Texlabel SPB Manuale utente
User Guide
V. 20.0316
SPB
2
Summary
OVERVIEW............................................................................................................................................3
INSTALLING PRINTER............................................................................................................................5
INSTALLING DRIVER FOR WINDOWS USERS ........................................................................................5
INSTALLING CUTTER / STACKER (Optional)..........................................................................................6
LOADING RIBBONS AND FOILS.............................................................................................................8
LOADING LABELS ON CONTINUOUS MODULE...................................................................................12
HOW TO USE Cablabel S3 Lite SOFTWARE ........................................................................................13
MAINTENANCE...................................................................................................................................21
CLEAR ERROR MESSAGES...................................................................................................................22
PARAMETERS FOR WHITE AND COLORED STICKERS .........................................................................24
PARAMETERS FOR TRANSPARENT STICKERS .....................................................................................26
PARAMETERS FOR COMPOSITION LABELS.........................................................................................28
PRINCIPAL REQUIREMENTS FOR INTERNATIONAL CARE LABELS ......................................................33
3
OVERVIEW
Please keep the original packaging in case the printer must be returned.
Box Content:
SPA Printer
DVD including software and printer driver for Windows
One empty cylinder core for rewinding the foil
USB Cable
AC Adapter
Power Adapter
Printer View:
1. Cover
2. Ribbon regulator tabs
3. Ribbon supply wheel
4. Foil supply wheel
5. Foil rewind wheel
6. Print mechanism
7. Touchscreen Display
4
8. Foil guide roll
9. Pressure wheel
10. Extractable allen key for regulating
11. printhead lever secure
12. Advancement wheel
13. Ribbon guide roll
14. Photoelectric label barrier
15. Ribbon lateral guide regulator
16. Pressure wheel pin lock
17. Anti-static brush
18. ON/OFF Switch
19. AC Power Port
20. Slot for SD Memory Card
21. USB Port
22. Usb 2.0 port pc connection
23. Ethernet 10/100 base-t
24. Serial interface RS-232C
5
INSTALLING PRINTER
1. Place printer onto flat and regular surface
2. Make sure ON/OFF switch is set to OFF
3. Install the cutter / stacker (See page 6)
4. Connect printer to the computer with USB cable or Ethernet cable
5. Connect AC cable to the AC Power port on the back of the printer, and then connect the Power
Adapter to a grounded socket
6. Install drivers (link below)
7. The printer will run a test upon power up. If connected properly, the display should show the
writing “Ready”.
INSTALLING DRIVER FOR WINDOWS USERS
1. Option 1.
a. Connect to the following link for instructions on how to download the Windows driver for
the printer
www.texlabel.eu/wp/download-it
2. Option 2.
a. Turn on printer and wait for the writing “Ready” to appear on the display
b. Run DVD as an administrator and follow the printer setup wizard
Installing Software
1. Insert the DVD in the computer.
2. Choose "Software" on the Welcome screen.
3. Press the icon "install software" to start the installation.
6
INSTALLING CUTTER / STACKER (Optional)
1) Cutter inert port
2) Cutter anchor fastening point
3) Cutter data connector
4) Cutter inert port
WARNING!!! RISK OF BEING CUT
PROCEED WITH THE PROCESS WITH THE AC CORD DISCONNECTED FROM THE PRINTER
Place the cutter onto the frontal part of the printer, making sure to align the cutter outputs with the cutter
inert ports. By doing so, also aligns the cutter data connector. After this task is complete, fasten the screw
of the cutter onto the cutter anchor fastening point.
LATERAL GUARDS FOR CUTTER AND STACKER PLATE (OPTIONAL)
1) Fastening plate bolts
2) Lateral guards screws
3) Stacker plate
4) Lateral guards
Place the stacker plate onto the cutter stacker track, inserting the fastening plate bolts into the assigned
holes. Fasten and secure the plate.
7
WARNING!!! RISK OF BEING CUT
PROCEED WITH THE PROCESS WITH THE AC CORD DISCONNECTED FROM THE PRINTER
Install the lateral guards as shown below, making sure to align the fastening points indicated by the arrows.
The lateral guards are both different from one another, one is for the left side and one is for the right side.
Be careful in positioning the guards.
In case of difficulty with these processes, contact TEXLABEL technical support.
Once the lateral guards and stacker is installed, the cutter will look as so:
8
REGULATE THE WIDTH OF THE STACKER
Adapting the width of the stacker, based on the ribbon width.
By loosening (using the allen key for regulating) the 4 screws indicated in the picture below, allows to slide
the lateral guards of the stacker to increase or decrease the width needed. To lock the width at a
determined width, use the measurement ruler placed between the bolts as a guide.
9
LOADING RIBBONS AND FOILS
LOADING RIBBONS
Rotate the regulator tab ring (5) counter-clockwise, so the arrow (6) is aligned with unlock symbol. In this
way loosening the regulator tab (4).
Remove the regulator tab (4) from the ribbon supply holder (3).
Insert the ribbon (2) onto the ribbon supply holder (3), so that the ribbon unwinds clockwise.
Insert the regulator tab (4) onto the ribbon supply holder (3) and slide down until the two regulator tabs (1
and 4) keep the ribbon (2) in place.
Rotate the regulator tab ring (5) clockwise, so the arrow (6) is aligned with the lock symbol. By doing so, the
regulator tab will fasten onto the ribbon supply holder.
10
Make sure the printhead is raised and that the pressure wheel is raised.
Increase the lateral guides of the ribbon using the lateral guide regulator.
Pass the ribbon through the print mechanism as shown below.
Once the ribbon is installed and guided through the print mechanisms, proceed with regulating the lateral
guides of the ribbon.
To regulate the lateral guides of the ribbon, use the lateral guide regulator indicated by the red arrow. By
rotating the regulator clockwise, the lateral ribbon guides (yellow arrows) will close, and counter-clockwise
will open them.
The lateral guides need to be regulated based on the width of the ribbon being used.
If the guides are too tight, a “belly” will form on the ribbon that will cause a bad quality of print and will
probably jam the printer.
If the guides are too wide, the ribbon will move during the printing process.
Indice
Altri manuali Texlabel Etichettatrice
