Thermal Dynamics Ultra-Cut 400 Manuale utente

Manual No. 0-5164 rev AG

Manual Assembly Instructions

- Separate this sheet from the rest of the manual.

- Locate and remove 'Page 1' of this manual. Follow the directions on 'Page 1'.

- Locate the set of tabs for this manual.

- Locate the torch information section, which will become section 8 of this manual.

- Find the sheets saying 'Insert Section ___ tab here. Discard this sheet'. Insert the appropriate tabs

and discard the 'Insert Section ___ tab here. ' sheet.

- At Section 8, insert the torch information section.

-Insert the assembled manual sections and tabs into the 3-ring binder.

- Keep this manual with the power supply for installation, operation, maintenance, and replacement parts

information.

OPTIONAL:

Copy Section 8 (torch operational data) for operator convenience. This section includes data that will be

needed repeatedly for system operation, depending on the metal to be cut and the gases in use.

- Discard this sheet.

NOTE:

Power supply schematics are provided separately. The system operator may want to keep them with this

book or in a separate location.

Blank

Ultra-Cut®400 Plasma Cutting System

COPY CENTER:

Cut out one strip and use as spine label in binder. Discard extras.

Use next page as front cover insert in binder.

Manual No. 0-5164

Ultra-Cut®400 Plasma Cutting System

Blank

Art# A-09430

400

Operating Manual

PLASMA CUTTING SYSTEM

ULTRA-CUT™

Rev. AG Date: April 10, 2012 Manual # 0-5164

Operating Features:

Blank

Art# A-09430

400

Operating Manual

PLASMA CUTTING SYSTEM

ULTRA-CUT™

Rev. AG Date: April 10, 2012 Manual # 0-5164

Operating Features:

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new Thermal Dynamics product. We are proud

to have you as our customer and will strive to provide you with the

best service and reliability in the industry. This product is backed by

our extensive warranty and world-wide service network. To locate your

nearest distributor or service agency call 1-800-426-1888, or visit us

on the web at www.thermal-dynamics.com.

This Operating Manual has been designed to instruct you on the correct

use and operation of your Thermal Dynamics product. Your satisfac-

tion with this product and its safe operation is our ultimate concern.

Therefore please take the time to read the entire manual, especially the

Safety Precautions. They will help you to avoid potential hazards that

may exist when working with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

Thermal Dynamics is a Global Brand of manual and automation Plasma

Cutting Products for Thermadyne Industries Inc.

We distinguish ourselves from our competition through market-leading,

dependable products that have stood the test of time. We pride ourselves

on technical innovation, competitive prices, excellent delivery, superior

customer service and technical support, together with excellence in

sales and marketing expertise.

Above all, we are committed to developing technologically advanced

products to achieve a safer working environment within the welding

industry.

WARNINGS

Read and understand this entire Manual and your employer’s safety practices before installing,

operating, or servicing the equipment.

While the information contained in this Manual represents the Manufacturer's best judgement,

the Manufacturer assumes no liability for its use.

Plasma Cutting Power Supply, Ultra-Cut® 400

Operating Manual No. 0-5164

Published by:

Thermadyne Corporation

82 Benning Street

West Lebanon, New Hampshire, USA 03784

(603) 298-5711

www.thermal-dynamics.com

Thermadyne Corporation

Reproduction of this work, in whole or in part, without written permission of the

publisher is prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any

loss or damage caused by any error or omission in this Manual, whether such error

results from negligence, accident, or any other cause.

Original Publication Date: September 8, 2010

Revision Date: April 10, 2012

Record the following information for Warranty purposes:

Where Purchased: ___________________________________

Purchase Date:______________________________________

Power Supply Serial #:_______________________________

Torch Serial #:_______________________________________

This page intentionally blank

Indice

Altri manuali Thermal Dynamics Sistema di saldatura

Thermal Dynamics

Thermal Dynamics PakMaster 100 XL plus Manuale utente

Thermal Dynamics

Thermal Dynamics Ultra-cut 300 Manuale utente

Thermal Dynamics

Thermal Dynamics MERLIN 6000 Manuale utente

Thermal Dynamics

Thermal Dynamics AUTO-CUT 300 XT Manuale utente

Thermal Dynamics

Thermal Dynamics CUTMASTER 60i Manuale utente

Thermal Dynamics

Thermal Dynamics PCH-100XL Manuale utente

Thermal Dynamics

Thermal Dynamics cutskill 35A Manuale utente

Thermal Dynamics

Thermal Dynamics cutmaster A60 Manuale utente

Thermal Dynamics

Thermal Dynamics AUTO-CUT 30 O2 Manuale utente

Thermal Dynamics

Thermal Dynamics 35C Manuale utente

Thermal Dynamics

Thermal Dynamics 38 Cutmaster Manuale utente

Thermal Dynamics

Thermal Dynamics Pak Master 100XL Manuale utente

Thermal Dynamics

Thermal Dynamics CUTMASTER Manuale utente

Thermal Dynamics

Thermal Dynamics CUTMASTER 39 Manuale utente

Thermal Dynamics

Thermal Dynamics PAK Master 150XL Manuale utente

Thermal Dynamics

Thermal Dynamics CUTMASTER Manuale utente

Thermal Dynamics

Thermal Dynamics DRAG-GUN 38 Manuale utente

Thermal Dynamics

Thermal Dynamics CUTMASTER 12 Manuale utente

Thermal Dynamics

Thermal Dynamics C-70A CUTSKILL Manuale utente

Thermal Dynamics

Thermal Dynamics PakMaster 75XL Plus Manuale utente

Thermal Dynamics

Thermal Dynamics PAK Master 150XL Manuale utente

Thermal Dynamics

Thermal Dynamics CutMaster 58 Manuale utente

Thermal Dynamics

Thermal Dynamics CUTMASTER SL100SV Manuale utente

Thermal Dynamics

Thermal Dynamics 35C DRAG-GUN PLUS Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

ESAB

ESAB Buddy Arc 145 Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente