ThermoUp FLOOR Manuale utente
TECHNICAL CERTIFICATE
ThermoUp FLOOR / LED / LED Plus
ThermoUp TOP 700 / 1100 / 1600
Thermop WALL
MODELS
Operating Manual
Before starting operation of the heater,
please take a close look at this Manual and keep handy
Introduction
Technical data
Safety measures
Floor-standing heater THERMOUP FLOOR/LED/LED PLUS
• Heater design
• Scope of supply
• I
nstallation and connection
Wall-mounted THERMOUP WALL
• Heater design
• Scope of supply
• Installation and connection
Ceiling heater THERMOUP TOP 700/1100/1600
• Heater design
• Scope of supply
• Installation and connection
Operation, storage and maintenance
Possible defects and remedies
Warranty
Product certification
Sale Certificate
Warranty card
INCORPORATED SYMBOLS
• In the case of damage of the power cable, in order to avoid the severe
inquiries, it must be replaced by manufacturer or authorized service or
another qualified specialist
• The heater must be installed in compliance with the current local rules and
operating procedures of the electrical networks.
• Upon installation of the heater, an electric plug must be in accessible
place.
• The heater’s power rating (it is shown on rating plate) is based upon test
conducted under specified load.
• Texts and digital notations of the Manual may include printing errors.
• If after reading the Manual, you still have the questions regarding
operation of device, please contact the seller or specialized service center
to obtain explanations.
• The item has the rating plate, which provides specifications and other
useful information on device.
NOTE
WARNING!
CAUTION!
Failure to comply with these requirements may result in severe injury or serious damage to equipment
Failure to comply with these requirements may result in severe injury or death
TABLE OF CONTENT
2
4
5
6
8
11
17
17
18
19
19
20
3
INTRODUCTION
ThermoUp is an innovative heating system for your home, office or business space.
The ThermoUp heaters warm quickly a space up to comfortable temperature regime and allow to conserve heat for a long
time, and thoughtful design with reliable control system will strike a chord with the most exacting customer. This is the ideal
solution for your home or office.
The ThermoUp heaters use in their operation a principle of combined heat irradiation: along with thermal radiation, the
heater is able to produce a convection flow that distributes heat air through specified area. An emitting surface is made of
hardened heat-strengthened glass and withstands sharp temperature fluctuations, and accidental mechanical influences
and loads.
Dear Customer!
Thank you for purchasing the ThermoUp heater!
Comfort
ThermoUp, faster than other kinds of
heater, creates comfortable temperature
conditions for all persons in a room
and allows to preserve required heat
for a long time. It warms up a space
throughout full volume uniformly and
proportionally. Possibility of zone and
spot heating of the necessary area is a
big plus.
Environmental compatibility
ThermoUp is a green and
environmentally friendly heating.
The glass heaters don’t burn an
oxygen, thus taking away draught
feeling and excluding headaches
which arise when the classic heaters
are applied. A total absence of
foul smell and irritative sound
during operation is an additional
advantage of our product line.
Cost effectiveness
Heat emission forms comfortable
feeling for human without rising air
temperature of whole space, and
energy saving is caused by this.
You warm up yourself but not cold
air. There is no irrational temperature
distribution, heat costs and losses are
decreased.
INTRODUCTION
4
INTRODUCTION
Safety
ThermoUp’s glass panel has
high shock resistance by virtue
of hardened glasses and triplex
structures, which withstand sharp
temperature fluctuations, and
accidental mechanical influences
and loads.
Operability
This is a device of new generation,
which combines both operability and
style. Smooth glass covering
is very stylish and looks presentably
within interior of offices, restaurants,
conference halls, art spaces, and
in home interior of various styles.
Several regimes of glass lighting, and
choice of possible color scores allow
the ThermoUp heaters to fit well
in interior of any space.
Usefulness
Reliable control system allows
simple and easy adjust the heater’s
temperature, it is possible to operate
through remote-control box. There are
user-friendly interface and detailed
installation and operating manuals.
The innovative ThermoUp heaters
have no any quick-wear parts that
require periodic replacement. Long
operational period
There are three kinds of heater in ThermoUp innovative line:
• Floor-standing – ThermoUp Floor / LED / LED Plus
• Wall-mounted – ThermoUp Wall
• Ceiling – ThermoUp Top 700/1100/1600
5
TECHNICAL DATA
GENERAL
TECHNICAL DATA
Table 1. Technical data of ThermoUp heaters
Name Dimension, mm Weight,
kg
Power,
W
Voltage,
V
Current
strength, A
Area to be
heated, m2
Maximum heating
temperature
of glass panel, °C
ThermoUp Floor/
LED / LED Plus
1010х569х148
15 600 220 2.7 До 12 80
ThermoUp Wall
1010х527х27
11 600 220 2.7 До 12 80
ThermoUp
Top 700
828х186х26 (190)
4.7 700 220 2.9 До 15 220
ThermoUp
Top 1100
828х278х26 (190)
6.5 1100 220 5 До 22 220
ThermoUp
Top 1600
828х368х26 (190)
8 1600 220 6.8 До 34 220
6
SAFETY MEASURES
SAFETY
MEASURES
1. The heater is an appliance and it should be protected against shocks, dust and moisture.
2. Use the heater for its designated purpose only.
3. The heaters must be located with due regard to requirements for installation specified in the Section
«Installation and connection» of this Manual.
