Tesla WF61063MGR Manuale utente

Product images are for illustrative purposes only and may differ from the actual product.

WASHING

MACHINE

WF61063MGR

User Manual

GRENG

ENG

SAFETY INSTRUCTIONS

For your safety,the information in this manual must be followed to minimize the risk of ﬁre or explosion,

electric shock, or to prevent property damage, personal injury or loss of life.

Explanation of the symbols:

WARNING!

This combination of symbol and signal word indicates a potentially dangerous situation which may result in

death or serious injuries unless it’s avoided.

CAUTION!

This combination of symbol and signal word indicates a potentially dangerous situation which may result in

slight or minor injuries or damage to property and the environment.

NOTE

This combination of symbol and signal word indicates a potentially dangerous situation which may result in

slight or minor injuries.

WARNING!

The electric shock!

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualiﬁed persons in order to avoid a hazard.

• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be

reused.

• Before any maintenance the device, unplug the appliance from the mains.

• Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in

pascals. The min. inlet water pressure, in pascals.

• To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and

make sure that your socket is properly and reliably earthed.

• Make sure that the water and electrical devices must be connected by a qualiﬁed technician in accordance

with the manufacturer’s instructions and local safety regulations.

Risk to children!

• EN countries: the appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3years should be supervised to ensure that they do not play with appliance.

• Animals and children may climb into the machine. Check the machine before every operation.

• Kids should be supervised that they do not play with the appliance.

• Glass door may be very hot during the operation. Keep kids and pets far away from the machine during

the operation very wet rooms as well as in the rooms with explosive or caustic gas.

• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may

result.

• Plug must be accessible after installation.

Risk of explosion!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible

or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.)

This may result in ﬁre or explosion.

• Before hand thoroughly rinse items of washing by hand.

ENG

CAUTION!

Installing the product!

• This washing machine is for indoor use only.

• It isn’t intended to be built-in using.

• The openings must not be obstructed by a carpet.

• Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with

explosive or caustic gases.

• The washing machine with single inlet valve only can be connected to the cold water supply. The product

with double inlet valves should be correctly connected to the hot water and cold water supply.

• Plug must be accessible after installation.

• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may

result.

Risk of damaging appliance!

• Your product is only for home use and is only designed for the textiles suitable for machine washing.

• Do not climb up and sit on top cover of the machine.

• Do not lean against machine door.

• Cautions during Handling Machine:

1. Transport bolts shall be reinstalled to the machine by a specialized person.

2. The accumulated water shall be drained out of the machine.

3. Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine

door can not be used as the handle during the conveyance.

4. This appliance is heavy. Transport with care.

• Please do not close the door with excessive forces. If it is found difﬁcult to close the door, please check if

the clothes are put in or distributed well.

• It is forbidden to wash carpets.

Operating the appliance!

• Before washing the clothes at ﬁrst time, the product shall be operated in one round of the whole

procedures without the clothes inside.

• Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as

detergents. Please only select the detergents suitable for machine washing, especially for drum.

• Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc.

may cause serious damages to this machine.

• Please check whether the water inside the drum has been drained before opening its door.Please do not

open the door if there is any water visible.

• Be careful of burning when the product drains hot washing water.

• Never reﬁll the water by hand during washing.

• After the program is completed, please wait for two minutes to open the door.

Packaging/Old appliance

This marking indicates that this product should not be disposed with other household wastes throughout the

EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle it

responsibly to promote the sustainable reuse of material resources.To return your used device, please use the

collection systems or contact the retailer where the product was purchased. They return and can take this

product for environmental safe recycling.

ENG

INSTALLATION

Product Description

Accessories

Top cover

Water supply hose

Detergent dispenser

Door

Control panel

Power supply cord

Drain hose

Service ﬁlter

Drum

NOTE

• The product line chart is for reference only, please refer to real product as standard.

Transport hole plug Supply hose

cold water

Supply hose hot

water (optional)

Drain hose support

(optional)

Owner’s manual

Installation area

WARNING!

• Stability is important to prevent the product from wandering!

• Make sure that the product should not stand on the power cord. w

W>20mm

ENG

Before installing the machine, the location characterized as follows shall be

selected:

1. Rigid, dry, and level surface

2. Avoid direct sunlight

3. Sufﬁcient ventilation

4. Room temperature is above 0 °C

5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine

WARNING!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

• There is a risk of suffocation! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed

with the bottom one together. If not, lay the unit down with side surface, then remove the small foam

from the unit bottom manually.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

Remove transport bolts

WARNING!

• You must remove the transport bolts from the backside before using the product.

• You’ll need the transport bolts again if you move the product , so make sure you keep them in a safe place.

Please take the following steps to remove the bolts:

1. Loosen 4 bolts with spanner and then remove them.

2. Stop the holes with transport hole plugs.

3. Keep the transport bolts properly for future use.

Levelling the washing machine

WARNING!

• The lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions

tighten the nuts.

2. Loosen the lock nut turn the feet until it closely contacts with the ﬂoor.

3. Adjust the legs and lock them with a spanner, make sure the machine is steady.

1234

Raise Lower

Foot

Lock nut

ENG

Min.60cm

100cm

Max.

