TESTO 870 Manuale utente

How to Operate the

Testo 870 thermal imager

2/27www.testo.com,

1. Technical data testo 870-1 & 870-2

2. Technical overview (Fixed focus)

3. Interface/internal memory

4. Inserting the battery

5. Operation of the testo 870 (Keys)

6. Assigning speed dial key

7. Menu

7.1 Image gallery

7.2 Measurement functions

(One-point, Hot/Cold-Spot, Measurement range)

7.3 Image type (Real image camera)

7.4 Scale setting

7.5 Emissivity & RTC setting

7.6 Selection of the colour palette

7.7 Configuration

7.7.1 Testo SuperResolution

7.7.2 Fullscreen mode

Content

7.7.3 Save JPEG

7.7.4 Power-save options

7.7.5 Language configuration

7.7.6 Configuration of the temperature unit

7.7.7 Setting time/ date

7.7.8 Reset image counter

7.7.9 Format

7.7.10 Factory settings

8. Transmitting images to the PC

3/27www.testo.com,

Technical overview

Element Function

1 Display Shows infrared and real images (only testo 870-2),

menu and functions

2Interface terminal Contains Micro-USB-Interface for power supply and

connection to the computer

3-Key Power/ESC - To turn camera on/ out

- To abort actions in the menu

4-Key OK

-Joystick - Open menu, select functions and confirm setting

- navigate in the menu, mark functions, select

colour palette

5Speed dial key Opens assigned function, the symbol of the selected

function can be seen on the lower right side of the

display

6 Lens infrared camera (Fixed

focus), Protective cap Takes infrared images; protects the lens

7Digital camera (only testo 870-2) Captures visual image

8 Trigger Saves the indicated thermal image

9Battery compartment Contains the battery

Fixed focus: Optimized Focus-free optics guarantee a perfect image every time.

4/27www.testo.com,

Interface / internal memory

Internal Memory: The testo 870 possesses an internal

memory. This memory has a capacity of 1.6 GB and allows

to save >2.000 thermal images. Images can be accessed

via a USB connection.

Mini USB-Interface: Another new aspect, of the testo 870, is that the battery is charged via the

USB cable. The imager can be charged with any USB connection. The camera has to be

switched off, if charging it via PC.

Charging time via PC: ca. 8 Std.

Charging time via power supply unit: ca. 5 Std.

The battery can also be charged with the aid of the table top rapid charging station.

5/27www.testo.com,

Inserting the battery

1. Remove the battery cover by sliding it down

2. Put the battery in the opening

3. Push the battery up until it clicks into place – „click“

4. Put the battery cover on and push it up

1. 2. 3. 4.

6/27www.testo.com,

1 button Joystick

•Depress the 1 button Joystick

and open the main menu

•All menus and commands can

be accessed by utilizing this

joystick

•Depress to make selections

Operation of keys

Speed Key

•Custom select you most

used function and

program key for this

menu.

ESC/Power key

•the thermal imager

can be switched on

and off. Turning it off,

the key has to be held

for approximately 3

seconds.

•ESC operation this

enables the go back

one menu level

7/27www.testo.com,

Assigning speed dial key

Pushing the 1 button Joystick to the

right…

Below the scale, a symbol indicates the

reserved function of the speed key

… select desired function and

confirm with OK (Depress)

8/27www.testo.com,

Image gallery – Display of saved images

Open thermal images from the image gallery. Open images can be analyzed with any

imager function (such as measurement functions, scale, etc.), as in the live mode.

The file name of the open thermal

image is shown in the top left of the

display.

9/27www.testo.com,

Measurement functions

The “Single point measurement“

can be activated in the menu

“Measurement“

“Hot-Cold-Spot Recognition“

can be turned on at any time.

The testo 870 has only one wide measurement range of -4 to 536 °F to -20

…+280 °C. Setting the correct range is unnecessary.

10/27www.testo.com,

Image type (only testo 870-2)

In order to display an image you can choose between a thermal image and a visual

image.

During an image recording, the thermal image and

the real image are automatically saved together.

Confirm with click

Altri manuali per 870

2

Indice

Manuali Telecamera termica popolari di altre marche

Hikmicro

Hikmicro B20 Manuale utente

FLIR

FLIR E-EST Series Manuale utente

FLIR

FLIR M-Series Manuale utente

BST

BST BT-72 Manuale utente

FLIR

FLIR G300 pt Series Manuale utente

CBC

CBC EN7-S02T Manuale utente

Satir

Satir YRH600 Manuale utente

TECPEL

TECPEL TIG-320 Manuale utente

SKF

SKF TKTI 21 Manuale utente

InfiRay

InfiRay AT300 Series Manuale utente

InfiRay

InfiRay AT Series Manuale utente

FLIR

FLIR X6530sc Series Manuale utente

Videotec

Videotec MAXIMUS MVXT Manuale utente

Guide Sensmart

Guide Sensmart D384M Manuale utente

NBN

NBN FLIR A6 Series Manuale utente

WORKSWELL

WORKSWELL SAFETIS Manuale utente

Major tech

Major tech MTi11 Manuale utente

COHU

COHU 5935-1000/T100 Manuale utente