SX
57
÷ 65
470
1140
500
90960
132 ÷ 140 470
G1/2"
G1/2"
Installaon guide Alex 1140x500mm - SX
Please read the instrucons in full before starng to fit your radiator.
• Please check that all parts listed are present before starng installa-
on.
•Valves are not provided, please make sure that you have them
before you start. This product requires standard 1/2" radiator valves.
• Before drilling holes for the brackets please check that there are no
hidden wires or pipes.
• The plugs supplied are for hard walls masonry only. Please make
sure you are using the correct plug for your wall.
• Terma radiators are designed for closed heang systems.
• The radiator should be fied at least 100 mm from the floor to
maximise heat efficiency.
• Nong the distances between bracket centres, mark out the
posion of the brackets on the wall.
• Drill holes to approximately 80 mm depth using a 10 mm drill bit
and insert rawl plugs (1). Using connecng screw with a washer (2)
aach mounng bracket-1 (3).
• Using bracket to collector fixing screw (5) aach mounng
bracket-2 (6) to radiator.
• Guide all mounng brackets-2 (6) into mounng brackets-1 (3) and
fix with connecng screws (4)
• Connect the water flow using appropriate 1/2" BSP valves. Follow
valves manufacture guidelines for correct installaion.
• Fill the radiator and purge any trapped air via the bleed valve at the
top of the radiator.
• Wipe your radiator down using a clean damp cloth.
Never use scourers or abrasives.
For all installaon and warranty enquiries please
contact Crimson Bear Customer Support on
01535 636256
Refers to water and dual fuel version
22
30
30
Fixing kit content
rawl plug
wall fixing
screw +
washer
mounng
bracket-1
bracket
connecng
screw
bracket to
collector
fixing screw
mounng
bracket-2
air vent
allen key
(1)
(2)
(3)
(4)
(5)
(6)
