ThePondguy ClearSolution G2 Manuale utente

Important Information........................2

Package Contents.............................3

Technical Specs ...............................3

How it Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing Your ClearSolution™ G2 Filter ....... 5-6

Maintaining Your ClearSolution™ G2 Filter.... 7-10

Troubleshooting.............................11

Replacement Parts ........................12-13

Warranty Information........................16

Table of Contents:

For Model:

• ClearSolution™ G2 700

(Item #130060)

• ClearSolution™ G2 1250

(Item #130061)

ClearSolution™ G2

Pond Filtration System

Product Manual

IMPORTANT INFORMATION:

Please read these instructions thoroughly before use. Failure to follow instructions may

result in equipment damage or failure, losses, injury or death.

DANGER:

To avoid possible electric shock:

• If the power cord has been damaged, DO NOT operate, the ClearSolution™ G2 Filter should

be replaced.

• Prior to installation, inspect the quartz sleeve and UVC bulb to ensure there was no damage

during transportation.

• Close supervision is necessary when the unit is used by or near children.

WARNING:

To reduce the risk of electric shock:

• Connect only to a properly grounded receptacle, which is serviced by a Ground Fault Circuit

Interrupter and never remove the ground pin from the plug.

• Provide a “drip loop” for the power cord. This is a loop in the cord below the level of the

receptacle or plug that prevents water from traveling along the cord in the direction of

the receptacle.

• ALWAYS unplug the ClearSolution™ G2 Filter from power source when it is not in use, and

before installing, removing or servicing the ClearSolution™ G2 Filter components.

• If an extension cord is necessary, a cord with a proper rating should be used. A cord may

overheat if the cord is rated for less amperes or watts than the unit rating.

• DO NOT immerse the ClearSolution™ G2 Filter plug in water or attempt to use a wet plug.

• The ClearSolution™ G2 Filter is NOT suitable for use in swimming pools, swimming ponds, or

other situations where bodily contact is made with the water.

CAUTION:

To reduce the risk of equipment damage or failure:

• ALWAYS keep the ClearSolution™ G2 Filter completely submerged during operation for

proper cooling.

• DO NOT place ClearSolution™ G2 Filter near ammable or other dangerous materials or objects.

• DO NOT use the ClearSolution™ G2 Filter with uids other than water.

• ALWAYS unplug the unit if there is no water running through it to prevent over heating.

• DO NOT operate during freezing conditions. Drain the ClearSolution™ G2 Filter and store in a

protected location.

• DO NOT operate the ClearSolution™ G2 Filter with a pump larger than the pump indicated

by the unit specications. Operating with a pump larger than recommended can reduce the

UVC’s eectiveness or cause damage to the UVC and lter and will NOT be covered under

warranty.

IMPORTANT:

The Pond Guy® is not responsible for equipment damage or failure, losses, injury or death

resulting from failure to follow safety precautions, misuse or abuse of equipment.

thepondguy.com | 866-POND-HELP (766-3435)

Package Contents

CLEARSOLUTION™ G2 FILTER

ClearSolution™G2 Filter

AClearSolution ™Filter

BFountain Fitting Set

TECHNICALSPECS :

MODEL POWER UV

WATTAGE

BARB

FITTING

MAX FLOW

RATE

MAX POND

SIZE

ClearSolution™G2 700 120V / 60 Hz 7 Watts 1/2” 250 GPH 700 Gallons

ClearSolution™G2 1250 120V / 60 Hz 9 Watts 1/2”, 3/4” 580 GPH 1,250 Gallons

MODEL Max Head

Height

Operating

Depth DIMENSIONS POWER CORD

LENGTH

ClearSolution™G2 700 4’ 16”-21” 9.7”L X 7.2”W x 6.3”H 16’

ClearSolution™G2 1250 7.2’ 16”-21” 15”L x 11.4”W x 6.3”H 16’

NOTES:

Bell Pattern Fan Pattern

Classic Pattern

15425 Chets Way | Armada, MI 48005 3

HERE’S HOW IT WORKS:

First, the water is pulled through the ClearSolution™ G2 Filter System by an energy ecient

pump. The intake cover and media pads prevent large debris from entering and clogging

the ltration system. Then, Bio media and Bio Media Rocks act as biological ltration and

provide an abundant amount of surface area for benecial bacteria to grow. This benecial

bacteria helps to break down ammonia and organic matter as it passes through the system.

The nal step is to pass water through the powerful UV Clarier. This ensures the pond

water stays crystal clear all season. The ltered water can now be routed back to your pond

using the fountain with either the classic, bell or fan pattern, or by diverting water to a

small waterfall or spitter.

Powerful UV

Clears water

Bio-Media

Provide biological filtration

Decorative Aerating

Fountain Head

3 separate nozzles included

Dual Filter Media Pads

Remove suspended debris

Bio-Media Rocks

Remove ammonia &

other water impurities

thepondguy.com | 866-POND-HELP (766-3435)

INSTALLING YOUR CLEARSOLUTION™FILTER:

For Best Results

• Run the ClearSolution™ G2 Filter 24 hours a day.

• DO NOT operate during freezing conditions. Drain the ClearSolution™ G2 Filter

and store in a protected area.

Classic Pattern

Model 700: 23”W x 20”H

Model 1250: 32”W x 30”H

Model 700: 24”W x 20”H

Model 1250: 52”W x 40”H

Model 700: 10”W

Model 1250: 20”W

Fan Pattern Bell Pattern

Watch a video of the ClearSolution™ G2 Filter installation

online @ www.thepondguy.com/clearsolutionG2

Step 2

Connect Fountain Assembly to

the Filter

Screw the assembly onto the ClearSolution™ G2 Filter.

Step 1

Assemble Fountain

Components

Assemble the components in order:

ClearSolution™ G2 700: O-ring, Diverter

Valve, Nozzle Tube and Compression Ring,

Nozzle Mount and Nozzle Insert.

ClearSolution™ G2 1250: O-ring, Diverter

Valve, Nozzle Tube and Compression Ring,

Nozzle Mount and Nozzle Insert.

Model 700 Model 1250

15425 Chets Way | Armada, MI 48005 5

Step 3 (Optional)

Install Additional Water Feature

Using the diverter valve, a portion of the water ow

can be directed to an additional water feature if you

choose.

ClearSolution™ 700: Connect tubing directly to the

diverter valve to add a spitter or other decorative

feature or close the outlet using the cover cap.

ClearSolution™ 1250: Attach the threaded reducer

and the hose adaptor. Connect tubing to the hose

adaptor to add a spitter or other decorative feature or

turn the diverter valve to force all water to the fountain

nozzle.

Step 4

Place Filter in Pond

Place the lter on a at surface towards the middle of

your pond. The fountain head must remain above the

water’s surface.

Step 5

Plug in the Unit

Plug the power cord into a standard 120V GFCI outlet.

Step 6

Adjust the Water Flow

Adjust the spray height (left valve), or the water ow

to a waterfall or feature (right valve), by opening or

closing the diverter valves.

INSTALLING YOUR CLEARSOLUTION™FILTER:

Model 700

Model 1250

thepondguy.com | 866-POND-HELP (766-3435)

WARNING:

Before performing any maintenance, always unplug the ClearSolution™G2 Filter

from the power source.

Watch a video of the ClearSolution™ G2 Filter maintenance

online @ www.thepondguy.com/clearsolutionG2

Tools Required: • Soft, damp cloth

• #2 Phillips Screwdriver

• Replacement UV Bulb

• Replacement Filter Media Pads

• Replacement Quartz Sleeve if yours is cracked or damaged

Step 1

Unplug UV and Pump

Unplug the UV and pump, disconnect any plumbing

and remove the unit from the pond.

Step 2

Remove Fountain Assembly

Unscrew the diverter and fountain assembly from the

unit.

Step 3

Remove Intake Cover

Unlock and remove the intake cover to expose the

lter media.

MAINTAINING YOUR CLEARSOLUTION™FILTER:

15425 Chets Way | Armada, MI 48005 7

Step 4

Remove Media Pads

Remove and discard the old lter media pads.

Step 5

Remove UV and Pump

Remove the UV and pump assembly from the lter base.

Step 6

Clean Filter Base

Gently rinse any heavy debris from the lter base with

water.

