Important Safety Rules
a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b)Avoid dangerous environments. Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c)Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
d)Keep the tool pointed away from yourself and others at all time and keep hands, any body parts
away rear area to Safety guard against possible injury.
e)Use safety equipment. Always wear eye protection and ear protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions.
f)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
g)Do not keep the trigger or safety depressed during loading fasteners or the unintentional firing of a
fastener would cause personal injury.
h)Disconnect the tool from the power source before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
i)Do not fire if the nails/staples are jammed. This will cause damage to the driver blade and could
invite accidents.
j)DO NOT use on hard surface such as rock, concrete, masonry, bricks or steel. Person injury or
damage to the power tool could result.
k)Do not drive fasteners close to the edge of the work piece.
l)Do not drive fasteners on top of nailed fastener.
Only use parts and accessories recommended by manufacturer.
BATTERY TOOL USE, CHARGING AND CARE
a)Recharge only with the charger and the battery packs specified by the manufacturer.
b)Ensure the switch is in the off position before inserting battery pack.
c)Do not open the battery. Danger of short-circuiting.
d)Protect the battery against heat, e.g., also against continuous sun irradiation and fire. There is
danger of explosion.
e)Do not short-circuit the battery. There is danger of explosion.
f)Battery leakage (liquid ejection). Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, flush them with
clean water for at least 10 minutes, then seek immediate medical attention. Liquid ejected from the
battery may cause irritation or burns.
g)Care when charging. Make sure cord for the charger is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress. Do not operate charging system with
damaged cord or plug.
h)Battery recycling and disposing. All batteries must be recycled or disposed of properly (see section
on Environment).
SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
FUNCTIONAL DESCRIPTION
Intended Use
The machine is intended for tacking of cardboard, insulating material, fabric, foils, leather and similar
materials on surfaces of wood or materials similar to wood. The machine is not suitable for the
attachment of wall .
LED INDICATOR:
LED Functions of power tool and charger, LED will be on to indicate status of power tool and
charger:
Power tool:
02
