Texecom Premier IXP-W Manuale utente

Installation Manual

Premier IXP-W

INS538

Premier IXP-W Installation Manual

INS538 2

1. Contents

1. Contents........................................................................................................... 2

2. Premier IXP-W Interface ................................................................................ 3

Premier 8XP-W & 32XP-W Firmware............................................................... 3

3. Quick Start Guide............................................................................................ 4

4. System Overview ............................................................................................ 5

Mounting the IXP-W.......................................................................................... 7

Wiring ................................................................................................................ 8

5. Programming................................................................................................... 9

Option Switch Settings................................................................................ 9

Configuring Radio devices .......................................................................... 9

Adding Devices to the Receiver ...................................................................... 9

Ricochet Monitor™ ...................................................................................... 9

Engineers Keypad ....................................................................................... 9

Premier 8XP-W & 32XP-W Learn Switch...................................................... 9

6. Specifications................................................................................................ 10

Electrical ......................................................................................................... 10

Standards........................................................................................................ 11

Warranty.......................................................................................................... 11

Premier IXP-W Installation Manual

3INS538

2. Premier IXP-W Interface

The Premier IXP-W Interface is designed to be used in conjunction with a Premier 8XP-W/32XP-W

Wireless Mesh Networking Expander.

The IXP-W allows you to use Ricochet™ enabled sensors and devices on any control panel.

For the purposes of illustration the Texecom Veritas is shown in this manual as an example for

connection.

This manual should be read along with INS467 for the Premier 8XP-W & 32XP-W, and with any

device specific installation manuals.

Premier 8XP-W & 32XP-W Firmware

The Premier IXP-W is only compatible with firmware version 1.3.4 and later of the Premier 8XP-W &

32XP-W.

To check the firmware version of your receiver you can use either Ricochet Monitor software, or a

Premier Engineers keypad. The firmware version is also printed on a small sticker located on the

main processor on the PCB.

Please see INS467 Installation Instructions Premier 8XP-W/32XP-W or the Ricochet Monitor Help

files.

Premier IXP-W Installation Manual

INS538 4

Connect IXP-W to 8XP-W or

32XP-W 12V 0V T & R

Connect 12V & 0V to control

panel Aux supply

Firmware for the Premier

32XP-W & 8XP-W must be

V1.3.4 or later for the Premier

IXP-W to function

3. Quick Start Guide

Set Option switch 2 Premier

8XP-W/32XP-W to ON

Make Control panel

connections for Zones, Global

Tamper, Global Poll Error &

Global Battery

Learn Devices to the Receiver

with Engineers Keypad,

Ricochet Monitor or onboard

LED’s

See INS467 for more detail

Place Devices in desired

location, use LED to indicate

Signal Security

See INS467 for more detail

Wait 15 Minutes for Mesh

Network to establish

Walk Test System

See INS467

Change Device Attributes

according to application

See INS467

Premier IXP-W Installation Manual

5INS538

4. System Overview

1: Address Switches

Not Used.

2: Option Switches

Only Switch 4 is used to enable/disable Walktest Mode, this is the same as on the receiver, please

see INS467 for more information.

3: Global Poll Error

Connect to a spare Zone on the control panel to signal a polling error from a device.

SYSTEM STATUS INPUTS

1 654

2 7

GPE GT GLB

+12V 0V T R

Z8 Z7 Z6 Z5

Z3 Z2 Z1

Sw1 Sw2

1 2 3 4 5 6

Premier IXP-W Installation Manual

INS538 6

4: Global Tamper

Connect to Global Tamper, or a spare circuit on the control panel to indicate Tamper on either a

device, the IXP-W or the Receiver.

5: Global Low Battery

Connect to a spare zone on the control panel to signal low battery from devices on the system. If

not required link out.

6: Flash Programming Port

For future use.

7: Heartbeat LED

This LED beats once per second.

8: Transmit LED

Pulses when data is being transmitted.

9: Receive LED

Pulses when data is being received.

10: Network Connection

Network connections for connecting the IXP to the receiver.

11: Cover Tamper

Tamper Switch connection.

12: Tamper Disable

Link out to disable cover tamper.

13: Zone Connections

For connecting the IXP-W to the control panel.

14: System Status Connections

For Future Use

Premier IXP-W Installation Manual

7INS538

Mounting the IXP-W

Remove the Screw cover by locating the two small indents on the upper and lower edge with a small

screwdriver, excessive force is not required.

Remove the retaining screw

2 4

3 1

2 4

Premier IXP-W Installation Manual

INS538 8

Wiring

It is strongly recommended that the system is completely powered down (mains and battery) before

wiring the expander and interface card. Connect the expander to the interface using 4-core cable,

and make all other connections as follows:

Expander

Interface

Panel Description

+ + Aux + +12V Supply

- - Aux - 0V Supply

T T N/A Transmit Data

R R N/A Receive Data

Z1-Z8 Panel Zones Radio Devices

N/C Input

GPE Panel Zone or Separate*

Aux Input

Global Poll Error

N/C Input

GLB Panel Zone or Separate*

Aux Input

Global Low Battery

N/C Input

GT Global Tamper or Separate*

Aux Input

Global Tamper for devices,

Expander & Interface

To ensure correct operation, all four terminals on the interface must be connected to the

corresponding terminals on the expander.

If Global Poll or Global Low battery are not required, link out the connections on the IXP-W.

*Do not wire all of these to the same input!

Standard 7/0.2 alarm cable can be used for most installations. However, under certain

conditions it may be necessary to use screened cable.

Premier IXP-W Installation Manual

9INS538

5. Programming

Option Switch Settings

All switches on the IXP-W should be turned OFF.

Option switch 2 on the Premier 8XP-W/32XP-W should be turned ON.

Configuring Radio devices

Up to 8 wireless devices of any combination can be learnt to the system. When learning devices the

receiver needs to be in “commission mode”, please see INS467 for details.

Adding Devices to the Receiver

Devices can be learned onto the system in three ways. It is highly recommended that Ricochet

Monitor ™ is used to add/delete devices and to monitor system status and the Signal Security™of

the mesh network.

Ricochet Monitor™

To use Ricochet Monitor follow the instructions detailed in the Information files of the programme for

Adding & Deleting Devices.

Engineers Keypad

To use an Engineers Keypad follow the instructions in INS467 the Installation Manual for the Premier

8XP-W & 32XP-W.

Premier 8XP-W & 32XP-W Learn Switch

It is possible to learn devices directly to the receiver using the learn switch on the receiver, to use

this option please follow the instructions in INS467 the Installation Manual for the Premier 8XP-W &

32XP-W.

Premier IXP-W Installation Manual

INS538 10

6. Specifications

Electrical

Operating Voltage 10 - 13.7VDC

Current Consumption <20mA

Network 4-wire standard 7/0.2 alarm cable up to 250m.

Inputs 1 - 8 N/C

Weight Boxed 176g unboxed 151g

Dimensions L147mm x W92mm x H32mm

Operating Temperature -10°C (+14°F) to +50°C (+122°F)

Storage Temperature -20°C (-4°F) to +60°C (+140°F)

Maximum Humidity 95% non-condensing

EMC Environment

Residential, Commercial, Light Industrial

or Industrial

Indice

Altri manuali Texecom Hardware di rete

Texecom

Texecom SmartCom Manuale utente

Texecom

Texecom SmartCom 4G Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente