6
ENGLISH
Change orientation
1. Switching from horizontal to vertical mode
Keep the phone facing yourself and rotate the handle counterclockwise more than 70 degrees, this will
force the gimbal to enter vertical mode (phone camera should be upward).
2. Switch mount direction
Step 1: Loosen the clamp screw and rotate the clamp to vertical position.
Step 2: Place your phone in the clamp.
Step 3. Tighten the clamp and proceed.
Safety information
The gimbal should only be used in temperatures between 0 - 40° C. Any use of the device in temperatures
below or above mentioned range can damage the device. The gimbal is not waterproof or water resistant,
keep it away from liquids of any kinds. Keep the gimbal away from dust and sand.
