Tenways Thermopad Manuale utente

ThermoPad

User Manual

Please read these instructions carefully and take care to use this equipment correctly. Store these instructions

safely for future reference.

Be sure to pass these instructions and the corresponding installation instructions to anyone subsequently

appointed to maintain this equipment. Installation and relocation of this equipment should be carried out by

qualified persons only. Attempts by end users to install or move this equipment may lead to unsafe conditions or

improper operation.

CONTENTS

1. Safety Precautions

………………………………………………………………………………………..

2. LCD Description –Parts Names

………………………………………………………………………………………..

3. ON/OFF Settings

………………………………………………………………………………………..

4. Setting the Temperature

………………………………………………………………………………………..

5. Setting the Fan Speed

………………………………………………………………………………………..

6. Setting the Operation Mode

………………………………………………………………………………………..

7. Setting the Current Date and Time

………………………………………………………………………………………..

8. Setting the Sleep Timer

………………………………………………………………………………………..

9. Setting the Weekly Schedule Timer

………………………………………………………………………………………..

1. SAFETY PRECAUTIONS

Thank You for purchasing the ThermoPad

Read this manual carefully and be sure you understand the information provided before attempting to use the

product

Keep this manual where it is readily accessible after reading it through. If another user operates the product in the

future, be sure to hand over this manual to the new user

Do not install the ThermoPad by yourself, consult a qualified engineer

Do not relocate or reinstall the ThermoPad by yourself, consult a qualified engineer

Do not touch the ThermoPad with wet hands

Do not use the ThermoPad in extreme environment (places exposed to oils, steam, excess sun)

Do not press any button using a sharp object ( a ball pen is acceptable)

Do not wash the ThermoPad.

Never Let the ThermoPad get wet.

Do not clean the ThermoPad with benzene, thinner or other chemicals

Do not modify or repair the ThermoPad

Do not use flammable materials (e.g., hairspray or insecticide) near the product.

Do not disassemble the ThermoPad

2. LCD Description –Parts Names

ON/OFF Button

Press the ON/OFF button to start or stop the system

Modbus Communication Indicator

Schedule Timer Icon

Indicates that a Timer is enabled

Set Temperature Display

Shows the Set Temperature

Day of the Week Indicator

Shows the current day of the week (or the set day when programming the

schedule timer)

SUN MON TUE

WED THU FRY SAT

Clock Display

Indicates the current time (or the set time when programming the schedule

timer)

Timer Indicator

“SLEEP TIMER” –Single Instance Timer Setup

“TIMER” –Weekly Schedule Setup

SLEEP

TIMER

Minimum / Maximum Temperature

Used to program Temperature restrictions (currently not in use)

MIN MAX

Room Temperature

Indicates the Room Temperature

MENU Button

Used to Enter Setting Mode for Date, Time, Sleep Timer, Schedule Timer

etc.

Is displayed when touch next to Navigation Button

CANCEL Button

Touch to SAVE and EXIT

Navigation Buttons UP/DOWN

Used to adjust Operation Mode, Temperature Set point, Date and Time

ON / OFF Settings

Used while setting the timers to activate/deactivate the Timers

Timer Active

Timer NOT Active

Swing Option Button

Setup Indicators

Displayed is some Setup Modes

SETTINGS WAIT CLEANING

Sound on/off indication (currently not in use)

Currently not in use

Malfunction indication

8888

Fan speed button

Indicates the Fan Speed Settings, touch to change

(Low, Medium, High & Auto)

Operation Mode Icon

Indicates the current operation Mode

(Cool, Heat, Dry, Automatic, Auxiliary Heating & Fan)

3. ON / OFF SETTINGS

When the ThermoPad is switched OFF, the screen will display the ON/OFF Button, Schedule Timer, Room

Temperature, Day of the week and Time.

NOTE: In OFF Mode, if the Clock display, Room

Temperature and Schedule Timer are Disabled, the

Screen will show only the ON/OFF Button

Press the ON/OFF Button to switch the unit ON or OFF

4. SETTING THE TEMPERATURE

To change the Set Temperature use the Navigation Buttons

To raise the Room Temperature press

To lower the Room Temperature press

The set temperature changes 1oC each time the button is

pressed

When the Button is held down, the Set Temperature

advances or reswitchs continuosly.

A characteristic BEEP sound will support every touch.

5. SETTING THE FAN SPEED

Depending on the Type of Air Conditioning, ThermoPad allows

selection of up to 4 Fan Speed settings: Low, Medium, High &

Auto.

To change the Fan Speed use the Fan Speed Button

Fan Speed LOW

Fan Speed MEDIUM

Fan Speed HIGH

Fan Speed AUTO

6. SETTING THE OPERATION MODE

Depending on the Type of system, ThermoPad allows to select up to five Operation Mode functions: COOL,

HEAT, AUTO, DRY, HAUX & FAN

To select / change the Operation Mode press the

OPERATION MODE Icon. The OPERATION MODE

Screen will display .

The Operation Mode Screen display will be active for 3

secons after which will return to Default Mode.

Using the NAVIGATION BUTTONS Choose the Operation

Mode Desired

COOL Cooling Operation Mode

HEAT Heating Operation Mode

DRY Dry Operation Mode

AUTO Automatic Operation Mode

HAUX Auxiliary Heating Operation Mode

FAN Fan Operation Mode

NOTE: If the NAVIGATION BUTTONS are not used within 3 seconds, the screen will return to the Default Mode

Indice

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche