The China Office T8100 Manuale tecnico
1
T8100 Tablet –Software Update process
Document version date: 27 May 2021
The purpose of this document to explain how on a T8100 tablet, the operating system can be
upgraded with a new version of the software or can be re-installed with an existing software
version in case the device was corrupted.
For this process to work, you need the T8100 tablet, a USB cable and a windows PC/laptop. You
also need to download both phoenixsuit upgrade tool and the software via the We transfer link
specified below.
Important note: This update process only works on windows computers; it cannot be done on
Apple computers.
Process:
We transfer link: Software & installation guide
Step 1: Download and install the phoenixsuit upgrade tool via the specified link. Choose the
“PhoenixSuit_EN.msi” file for the installation of the phoenixsuit upgrade tool. Then follow the
installation steps.
2
3
4
5
6
Step 2: Download the software via the specified link.
Open the folder and copy and paste the software file (See below) to your desktop to find it more
easily later on.
7
Step 3: Open the upgrade tool "phoenixsuit on your laptop and go to the “firmware” section (see
below).
Step 4: Click on“Image and select the software file you put on your desktop (see below). Do NOT
click "Upgrade".
Step 5: Turn off your tablet.
Step 6: Keep pressing the volume down button.
Important note: During steps 7 and 8, keep pressing the volume down button.
Step 7: Connect your tablet to your laptop with the tablet USB cable.. (Keep pressing the volume
down button).
Step 8: Keep pressing the volume down button and, at the same time, start to press the power
button several times continuously until the message specified below appears on your laptop screen.
Once this message has appeared, stop press the power button but keep pressing the volume down
button.
8
Step 9: Click “No” on the message.
Step 10: The progress bar will then appear on your screen. At that moment, you can release the
volume down button and wait for the upgrade to finish.
Step 11: When the upgrade will be finished, the message specified below will appear on your
screen. Then click “OK.
Step 12: Your tablet will automatically start up again.
9
T8100 Tablet - Software Update proces
Datum documentversie: 27 mei 2021
Het doel van dit document is uit te leggen hoe op een T8100 tablet het besturingssysteem kan
worden geüpgraded met een nieuwe versie van de software of opnieuw kan worden geïnstalleerd
met een bestaande softwareversie voor het geval het besturingssysteem beschadigd is geraakt.
Om dit proces te laten werken, heeft u de T8100 tablet, een USB kabel en een Windows PC/laptop
nodig. U moet ook de “phoenixsuit” upgrade tool en de software downloaden via de link hieronder.
Belangrijke opmerking: Dit updateproces werkt alleen op Windows-computers; het kan niet
worden uitgevoerd op Apple-computers.
Proces:
link naar : Software & installatiegids
Stap 1: Download en installeer de phoenixsuit upgrade tool via de aangegeven link. Kies het
"PhoenixSuit_EN.msi" bestand voor de installatie van de phoenixsuit upgrade tool. Volg dan de
installatie stappen.
10
Altri manuali per T8100
1
Indice
Lingue:
Altri manuali The China Office Tavoletta