4. Thermal element of ThermoUp Floor/ LED/ LED Plus and ThermoUp Wall is heated up to 80 °C, please try to
avoid long contact with heater during its operation. It is not recommended to leave running heater unattended
5. During operation, thermal element temperature of the ThermoUp Top 700/1100/1600 can reach 220 °C.
To avoid injury and burn, it is strongly prohibited to touch working surface of heater during its operation!
6. It is not recommended to operate ThermoUp 700/1100/1600 heater without earning, and without electric
protection from short current and overload. Connection of the heaters must be performed by skilled technician
according to Section «Installation and connection» of this operating manual.
7. Appliance must be placed away from easily combustible or deformable objects.
8. Power cord must not be in contact with hot surfaces of heater
9. It is not recommended to cover heater during its operation, it should not be used to dry clothes or any other
items – this may cause overheating or damaging the appliance. Damage of such kind will not be covered by warranty.
10. Don`t immerse heater within water or other liquids. It is possible to use the heaters in wet rooms without direct
contact of water with the heater’s surface.
11. Disconnect heater from mains when it is not used and before its washing.
12. Make sure that the heater became cool completely before placing it into package for long storage.
13. Don`t disassemble the appliance at your own discretion.
14. Don`t make alterations in the heater’s design! Any alterations result in loss of warranty.
15. In case of malfunction of the appliance, please contact the manufacturer’s service center for consulting and repair.
7
FLOOR-STANDING HEATER THERMOUP FLOOR/LED/LED PLUS
FLOOR-STANDING HEATER
THERMOUP FLOOR/LED/LED PLUS
Diagram 1. ThermoUp Floor heater
Heater design
Scope of supply
1. Heater
2. Detachable electric power cord for heater
3. Lighting control panel (for models ThermoUp Floor /
LED / LED Plus)
4. Operating manual and warranty card
Installation and connection
1. Unbox the appliance.
2. Place it on floor or any other level surface
3. Connect detachable electric power cord to appropriate
socket of appliance, then plug in wall outlet.
4. Push power button of the heater to place it into
operation mode.
5. Set required power of appliance by means of
regulator.
Recommendations for installation
Due to details of construction, when using the floor-
standing heater ThermoUp Floor a combine heat transfer
takes place. Besides infrared radiant flux, that heats the
objects within heating zone, in close proximity to the
thermal element of the heater air is heated that provides
additional convectional heat transfer
8
FLOOR-STANDING HEATER THERMOUP FLOOR/LED/LED PLUS
Figure 1. Radiated emission of ThermoUp Floor heater
In order to use the appliance with maximum efficiency and safety,
the following recommendations shall be considered:
• Install the heater close to objects that need to be heated additionally (within 3 m)
• In order to use the heater comfortably, it is recommended to install it at least 50 cm
from place of long stay of people and animals
• The appliance must not be covered, splash of water must not fall on it
• It is recommended to connect the appliance to power source directly, without extension cords
9
WALL-MOUNTED HEATER THERMOUP WALL
WALL-MOUNTED HEATER
THERMOUP WALL
Heater design
Diagram 2. ThermoUp Wall heater
1. Unbox the appliance
2. The heater is completed with the fasteners for wall-mounting
the appliance. Different walls require different holding
fixtures. Select screw nails, nailing plugs, self-tapping
screws etc. (outside the scope of supply) which are suitable
for your walls.
3. Select location for installation of the heater according to the
recommendations for installation and draw fixation scheme
using attached template.
4. Bore the holes in wall and fix 4 fasteners in order indicated
in Figure 2.
5. Secure the heater to wall using fastening elements included
to delivery set
6. Plug in the heater.
7. Press on/off button of the heater located on power cord to
set the appliance in operation mode.
Delivery set
1. Heater
2. Mounting set: 2 brackets, 2 butterfly bolts, 2 cylinders of upper fasteners
3. Operating manual and warranty card
Installation and connection
10
WALL-MOUNTED HEATER THERMOUP WALL
Figure 2. Installation of ThermoUp Wall heater
Altri manuali per FLOOR
1
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali ThermoUp Stufa
ThermoUp
ThermoUp LED Manuale utente
ThermoUp
ThermoUp FLOOR Manuale utente
ThermoUp
ThermoUp Dry Side Manuale utente
ThermoUp
ThermoUp Dry Side S Manuale utente
ThermoUp
ThermoUp TOP S 800 Manuale utente
ThermoUp
ThermoUp TOP 700 Manuale utente
ThermoUp
ThermoUp Dry Side Mini Manuale utente
ThermoUp
ThermoUp Foor Manuale utente
ThermoUp
ThermoUp Wall Black Manuale utente
ThermoUp
ThermoUp WALL Manuale utente
Manuali Stufa popolari di altre marche
Empire Heating Systems
Empire Heating Systems WCC65 Manuale utente
Wetekom
Wetekom 92 86 43 Manuale utente
Desa
Desa SPC170-F Manuale utente
Watlow
Watlow Watrod Electric Tubular Heaters Manuale utente
Haverland
Haverland ECO-DRY GPS Series Manuale elenco delle parti
Stelpro
Stelpro ASILVC2060 Series Manuale utente