Connect Water Supply Hose

WARNING!

• To prevent leakage or water damage, follow the instructions in this chapter!

• Do not kink, crush, modify or sever water inlet hose.

• For the model equips hot valve,connect it to hot water tap with hot water supply hose. Energy

consumption will decrease automatically for some program.

Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.

1. Connection between ordinary tap and inlet hose.

2. Connection between screw tap and inlet hose.

Connect the other end of inlet pipe to the inlet

valve at the backside of product and fasten the

pipe tightly clockwise.

Drain Hose

WARNING!

• Do not kink or protract the drain hose.

• Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1234

Slide bushing

Clamp nut

Loosen clamp nut and

four bolts

Tap with threads and inlet hose Special tap for washing machine

1. Put the hose into the water drain 2. Connect it to a drain pipe.

Press slide bushing insert inlet

hose into connecting base

Tighten clamp nut Tighten clamp nut

Water Inlet valve

Water drain

Water supply hose

ENG

WARNING!

• When installing drain hose, ﬁx it properly with a rope.

• If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.

CAUTION!

• Before washing, please make sure it’s installed properly.

• Before washing at ﬁrst time, the washing machine shall be operated in one round of the whole procedures

without clothes in as follows.

1. Before Washing

Hose

Retainer

NOTE

• If the machine has drain hose support, please install it like the following.

NOTE

• Detergent need to be added in “case I“ after selecting pre-washing for machines with this function.

NOTE

• If default is selected, step 2 can be skipped.

• The function button line chart is for reference only, please refer to real product as standard.

2. Washing

Max.100c

Min.60cm

Mi n . 6 0cm

Ma x . 1 00cm

Drain

Bind

OPERATIONS

Quick Start

Plug in

Select Program Select function or default Start up

Open tap Load Close door Add detergent

Main

wash

Softener

Prewash

ENG

3. After Washing

The door lock and the [Start / Pause ] lights ﬂash with the buzzer beeping or two small points ﬂash on the

digital screen.

• The working condition of the washer should be (0-40) °C.If used under 0 °C,the inlet valve and draining

system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be

transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen

before use.

• Please check the labels and the explanation of using detergent before wash. Use non-foaming or

less-foaming detergent suitable for machine washing properly.

Prewash detergent

Main wash detergent

Softener

Before Each Washing

Detergent Dispenser

Check the label

Put small clothes into the pillow slip

Pull out the dispenser

Take out the items out of the pockets

Turn easy-pilling and long-pile fabric

inside out

Knot the long strips, zip or button

Separate clothes with different textures

WARNING!

• When washing a single clothes, it may easily cause great eccentricity and give alarm due to great

unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that

draining can be done smoothly.

• Don’t wash clothes that have been in touch with kerosene, gasoline, alcohol and other ﬂammable materials.

CAUTION!

• Detergent only need to be added in “case I“ after selecting pre-washing for machines with this function.

ENG

Control Panel

Off

Product is switched off.

Start/Pause

Press the button to start or pause the

washing cycle.

Option

This allows you to select an additional

function and will light when selected

Programs

Available according to the laundry type.

Means must Means optional

NOTE

• As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it

is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and

overﬂowing while ﬁlling water.

• Please choose suitable type of detergent for the various washing temperature to get the best washing

performance with less water and energy consumption.

Program

Cotton 30 °C

Cotton 40 °C

Cotton 60 °C

Cotton 90 °C

Synthetic

Synthetic 40 °C

Drum Clean

Cotton Intensive 40 °C

Cotton Intensive 60 °C

Quick Wash 45'

Quick Wash 30'

Quick Wash 15'

Program

Spin Only

Drain Only

Rinse&Spin

Delicate 30 °C

Delicate

Mix 60 °C

Mix 40 °C

Mix

ECO 40-60

Cold Wash

Cold Wash 20°C

The chart is for reference only, please refer to real product as standard.

NOTE

Indice

Lingue:

Manuali Rondella popolari di altre marche

Tricity Bendix

Tricity Bendix AW 1000 W Guida del prodotto

Panasonic

Panasonic NA-F60L5WRB Manuale utente

GE WSLP1500 Manuale

Electrolux

Electrolux EWF1284EDW Manuale utente

Bosch

Bosch WAN2829BSN Manuale utente

LG TV2516DV3B Manuale utente

LG TH2517DSAV Manuale utente

VESTEL

VESTEL CMH-XL 7510 TE Manuale utente

AEG

AEG 74335 Manuale operativo

Johnson

Johnson JWF721A Manuale utente

Beko

Beko WTE7604XLW0 Manuale utente

Danby

Danby DTT100A1WDB Istruzioni per il montaggio

Amica

Amica WA 14 Ex Manuale utente

Daewoo

Daewoo DWD-F1222 Manuale utente

Bosch

Bosch WAS28461AU Manuale utente

Miele

Miele PW 6080 Vario Manuale utente

Finlux

Finlux FLX108CF220 Manuale utente

Whirlpool

Whirlpool 3LBR5132AN0 Manuale utente