Terahertz Technologies VP-150 Manuale utente
VP-150
Video Scope
Users Guide
Terahertz Technologies Inc. 169 Clear
Road Oriskany, New York 13424
TEL: (315) 736-3642
10/2010
VP-150
Video Scope
Users Guide
10/2010
©Terahertz Technologies Inc.
1
Table of Contents
General Information
Package Contents 2
Parts List 3
Basic Operation
Charging the Battery 4
Power On and Off 5
Probe Light 6
Focus Control 7
On Screen Indicator 8
Zoom In / Out 9
Display Brightness 10
Advanced Operations
Laser Light Confirm 11
Computer Connection 12
Computer Software
Software Installation 13
USB Driver Installation 17
Application Software
Operation Method 23
Accessory Setting and Maintenance
Probe Tip Exchange 25
Battery Exchange 26
Safety Information 27
2
3
1. Connect battery charger or car power adapter to DC
power input port.
2. It takes about two and one half hours to fully charge the
battery.
3. During charging cycle, the red charge status lamp is on.
When internal batter is fully charged, the indicator lamp
will show green.
4. When the charger connection is removed, the charge
status lamp is off.
4
5
1. Power On/Off switch controls power of main unit. Push
the power switch to on. The LCD screen will light and
the unit operations starts.
2. Push the power switch to off to power off the unit.
6
1. When The VP-150 is used for visual inspection test on
fiber optic end face, the probe light should be turned
on. Without the probe light, the fiber optic end
face image cannot be displayed on the LCD screen.
2. Meanwhile, the probe light should be turned off if
the probe is used to detect the presence of laser light.
3. To turn on the probe light, push the probe light switch
to the right . The probe light status indicator will be
illuminated.
4. To turn off the probe light, push the probe light switch
to the left. The probe light status indicator will turn
off.
7
1. When a new target object is examined, usually the dis
play image is out of focus. To focus the image, use the
focus ring on the probe.
2. Turn the focus ring to the right or left until the LCD
displays a clear image.
8
Internal Batter Charge Status
Battery charge status icon represents charge status of
internal battery in three steps.
Zoom Ratio
When users adjust zoom ratio value, the current zoom ra-
tio is displayed on the LCD Screen. Zoom Ration Value is
displayed for five seconds after the zoom ratio is changed.
LCD Display Brightness
When users adjust the LCD backlight, the current bright-
ness level value is displayed on the LCD screen. Bright-
ness level value is displayed for five seconds after bright-
ness level value is changed.
Indice
