THERMODYNE UTILLIAN 8 Manuale utente
function & form™
2 In the Box
IN THE BOX
Power Buon
Status Interface
Glass Mouthpiece
BurstHit 3D
Heang Chamber™
Mul-Tool
- 1x USB-C Charging Cable
- 1x Carrying Case
- 5x Coon Swabs
- 5x Alcohol Pads
- 2x Ruby Pearls
Carb-Cap Base
Vapor-Path
USB-C Charging Port
Base
Device Case
Interface LEDs (1-4)
12
43
3EN
Disclaimer
Glass Mouthpiece
Air Holes
Boom Hole
ENGLISH -
INSTRUCTION MANUAL
Disclaimer
UTILLIAN™ makes no representations or war-
ranties with respect to this manual and, to the
maximum extent permitted by law, expressly
limits its liability for breach of any warranty
that may be implied to the replacement of
this manual with another. Furthermore, UTIL-
LIAN™ reserves the right to revise this publica-
tion at any time without incurring an obligation
to notify any person of the revision.
UTILLIAN™ is not responsible for any mate-
rial damage or personal injury the device may
cause if used inappropriately, incorrectly or
irresponsibly or in non-compliance with the
safety instructions.
The UTILLIAN 8™ is not a medical device and
cannot diagnose, treat, or cure any illness or
medical condition.
The UTILLIAN 8™ is not a smoking cessation
device.
If you have health problems, consult a physi-
4 Disclaimer
cian before using the UTILLIAN 8™.
The UTILLIAN 8™ is not intended to be used with any illegal, medicinal, or unregulated substanc-
es. Any improper or illegal use of this product will void the limited warranty.
The information provided in this documentation contains general descriptions and/or technical
characteristics of the performance of the products contained herein. This documentation is not
intended as a substitute for and is not to be used for determining suitability or reliability of these
products for specic user applications. It is the duty of any such user to perform the appropriate
and complete risk analysis, evaluation and testing of the products with respect to the relevant spe-
cic application or use thereof. Neither UTILLIAN™ nor any of its afliates or subsidiaries shall be
responsible or liable for misuse of the information that is contained herein. If you have any sugges-
tions for improvements or amendments or have found errors in this publication, please notify us.
All pertinent state, regional, and local safety regulations must be observed when using this prod-
uct. For reasons of safety, only the manufacturer shall perform repairs to components.
5ENExplanation of Symbols
Explanaon of Symbols
Explanaon of Symbols for Potenal Hazards and Safe
& Appropriate Use
Warning
To avoid injury, it is compulsory to follow the instructions marked with
this symbol.
Please read and understand the instructional manual and the following instruc-
tions in their entirety before rst use of the device. Failure to do so may result
in serious injury or death.
Follow the instructions diligently as they are of high importance for your safety
when using or maintaining the device.
Ensure that each person who uses the product has read these warnings and in-
structions and follows them.
Keep all safety information and instructions for future reference and pass them
on to subsequent users of the product.
The latest manual is available for download on www.utillian.com.
6 Explanation of Symbols
Please read and understand this manual and its safety instructions before rst
use of the device. Failure to do so may result in serious injury or death.
Always follow the instructions in the manual when using or servicing the device.
• Only use original UTILLIAN™ accessories and spare parts.
• Keep the UTILLIAN 8™ and its components out of reach from children and
pets.
• Parts of the unit become HOT during normal use. Do not touch the heating
elements, such as the 3D heating chamber, during operation and cooling.
• Do not plug in the UTILLIAN 8™ directly after use or if the device is warm
from heating.
Safety Noce
To avoid damage to the device and equipment, and potential implica-
tions of the damage to life and limb, it is compulsory to follow the in-
structions marked with this symbol.
Warnings & Safety Instrucons
7ENExplanation of Symbols
• Do not place on surfaces that insulate the temperature build-up of the unit
from dissipating (do not place the unit on beds, couches, pillows, clothing, etc.
while charging or if still hot from use), or cover the device.
• Do not store near heat sources.
• Do not expose to extreme temperatures. Condensation of moisture may im-
pair the function of the unit as a consequence.
• Do not expose to moisture and humidity.
• Do not open or touch internal parts when powered on, when hot, or in use.
• Disconnect from power source for maintenance.
• Do not disassemble or tamper with the internal components.
• Do not use if damaged or broken.
• Do not operate unattended.
• Do not operate in an unusual manner.
• Do not use near ammable goods, such as paper, curtains or table cloth.
• Do not use in an explosive or ammable atmosphere.
• Do not operate if ammable cleaning agents or disinfectants, such as isopro-
pyl alcohol, have not fully evaporated.
• Do not use the UTILLIAN 8™ if the base becomes immersed in any liquid.
8 Explanation of Symbols
• Do not use any damaged equipment to charge the device (including damaged
adapters, anything with frayed wires, etc.).
• Do not bend or damage the charger area.
• Do not charge a defective device.
• Do not use a charger with non-standard voltage and current ratings. Use a
charge adapter with a rating not higher than 5 V ⎓2.0 A, that complies with
all currently applicable ofcial regulations.
• Do not forcefully attach or detach the Glass Mouthpiece.
• Examine glass parts periodically for cracks or other defects from handling
and drops.
• Do not use broken or cracked glass. Broken glass has sharp edges that can
cause cuts, handle with care.
Potenal Health Consequences
• Monitor the effect on your symptoms during and after use and immediately
seek medical support if you have concerns.
• Do not use if you suffer from diseases of the respiratory tract or the lungs. The
inhalation of vapor may cause coughing.
9ENEN 9EN
Operation of the Device
Recommendaon before First Use
• Fully charge the battery before rst use.
• Perform a sanitation cycle (pyrolysis) before rst use. Heat up the device with
the highest power or temperature setting for a full cycle in order to purge any
machine oils from manufacturing.
Charging
To charge your UTILLIAN 8™, plug the included USB-C Charging Cable into the
USB-C Charging Port and plug the other end into a wall adapter or computer. The
LEDs of the Status Interface and the LEDs under the Glass Mouthpiece will pulse
in white according to the charge level to let you know the device is charging. When
the LEDs are all glowing solid white, the unit is fully charged. Remove the USB-C
Charging Cable and resume use.
Charge Level
Having plugged in the USB-C Charging Cable, the LEDs will pulse in white in order
to show that the device is charging. The charge level is indicated by the count of
LEDs of the Status Interface. The more charge the battery holds, the more of the 4
Interface LEDs are illuminated.
Operaon of the Device
10 Operation of the Device
• Do not use a charger with non-standard voltage and current ratings. Use a
charge adapter with a rating not higher than 5 V ⎓2.0 A, that complies with
all currently applicable ofcial regulations.
• Do not use any damaged equipment to charge the device (including damaged
adapters, anything with frayed wires, etc.).
• Do not bend or damage the charger area.
• Do not charge a defective device.
• Do not plug in the UTILLIAN 8™ directly after use or if the device is warm
from heating.
• Do not place on surfaces that insulate the temperature build-up of the unit
from dissipating (do not place the unit on beds, couches, pillows, clothing,
etc. while charging or if still hot from use), or cover the device.
Indice
Lingue:
