Thermal Solutions VMW12PFA03-48018-R11 Manuale utente
User Manual
Rugged Display Computer –12”
RC6600 Rugged iPC
VMW12PFA03-48018-R11
Contents
Safety Information.......................................................................................................................4
Important Information.................................................................................................................5
1 Introduction..............................................................................................................................8
1.1 Product Features.................................................................................................................. 8
1.2 Packing List...........................................................................................................................9
1.3 Appearance ........................................................................................................................10
1.4 Characteristics.................................................................................................................... 11
1.5 Dimensions.........................................................................................................................12
1.6 Exploded Drawing ..............................................................................................................13
2 Getting Started........................................................................................................................ 14
2.1 Powering On....................................................................................................................... 14
2.1.1 AC Adapter Components......................................................................................... 14
2.1.2 Power Considerations ............................................................................................. 15
2.1.3 Connecting the Power .............................................................................................16
2.2 Turning On Your Device .....................................................................................................16
2.3 Installing Operating System (OS) ....................................................................................... 17
2.4 Adjusting the LCD Display Brightness ................................................................................ 17
2.5 Connectors.........................................................................................................................18
2.5.1 Wiring Requirements .............................................................................................. 18
2.5.2 Connector Pinouts...................................................................................................19
2.6 Turning Off Your Device (Windows 7) ...............................................................................21
3 Mounting Solutions (optional)................................................................................................. 22
3.1 Cable Mounting Considerations ........................................................................................ 22
3.2 Safety Precautions ............................................................................................................. 23
3.3 Mounting Guide (optional) ................................................................................................ 23
3.3.1 VESA Mount.............................................................................................................23
4 Maintenance........................................................................................................................... 28
4.1 Cleaning the Display Screen...............................................................................................28
4.2 Cleaning the Casing............................................................................................................ 28
5 Driver Installation ................................................................................................................... 29
5.1 ELO AccuTouch/ CarrollTouch Infrared Driver Installation ...............................................29
5.1.1 Downloading Drivers ...............................................................................................29
5.1.2 Configuration Utility ................................................................................................30
5.2 The Premier Touch Driver Installation............................................................................... 32
5.2.1 Installing Touch Kit .................................................................................................. 32
5.2.2 Configuration Utility ................................................................................................33
6 Troubleshooting......................................................................................................................35
6.1 Display indistinct................................................................................................................ 35
6.2 Using USB-HDD or USB-CDROM for booting OS................................................................ 35
Pro-face America Support ..........................................................................................................37
New Product Satisfaction Return................................................................................................37
Safety Information
Warning!
Always completely disconnect the power cord from your chassis whenever
you work with the hardware. Do not make connections while the power is
on. Sensitive electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
Safety Precautions
Please read these safety instructions carefully.
Please keep this user's manual for later reference.
Please disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the equipment and
must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
The openings on the enclosure are for air convection and to protect the equipment
from overheating.
DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
If any of the following situations arises, get the equipment checked by service
personnel:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work according to the
user’s manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20° C (-4°F) or above 60° C (140° F). It may damage the
equipment.
CAUTION –Use the recommended mounting apparatus to avoid risk of injury.
WARNING –Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.
WARNING –Ground against electrostatic damage to the device by taking the
following preventive steps:
oCover workstations with approved anti-static material. Use a wrist strap connected
to a work surface and properly grounded tools and equipment.
oUse anti-static mats, heel straps, or air ionizer for added protection.
oHandle electrostatic-sensitive components, PCB’s and assemblies by the case or
the edge of the board.
oAvoid contact with pins, leads, or circuitry.
oTurn off power and input signals before inserting and removing connectors or test
equipment.
oKeep the work area free of non-conductive materials, such as ordinary plastic
assembly aids and Styrofoam.
oUse filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are
conductive.
oAlways lay drivers and PCB’s with the component side down on anti-static foam.
Important Information
Federal Communications Commission Radio Frequency Interface Statement –For USA
This device complies with part 15 FCC rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "A"
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at him own expense.
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the prior
written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
We reserves the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design
and/or performance. We assume no responsibility or liability for the use of the described
product(s), conveys no license or title under any patent, copyright, or masks work rights
to these products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. We
make no representation or guarantee that such application will be suitable for the
specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product at
no charge to the customer, provide it is returned during the warranty period of one year,
with transportation charges prepaid. The returned product must be properly packaged
in its original packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the in-
warranty service will be made according to the shipping date.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product. Second,
contact with your distributor, sales representative, or our customer service center for
technical support if you need additional assistance. You may need the following
information ready before you call:
Product serial number
Peripheral attachments
Software (OS, version, application software, etc.)
Detailed problem description
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day.
We are always ready to give advice on application requirements or specific information
on the installation and operation of any of our products. Please do not hesitate to call or
e-mail us. Pro-face America contact information, please go to
http://www.profaceamerica.com
1 Introduction
Rugged Display Computer with fan-less, low power but high performance platform
design, sunlight readable panel, WLAN integration, great ability for anti-shock &
vibration, IP65 protection and anti-corrosion coating with aluminum alloy housing. Both
of great mobility and robust design are fitting the demands for every harsh
environment applications such as logistics, transportation/ fleet management, heavy
vehicles, utility and also outdoor usage.
1.1 Product Features
Pro-face America Rugged Display Computer offers the following features:
IP65 proof enclosures (except I/O parts) ;
Fanless, streamlined enclosure for highly efficient heat dissipation;
Compliance with MIL-STD 810 & IEC 60068-2-27 for shock and vibration test;
Aluminum housing with anti-corrosion;
5-Wire Resistive Touch / anti-reflective protection glass;
Optional GPS, 3G/WLAN (either one);
Wide range 9-36 V DC input;
Compliance with EN50155.
1.2 Packing List
Carefully remove the box and unpack your device. Please check if all the items listed
below are inside your package. If any of these items are missing or damaged contact us
immediately.
Standard factory shipment list:
Panel PC
User Guide
(Panel PC)
User Manual
(Motherboard)
CD-ROM with
driver utility and
user manual
Touch Driver CD
Terminal Block
(3-pin)
Screws for VESA
Mounting
Package may include the following items based on your order (optional):
AC to DC adapter
Power Cord
WLAN
Antenna
Mounting Bracket
1.3 Appearance
Front, Side and Bottom View
1
CAN-BUS
5
2 x RJ45
2
RS-232/422/485
6
Terminal block 9-36V
3
1 x USB 2.0
1 x USB 3.0
7
OSD Panel
4
HDMI
Rear View
Questo manuale è adatto per i seguenti modelli
1
Indice
