Tesla TSL-CAM-SOL5W Manuale utente
1
EN
SK
DE
PL
HU
SL
CZ
Tesla Solar Panel 5W
USER MANUAL
2
IN THE BOX
• Solar Panel
• Universal Joint
• Circular Socket Nut
• Locking Screw Cap
• Base
• Screws
• Wall Anchors
• Quick Start Guide
Solar Panel Universal Joint Socket nut
Screws Wall Anchors
Locking
Screw Cap
Base
3
INSTALLATION
Place Solar Panel in an area with consistent sunlight throughout the year. It only
needs a few hours of direct sunlight each day to keep your camera powered.
The amount of energy that the solar panel produces is affected by weather condi-
tions, seasonal changes, geographic location, etc.
Fix the base to your mounting location using the included screws. If the installa-
tion surface is soft or unstable, first use a 6.0 drill bit to drill a hole in the wall, then
insert the anchor nail into the hole, and fix the base with screws.
Wall Anchors
Base
Wall
Screws
4
First, install the locking screw cap into the universal joint and then screw the
circular socket nut into the universal joint.
Screw the universal joint into the back of the solar panel. Tighten it firmly with
the attached nut.
Locking Screw Cap
Universal Joint
Solar Panel
Front
Back
Socket nut
5
Screw the locking screw cap into the base. Make sure that the universal joint is
angled upward.
When adjusting the solar panel left or right, loosen the locking screw cap, turn
the sleeve rod, and tighten the locking screw cap when the panel is in position.
Base
Locking Screw Cap
Locking Screw Cap
6
Solar panel’s angle can be adjusted up and down up to 90°.
Tip: After the installation is complete, please check that all locking mechanisms are
tightly secured.
Locking Screw Cap
Sleeve Rod
7
HOW TO POSITION YOUR SOLAR PANEL
1. Find the area that gets the most direct sunlight throughout the day.
2. Angle the solar panel upward 30°.
3. Point it south if in the northern hemisphere and north if in the southern
hemisphere.
IMPORTANT
1. Wipe the face of the solar panel with a soft, damp cloth regularly to clear
any dust or debris.
2. Be sure to update the firmware version of the camera to the latest version.
Completed Installation
8
SPECIFICATION
Model TSL-CAM-SOL5W
Maxium Power(Pmax) 5W
Tolerance ±5%
Maxium Power Voltage(Vmp) 6V
Maximum Power Current(Imp) 0.83A
Working Temperature -20 °C to 50 °C
Cable Length 3m
Dimensions 174 × 163 × 12.5 mm
Net Weight 288g
9
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of
in accordance with the regulations for disposal of electrical and electronic equipment (Directive
2012/19/EU on waste electrical and electronic equipment). Disposal together with regular
municipal waste is prohibited. Dispose of all electrical and electronic products in accordance
with all local and European regulations at the designated collection points which hold the appro-
priate authorisation and certification in line with the local and legislative regulations. Correct
disposal and recycling help to minimise impacts on the environment and human health. Further
information regarding disposal can be obtained from the vendor, authorised service centre or
local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Tesla Global Limited declares that the radio equipment type TSL-CAM-SOL5W is
in compliance with 2014/53/EU directives. The full text of the EU declaration of conformity is
available at the following internet address: tsl.sh/doc
Connectivity: USB-C
Manufacturer
Tesla Global Limited
Far East Consortium Building,
121 Des Voeux Road Central
Hong Kong
www.teslasmart.com
10
Indice
Lingue:
Altri manuali Tesla Pannello solare