Step 7

Remove UV Housing

Press and hold the clip on the UV and twist the UV

housing in the direction indicated to remove.

Step 8

Remove Compression Nut

Remove the screw in the compression nut using a #2

Phillips screwdriver and unscrew the compression nut

to remove the quartz sleeve.

MAINTAINING YOUR CLEARSOLUTION™FILTER:

thepondguy.com | 866-POND-HELP (766-3435)

Step 9

Replace UV Bulb

Replace the UV bulb by gently removing the bulb

from the socket and replacing with a new one. Avoid

touching the new bulb with your hands as the oils

from your skin cause damage to the bulb.

Step 10

Transfer Rubber Cap

Be sure to remove the rubber cap from the old bulb

and place it on the new bulb.

Step 11

Clean Quartz Sleeve

Clean the quartz sleeve using a soft damp cloth. Any

debris buildup will greatly reduce the eectiveness

of the UV Clarier. If your quartz sleeve is cracked or

damaged, it must be replaced. Note: Condensation

may form on the quartz sleeve. This cannot be avoided

and does not impair the function or safety of the unit.

Step 12

Reassemble UV

Once cleaned, reassemble the o-ring and quartz sleeve

and lock into place with the tension nut and screw.

Step 13

Connect UV Housing

Place the UV housing back on to the UV and twist to

lock into place.

Step 14

Test UV

Temporarily plug in the UV Clarier to test. The view

window on the UV housing will tell you if the UV bulb

is working.

15425 Chets Way | Armada, MI 48005 9

MAINTAINING YOUR CLEARSOLUTION™FILTER:

Step 15

Remove Impeller

Remove the pump cap to expose the impeller, then

pull gently to remove impeller.

Step 16

Reassemble

Wash all parts with clean water and check for any wear

or debris trapped inside the pump. Reassemble the

impeller and pump cap.

Step 17

Reassemble Filter

Place the pump and UV back into the lter housing.

Install lter media pads. Note: Media pads may be

rinsed throughout the season anytime water ow

is reduced. Avoid using chlorinated tap water or

detergents, which will strip the media of

benecial bacteria.

Step 18

Reinstall Filter

Reconnect the diverter and fountain assembly and any

additional water features. Place the lter unit back into

the pond. Plug in the pump and UV, and then adjust

the fountain spray and diverter ow.

Winter Storage

The ClearSolution™ G2 Filter should not be operated during freezing temperatures and

should be disconnected, drained, cleaned and stored for the winter.

Model 700

Model 1250

thepondguy.com | 866-POND-HELP (766-3435)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ThePondguy Sistema di filtraggio dell'acqua

ThePondguy

ThePondguy SimplyClear Filter 1250 Manuale utente

ThePondguy

ThePondguy ClearSolution 120800 Guida alla manutenzione e all'assistenza

ThePondguy

ThePondguy PowerUV 9 Manuale utente

ThePondguy

ThePondguy AllClear G2 2000 Manuale utente

ThePondguy

ThePondguy clearspring mini 110572 Manuale utente

ThePondguy

ThePondguy AllClear Series Manuale utente

Manuali Sistema di filtraggio dell'acqua popolari di altre marche

Wisy

Wisy LineAir 100 Manuale utente

Schaffner

Schaffner Ecosine FN3446 Series Manuale operativo

Pentair

Pentair FLECK 4600 SXT Guida utente

H2O International

H2O International H20-500 Manuale utente

Renkforce

Renkforce 2306241 Manuale utente

Neo-Pure

Neo-Pure TL3-A502 Manuale utente

FLTR

FLTR OBF Manuale utente

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manuale utente

Applied Membranes

Applied Membranes W-G844EM Manuale utente

BEGA

BEGA 116 Manuale utente

WATA

WATA Standard Manuale utente

Price

Price FFU series Manuale

Gaggenau

Gaggenau BRITA INTENZA 467873 Manuale utente

Brita

Brita SAFF-100 Manuale utente

HEISSNER

HEISSNER FPU24000-00 Manuale utente

BGS technic

BGS technic 1518 Manuale utente

Reverse Osmosis

Reverse Osmosis RF Series Manuale utente

ubbink

ubbink Filtramax Series Manuale utente