TERK Technologies OMNITV3A Manuale utente
OMNITV3A
Owner’s Manual / Manual del Propietario / Guide de l’utilisateur
OMNITV3A Flat Antenna
Amplified Indoor Television Antenna
Antena Plana OMNITV3A
Antena de Televisión para Interiores Amplificada
Antenne plate OMNITV3A
Antenne de télévision intérieure avec amplification
EnglishEnglish
1
OMNITV3A
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits
are designed to this equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
radio or television off and on, the user is encouraged to try to correct
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on another circuit.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)
EnglishEnglish
2
OMNITV3A
About Your TERK
OMNITV3A Flat Antenna
Thank you for choosing the TERK OMNITV3A. TERK
antennas are designed to deliver sharp, clear
reception of digital signals. At TERK, our engineering
department is dedicated to designing antennas that
enhance both the latest technology and the aesthetics
of any viewing environment. The OMNITV3A installs
in minutes and is easy to use. The OMNITV3A has
a patented design that lets it receive signals from
360-degrees and work in both the horizontal and
vertical planes, which means it requires virtually no
adjustments once you’ve put it in place.
Before using your antenna, please remove all parts
from the box and read this owner’s manual carefully.
The OMNITV3A antenna package includes the
following items:
1 OMNITV3A Antenna Pro with Built-In Coaxial
Cable
1 Removable Stand
1 Removable In-Line Amplifier with Built-In Coaxial
Cable
EnglishEnglish
3
OMNITV3A
Installing your OMNITV3A
antenna
Find the best location for the Antenna
Before you connect the antenna, determine the best
spot in your home for optimum reception. Visit
www.antennaweb.org to see where your local
broadcasts are coming from. Then, try as much
as possible to avoid obstructions between these
transmitters and your antenna.
Positioning the Antenna
Once you’ve found the best place to set up your
antenna, you have three options for placing it—you
can lay it flat, hang it on the wall, or stand it upright.
The antenna is designed to perform equally well in all
three positions. For most settings, the recommended
position is standing. However, the best position for
your antenna may vary depending on your location
and setting. Television signal waves bounce off of
objects, causing signal reflections that might cause
the antenna to perform better in one location or
orientation over others. Test the antenna in the
different positions before putting it in its permanent
position.
Please Note: Do not place your OMNITV3A near
large metal objects or appliances that could create
interference.
EnglishEnglish
4
OMNITV3A
Installation (continued)
Attaching the Stand
The provided stand attaches to the back of the
OMNITV3A for standing the antenna upright.
To attach the OMNITV3A stand:
1. Line the pegs on the stand with the slots on the
back of the antenna.
2. Insert the pegs in the slots and pull up to lock the
stand into place.
EnglishEnglish
5
OMNITV3A
Installation (continued)
Connecting the OMNITV3A
You can use the OMNITV3A with or without its
amplifier, depending on which connection gives you
the best signal. Using the amplifier provides the best
performance in most situations, so try using it first. If
you notice that you’ve lost channels that you normally
receive, try connecting without the amplifier.
You can connect the OMNITV3A directly to your TV
or use it with a converter box or other tuning device
with an antenna input (such as a cable box or satellite
receiver).
EnglishEnglish
6
OMNITV3A
OMNITV3A Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
Installation (continued)
1. Make sure your TV is turned
off.
2. Connect the OMNITV3A’s
built-in cable to the input jack
of the amplifier.
3. Connect the amplifier’s built-
in cable to the antenna input
on your TV.
4. Plug the amplifier’s power
cord into an electrical outlet.
Important: This power unit
should be plugged in so that it
stays vertical or lays flat.
5. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the OMNITV3A with the amplifier directly
to your TV:
EnglishEnglish
7
OMNITV3A
Installation (continued)
OMNITV3A Built-In
Coaxial Cable
TV
1. Make sure your TV is turned
off.
2. Connect the OMNITV3A’s built-
in coaxial cable to the antenna
input on your TV.
3. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the OMNITV3A without the amplifier
directly to your TV:
Note about digital channels
To display digital signals on your TV, you’ll need
to have the right equipment: either a TV that is
capable of decoding digital signals or a digital
converter box.
EnglishEnglish
8
OMNITV3A
Installation (continued)
Coaxial
Cable
Audio/Video
Cables
Converter Box
OMNITV3A Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
–or–
1. Make sure your converter box
is turned off.
2. Connect the OMNITV3A’s built-
in cable to the input jack of the
amplifier.
3. Connect the amplifier’s cable
to the antenna input on the
converter box.
4. Follow the directions in the
manual that came with your
converter box to connect it to
your TV.
5. Plug the amplifier’s power
cord into an electrical outlet.
Important: This power unit
should be plugged in so that it
stays vertical or lays flat.
6. Run your converter box’s setup
routine to scan for available
broadcast channels.
To connect the OMNITV3A with the amplifier to a
converter box or other tuning device:
EnglishEnglish
9
OMNITV3A
Installation (continued)
OMNITV3A Built-In
Coaxial Cable
Coaxial
Cable
Audio/Video
Cables
Converter Box
TV
–or–
1. Make sure your converter box
is turned off.
2. Connect the OMNITV3A’s
built-in cable to the antenna
input on the converter box.
3. Follow the directions in the
manual that came with your
converter box to connect it to
your TV.
4. Run your converter box’s
setup routine to scan for
available broadcast channels.
To connect the OMNITV3A without the amplifier to a
converter box:
Indice
Lingue:
Altri manuali TERK Technologies Antenna
TERK Technologies
TERK Technologies Multi-Satellite Dish Antenna 1DIRECTV Manuale utente
TERK Technologies
TERK Technologies SIR6 Manuale utente
TERK Technologies
TERK Technologies MTVGLS Manuale utente
TERK Technologies
TERK Technologies FM+ Manuale utente
TERK Technologies
TERK Technologies TERK XM4 MM Manuale utente
TERK Technologies
TERK Technologies XM5 Manuale utente
TERK Technologies
TERK Technologies SIR3 Manuale utente
TERK Technologies
TERK Technologies Trinity Xtend Manuale utente
TERK Technologies
TERK Technologies FDTV1a Manuale utente
TERK Technologies
TERK Technologies DTOC Manuale utente
TERK Technologies
TERK Technologies FM-50 Manuale utente
TERK Technologies
TERK Technologies SIR6 Manuale utente
TERK Technologies
TERK Technologies TV44 Manuale utente
TERK Technologies
TERK Technologies AM/FM Tower Powered Indoor Antenna Manuale utente
TERK Technologies
TERK Technologies Trinity Manuale utente
TERK Technologies
TERK Technologies RMTHINTV1A Manuale utente
TERK Technologies
TERK Technologies FM EDGE Manuale utente
TERK Technologies
TERK Technologies Trinity Xtend Manuale utente
TERK Technologies
TERK Technologies TV5 Manuale utente
TERK Technologies
TERK Technologies XM5 Manuale utente
Manuali Antenna popolari di altre marche
Alfa Network
Alfa Network APA-L01 Manuale utente
Naval
Naval PR-422CA Manuale utente
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Manuale utente
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Manuale utente
HP
HP J8999A Manuale utente
MobilSat
MobilSat MSP-S Manuale utente
