ThinkGizmos TG644 Manuale utente

TG644 PROJECTION CLOCK

CONGRATULATIONS ON PURCHASING THE THINK GIZMOS PROJECTION CLOCK,

PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THIS INSTRUCTION BOOKLET

FOR FUTURE REFERENCE.

User Manual

ENGLISH MANUAL - CONTENTS

1.1 Projection Clock Features ...................................................................................3

3.1 Automatic Time/Date Setting ............................................................................ 5

3.2 Automatic Time/Date Further Information ..................................................... 5

2.1 Battery Precautions ............................................................................................ 4

2.2 Battery Installation ............................................................................................. 4

2.3 Reset Function .................................................................................................... 4

4.1 Manual Time/Date Setting.................................................................................. 6

PROJECTION CLOCK FEATURES

TIME AND CALENDAR SETTINGS

IMPORTANT INFORMATION

TIME AND CALENDAR SETTINGS CONTINUED

5. 5.1 Setting the Alarm ................................................................................................ 7

5.2 Activating and Deactivating the Alarm ............................................................. 7

5.3 Snooze Function ................................................................................................. 7

5.4 Stopping the Alarm ............................................................................................. 7

ALARM SETTING

6.1 Projection Function ............................................................................................ 8

6.2 Backlight .............................................................................................................. 8

PROJECTION AND BACKLIGHT

7.1 °C/°F Temperature Display ................................................................................8

7.2 Charging Function ............................................................................................. 8

TEMPERATURE AND CHARGING

8.1 Warranty Information ....................................................................................... 9

WARRANTY

1. PROJECTION CLOCK FEATURES

1.1 Projection Clock Features

●Radio controlled clock using MSF frequency.

●Date and day of week display.

●Perpetual calendar: 2001-2099.

●Snooze Alarm Clock.

●Temperature display in °C/°F.

●Thermometer: Indoor measurement ranges -9°C to +50 °C.

●LED back light display with projection (auto o after 5 seconds when using batteries).

●Battery: 2 x AAA 1.5V (Not included).

●DC power supply 5V DC 1.2A for continuous projection (Included).

●USB Charging Slot.

2. IMPORTANT INFORMATION

2.1 Battery Precautions

1. Alkaline batteries are recommended.

2. Incorrect use of batteries may cause damage, so please pay attention to the following:

●Do not install batteries with opposite polarity.

●When not in use and if the Projection Clock is not going to be used for a long time,

please remove the batteries to avoid corrosion.

●Do not mix old and new batteries.

●Please replace exhausted batteries as soon as possible.

●Keep batteries away from children.

●Do not place batteries near res or expose them to strong sunlight or damp

conditions.

●Please dispose of batteries carefully.

3. Careful with small parts, do not eat.

4. Do not place near re, high temperature or damp conditions.

2.2 Battery Installation

●Gently open the battery compartment located on the rear side of the unit.

●Insert 2 X 1.5V AAA batteries observing the correct polarity, as marked inside the

compartment.

●Replace the battery compartment door.

2.3 Reset Function

●If the clock is not working properly or does not respond to your input remove all

batteries and power for 30 seconds.

●This will reset the clock to factory defaults.

3. TIME AND CALENDAR SETTINGS

3.1 Automatic Time/Date Setting

●When you rst insert the batteries or connect the power all the symbols on the display

will briey light up and you will hear a signal tone. The LCD display will be lit for 2

seconds with beeping and the clock will start searching for the MSF Frequency for 7

minutes.

●To manually start the MSF signal search, press the WAVE button.

●The radio mast icon will ash showing it is searching for signal.

●Once the signal is found the Time and Date will be automatically set. If no signal is

found within 7 minutes the radio mast icon will dissapear and it will automatically start

searching again in 1 hour.

3.2 Automatic Time/Date Further Information

●At 1:00am the Projection Clock automatically carries out a synchronization procedure

with the MSF signal to correct any deviations to the exact time. If this synchronization

attempt is unsuccessful (The radio mast symbol disappears from the display), the system

will automatically attempt another synchronization at the next full hour. This procedure

is repeated automatically up to 5 times.

●If the clock cannot receive the MSF signal (because the distance is too great to receive a

signal from the transmitter in Anthorn), you have the option of setting the time manually

and instructions can be found on page 6. As soon as the reception of the MSF signal is

received the projection clock is re-adjusted automatically.

●We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of

interference, such as televisions or computer monitors.

●Radio reception can be weaker in rooms with concrete walls and in oces. In such

extreme circumstances, place the system close to the window for better signal reception.

4. TIME AND CALENDAR SETTINGS CONT.

4.1 Manual Time/Date Setting

Note: After 20 seconds without pressing any button, the clock switches automatically from

Set Mode to Normal Time Mode.

●Press and hold down the SET button for 2 seconds, the 12/24 hour mode display starts

to ash. Now use +and -buttons to set the correct 12/24 hour mode.

●Press SET to conrm your setting, the Hour display starts to ash. Now use +and -

buttons to set the correct hour.

●Press SET to conrm your setting, the Minute displays starts to ash. Now use +and -

buttons to set the correct minute.

●Press SET to conrm your setting, the date format displays starts to ash. Now use +and

- buttons to set the correct date format.

●Press SET to conrm your setting, the Year display 2016 starts to ash. Now use +and -

buttons to set the correct year.

●Press SET to conrm your setting, the Month display starts to ash. Now use +and -

buttons to set the correct month.

●Press SET to conrm your setting, the Date display starts to ash. Now use +and -

buttons to set the correct date.

