE ANTENNA
SERVICE ANTENNA
SERVICE ANTENNA
SERVICE ANTENNA
DONOR ANTENNA
Telstra GO Mobile Installation
Mount Telstra GO
Find a good mounting location in your vehicle. Location
should have airflow and be secure from contact with
external objects.
Make sure the unit is within cable range of the 12V
power supply on your vehicle.
Best to make sure all cable lengths support the intended
mounting location BEFORE permanent mounting.
TELSTRA GO
TELSTRA GO
Connect Donor & Service Antennas
to the Telstra GO Unit
LEFT SIDE: Service Antenna
Connector
RIGHT SIDE: Donor Antenna
Connector
DONOR ANTENNA
DONOR ANTENNA
TOP VIEW
STATUS
INDICATOR
MODE
Plug in Telstra GO & Select Mode
Ground the Telstra GO
(*NOTE: if Error, go to troubleshooting at cel-fi.com/support)
AUTO
3G
4G/4GX
MODE
SELECT
BUTTON
MODE STATUS
INDICATOR
Boosting 3G
Boosting 4G/4GX
Error*
STATUS
INDICATOR
12V POWER
SUPPLY
DONOR ANTENNA
TELSTRA GO
Telstra GO Mobile Smart Signal Repeater www.cel-fi.com
Press the MODE button on the unit to select desired
scanning mode. Status Indicator will blink during the setup
process, and may take a few minutes to complete.
(OPTIONAL: use your smartphone to select mode.
Download the Cel‑Fi WAVE app, and follow the on-
screen instructions.)
NETWORK STRENGTH
TELSTRA GO OPTIONAL
LOCATION
TOP
NUT BOTTOM
NUT
2
Do not plug in the power supply into the
device until installation is complete.
2
I3
4
5
6
Altri manuali Telstra Ripetitore
