Thinkware SNAP G Manuale utente
USER GUIDE
SNAP G is a portable gimbal camera that combines ease of use and functionality.
2
Contents
1. Basicinformationoverview 3
1.1 Includeditems 3
1.1.1 Standarditems 3
1.1.2 Accessories(soldseparately) 3
1.2 Partnames 4
1.2.1 Mainunit(front/backview) 4
1.2.2Mainunit(sideview) 4
1.2.3Mainunit(top/bottomview) 5
1.3 Removingandinsertingthememorycard 5
1.4 Removingandinsertingthebattery 5
1.5 Chargingtheproduct 6
1.6 Turningtheproducton/off 6
1.7 Checkingthebatterylevel 7
1.8 Safetyinformationforproperuse 7
2. Usingtheproduct 8
2.1 OverviewoftheLCD 8
2.1.1 Mainmenutree 8
2.1.2UsingtheLCDfunction 9
2.1.3Screenlayout 9
2.2 Usingthebuttons 11
2.3 OverviewofLEDstatusandbeep 12
3. OverviewofSNAPGfeatures 13
3.1 UsingAItrackingmode 13
3.2 Facetrackingmode 14
3.3 UsingFACEID 15
3.4 Usingheadtrackingmode 16
3.5 Usingdynamicmotionrecordingmode 17
3.6 Updatingthefirmware 18
4. UsingtheSNAPGapp 19
4.1 DownloadingtheSNAPGapp 19
4.2 Usinglivestreaming 19
4.3 UpdatingfirmwarewiththeSNAPGapp 21
5. Usingrecordingmodes 22
5.1 Usingvideomodes 22
5.2 Usingphotomodes 23
5.3 Settingpresets 25
6. Settingthegimbal 26
6.1 Settingthegimbal 26
6.2 Usingthegimbalmode 26
7. Viewingalbum 27
7.1 OverviewoftheAlbumscreen 27
7.2 Deletingfilesinthealbum 27
8. Configuringthesystemsettings 28
8.1 Connectionsettings 28
8.2 Recordingsettings 28
8.3 Othersettings 29
8.4 Systeminformation 29
9. Specifications 30
3
1. Basic information overview
1.1 Included items
1.1.1 Standard items
Quick start guide Strap
Main unit USB-C cable Battery Pouch
1.1.2 Accessories (sold separately)
Mini tripod / Head tracker / Microphone / Backpack mount / Battery charger / ND filter
Visit the THINKWARE homepage (http://thinkware.com) to buy extra included items and accessories.
Basic information overview
4
1.2 Part names
1.2.1 Main unit (front/back view)
Camera
Pan motor
Speaker
Trigger
M4 mount
connector
Strap holder
LCD
LED status
Recording button
Joystick
Mode/Power button
Battery cover
1.2.2 Main unit (side view)
Roll motor
Microphone
USB port/SD card slot cover
USB-C port
Microphone
External microphone port
microSD card slot
Basic information overview
5
1.2.3 Main unit (top/bottom view)
Tilt motor
Battery cover
release button
1/4” mount
1.3 Removing and inserting the memory card
Before removing the memory card, ensure that the product is
turned off. Gently push the bottom of the memory card with your
fingernail to release it, and then remove it from the product.
To insert the memory card, open the USB/SD card slot cover,
ensure that the memory card is in the correct direction, and
insert it into the slot until you hear a click.
Ensure that the memory card is in the correct direction
before inserting it into the product. The product slot or the
memory card may be damaged if it is inserted incorrectly.
• For more information about the recommended Micro SD
cards, visit http://www.thinkware.com/help.
• The recommended Micro SD cards are subject to change
and SD cards from manufacturers other than THINKWARE
are not guaranteed to operate properly.
1.4 Removing and inserting the battery
2
1
➊➊
➋➋
➌➌
• For optimal performance, use a genuine SNAP G battery.
• The performance of the product may be limited and the
camera performance is not guaranteed if you do not use an
authentic SNAP G battery. For more information on battery
safety and use, refer to the Battery Information Guide.
1
Open the battery cover by pressing the battery cover
release button and take out the battery by holding the
grooves on both sides of the battery.
2
Insert the new battery in the correct direction.