●Press SET to conrm your setting and to end the setting procedure.

5. ALARM SETTING

5.1 Setting the Alarm

This Clock possesses 2 daily alarms. To view the set alarm times toggle the switch or

switch to ON and the LCD display will show the alarm time.

Note: After 20 seconds without pressing any button, the clock switches automatically from

Set Mode to Normal Time Mode.

●Press and hold down the ALARM button for 2 seconds until Alarm Time starts ashing

on the display.

●The Hour display of the Alarm will start to ash. Use the +and -buttons to set the

required hour. Press the ALARM button to conrm your settings.

●The Minute display of the Alarm will start to ash. Use the +and -buttons to set the

required minute. Press the ALARM button to conrm your settings.

●The Hour display of the Alarm will start to ash. Use the +and -buttons to set the

required hour. Press the ALARM button to conrm your settings.

●The Minute display of the Alarm will start to ash. Use the +and -buttons to set the

required minute. Press the ALARM button to conrm your settings and to end the alarm

setting procedure.

5.2 Activating and Deactivating the Alarm

●To activate or deactivate the daily alarms, briey toggle switch or switch .

5.3 Snooze Function

●While the alarm is sounding, touch the button to activate snooze function.

When the snooze fuction is active the alarm icons or will ash on the display.

●The snooze function moves the alarm back by 5 minutes and after this time it will sound

again.

●To turn o the snooze function press and button on the projection clock.

●If a snooze alarm is in process and another alarm is scheduled this will automatically

stop the snooze function and the set alarm will sound.

5.4 Stopping the Alarm

●When the alarm is sounding press any button on the back, apart from the “SNZ” button,

to stop the alarm.

●The alarm will stop sounding automatically after 2 minutes and will repear 24 hours later

at the set time.

●The alarm is a rising alarm which changes volume 4 times whilst the alarm sounds.

6. PROJECTION AND BACKLIGHT

6.1 Projection Function

●The projection lamp on the right side of the product can project the current time of the

clock on the wall or ceiling in order to see the time at night, if the projection direction is

not correct, press the button to switch the display direction.

●When the clock uses the 5V power adapter, the projection function will be on

continuously, if batteries are being used the projection will only show when the

button is pressed.

6.2 Backlight

●On batteries at any time, touch the button and the backlight will light for 8

seconds.

●When using the 5V power adapter, the projection clocks backlight will have 4 brightness

settings, high - medium - low - out, each time the button is pressed it will

change the brightness setting.

7. TEMPERATURE AND CHARGING

7.1 °C/°F Temperature Display

●The temperature is displayed either in °C or °F. Pressing the -button allows you to switch

between the individual models.

7.2 Charging Function

●When using the 5V power adapter, the USB plug on the left side of the projection clock

can be used for charging mobile phones etc.

●The charging function will stop if the projection clock is searching for the MSF signal and

will start working again once it has been found.

8. WARRANTY

8.1 Warranty Information

Think Gizmos, Unit 19, Lawson Hunt Industrial Park,

Broadbridge Heath, West Sussex, RH12 3JR

Tel.: +44/(0)203 384 8304

[email protected] ●www.thinkgizmos.com

What is Covered:

This warranty covers any defects in materials or workmanship, with the exceptions stated

below.

How Long Coverage Lasts:

This warranty runs for 1 Year from the date your Projection Clock is delivered.

What is not covered:

Any problem that is caused by abuse, misuse, or an act of God (such as a ood) are not

covered.

What We Will Do:

If the Product proves defective during the warranty period, we will provide you with the

instructions for the return, and we will take one of the following actions: (i) replace the

Product with a product that is the same or equivalent to the Product you purchased; (ii)

repair the Product; or (iii) refund to you the whole of or part of the purchase price of the

Product.

How To Get Service:

To obtain instructions on how to obtain service under this warranty, contact our customer

service by phone or email. You will nd the contact details of our customer service below.

Customer service may ask you questions to determine your eligibility under this warranty,

and if you are eligible you’ll be given instructions for returning the defective Product. If

we send you a replacement or repair your Product, we will pay the cost of delivering the

replacement or repaired Product to you.

Do not return the item to the original place of purchase, please contact Think

Gizmos direct.

“CE” marking states that the product is compliant to European Directives

2014J35/EU Low Voltage Directive (LVD)

2004/108/EC EMC Directive

It is possible to request a full copy of Declaration of compliance from the

Distributor:

This product complies with the rules of RoHS Directive(2011/651EU)

This product complies with the rules of Eup Directive(2009/125/EC)

Thinkgizmos is a registered trademark of Paramount Zone Ltd

Meaning of the ‘Dustbin’ Symbol:

To protect our environment, do not dispose of electrical equipment in with domestic waste.

Please return any electrical equipment that you will no longer use to the collection points

provided for their disposal.

This helps to avoid the potential eects of incorrect disposal on the environment and human

health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic

equipment.

Information concerning where the equipment can be disposed of can be obtained from your

local authority.

Altri manuali per TG644

Indice

Altri manuali ThinkGizmos Orologio

ThinkGizmos

ThinkGizmos TG644 Manuale utente

ThinkGizmos

ThinkGizmos TG902 Manuale di istruzioni

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

La Crosse Technology

La Crosse Technology WS-8256-AL Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

La Crosse Technology

La Crosse Technology WT-3141b Manuale

La Crosse Technology

La Crosse Technology W86531 Manuale utente

Sharp

Sharp SPC900 Manuale utente

La Crosse Technology

La Crosse Technology 404-50447 Manuale utente

Datexx

Datexx DF0063 Manuale utente