The product uses a removable battery. Ensure that the battery
cover is tightly closed and sealed before using the product.
Basic information overview
6
1.5 Charging the product
1
Connect the product to a USB adapter or computer USB port
using the included USB cable.
Fully charge the battery before using the product for the
first time.
2
When charging is complete, the LED indicator of the product
will turn off.
• It takes 150 minutes to fully charge the battery. (You can
charge two batteries at the same time by using SNAP G
battery charger.)
• For the fastest charging of the product, use the SNAP G
charger (sold separately).
• Charging time may vary depending on the charging
environment.
1.6 Turning the product on/off
Short press the button on the product to turn the product
on. To turn the product off, press and hold the button.
Be careful when storing or carrying the product as the power
may be turned on by pressing the power button.
The welcome mode is turned on when the product is turned
on. To turn welcome mode off, set it on the gimbal settings
menu.
Basic information overview
7
1.7 Checking the battery level
The remaining battery level can be checked through the battery icon displayed at the top-right part of the
LCD screen.
When the product is turned on, the remaining battery level is displayed as a number, and over time, the
remaining battery level is displayed as a battery icon.
1.8 Safety information for proper use
Read the following safety information to properly use the product.
Product operation
• If the product is impacted, it may malfunction or break down.
• Avoid contact with sand and liquid to protect the gimbal motor and sensors, etc.
• If the product is used in a high temperature environment for a long period of time, it may enter the
overheat protection mode and stop recording.
• Close the cover to prevent foreign objects from entering the memory slot and USB port before using the
product.
• Be careful not to get foreign objects inside the battery cover.
Product management
• This product is not waterproof. Clean the product with a soft cloth without using any liquid.
• Foreign objects on the camera lens may crack or break the lens. Clean with a soft cloth.
• Do not use a pointed object or compressed air when removing foreign objects from the microphone hole.
• Store the product in the enclosed soft pouch. Do not impact the gimbal motor when storing the product.
8
2. Using the product
2.1 Overview of the LCD
2.1.1 Main menu tree
The main menu tree of the product is as follows.
Settings menu
Gimbal quick setting
Album
Preset
Using the product
9
2.1.2 Using the LCD function
You can use the corresponding function by sliding the LCD in each direction.
• Swipe Up: Moves to the preset mode.
• Swipe Down: Moves to the settings.
• Swipe Left: Moves to the gimbal quick settings.
• Swipe Right: Moves to the album.
2.1.3 Screen layout
Preview screen layout
When the product is turned on, the camera preview, recording mode, battery level, and micro SD card
information are displayed on the LCD.
➊➊➋➋➌➌
➎➎➏➏➐➐
➍➍
Num Description
➊➊
Displays SD card information and status.
(Estimated recordable time/SD card not inserted/
Insufficient memory capacity/Error)
➋➋
Displays the Wi-Fi status.
➌➌
Displays the battery status.
➍➍
Tap on the preview screen to hide or show the
icons on the screen.
➎➎
• Displays the currently set mode.
• Touch to change video and photo modes.
➏➏
• Displays the recording settings of the currently
set mode.
• Swipe or touch the screen to move to the settings.
➐➐
In photo mode
• Touch to set the timer.
In video mode
• Touch to use dynamic motion recording mode.
Using the product
10
Quick Setting Menu Screen
➊➊➋➋➌➌
➎➎➏➏➍➍
➐➐➐➐➑➑➒➒
Num Description
➊➊
Turning Wi-Fi on/off
➋➋
Turn the grid on/off (display grid in preview screen)
➌➌
System settings
➍➍
LCD brightness
➎➎
Turn beep on/off
➏➏
Gimbal settings
➐➐
Switch to full screen
(Switch the preview screen from 16:9 to full screen)
➑➑
Switch landscape/portrait mode
➒➒
Turn live streaming on/off
Gimbal quick setting menu screen
➊➊
➋➋
➌➌
➎➎
➏➏
➍➍
Num Description
➊➊
Gimbal mode settings
➋➋
Switch tracking mode
➌➌
Switch front/selfie mode
➍➍
Connect head tracker
➎➎
Turn FACE ID on/off
➏➏
Gimbal center alignment
Indice
Altri manuali Thinkware Macchina fotografica digitale
