Third Party Companies H.264 Manuale utente

N211_system_V0.9

H.264 NETWORK CAMERA

USER MANUAL

Please read instructions thoroughly before operation and retain it for future reference.

IMPORTANT SAFEGUARD

All lead-

free products offered by the company comply with the requirements of the

European law on the Restric

tion of Hazardous Substances (RoHS) directive, which means

our manufacture processes and products are strictly “lead-

free” and without the hazardous

substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European

Union the product

must be collected separately at the product end-of-

life. This applies to your product and

any peripherals marked with this symbol. Do not dispose of these products as unsorted

municipal waste. Contact your local dealer for procedures for recycling this equipment.

Disclaimer

We reserve the right to revise or remove any content in this manual at any time. We do not warrant or

assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The

content of this manual is subject to change without notice.

Grounding

This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the power

cord). The mains plug shall only be inserted in a socket outlet provided with a protective earth contact. Any

interruption of the protective conductor inside or outside of the instrument is likely to make the instrument

dangerous. Intentional interruption is prohibited.

Water & Moisture

Do not expose this product to dripping or splashing and that no objects filled with liquids, such as vases,

shall be placed on the product.

Trademark Acknowledgements

Internet Explorer, Microsoft, Windows, Mozilla & QuickTime are registered trademarks of the respective

holders.

MPEG4 Licensing

THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR

THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN

COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING

MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND

NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY

MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY

OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL

AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE

HTTP://WWW.MPEGLA.COM.

GPL Licensing

This product contains codes which are developed by Third-Party-Companies and which

are subject to the GNU General Public License (“GPL”) or the GNU Lesser Public License

(“LGPL”).

The GPL Code used in this product is released without warranty and is subject to the

Further source codes which are subject to the GPL-licenses are available upon request.

We are pleased to provide our modifications to the Linux Kernel, as well as a few new

commands, and some tools to get you into the code. The codes are provided on the

FTP

site, and please download them from the following site or you can refer to your distributor:

ftp://ftp.dvrtw.com.tw/GPL/AV074/

Version

Firmware: 1035-114-1013-1004

Video Viewer AP Software: 0133

TABLE OF CONTENTS

1. OVERVIEW......................................................................................................................................... 1

1.1 Product Features .................................................................................................................................... 1

1.2 Package Content .................................................................................................................................... 1

1.3 Hardware Overview ................................................................................................................................ 1

1.4 Rear Panel ............................................................................................................................................. 2

2. BEFORE USING THE NETWORK CAMERA ..................................................................................... 3

3. ACCESSING THE CAMERA VIA VIDEO VIEWER ............................................................................. 4

3.1 Accessing the camera............................................................................................................................. 4

3.2 Control panel overview ........................................................................................................................... 4

3.2.1 Simplified Version (Default)..............................................................................................................................4

3.2.2 Full Function Version........................................................................................................................................5

3.2.3 Main Button Overview ......................................................................................................................................5

3.3 Frequently-used functions....................................................................................................................... 6

3.3.1 Record..............................................................................................................................................................6

3.3.2 Playback...........................................................................................................................................................6

3.3.3 Firmware Upgrade ...........................................................................................................................................7

3.3.4 E-Map...............................................................................................................................................................7

4. SYSTEM CONFIGURATION ............................................................................................................ 12

4.1 General................................................................................................................................................. 13

4.1.1 Log .................................................................................................................................................................13

4.1.2 Account...........................................................................................................................................................13

4.1.3 OnLineUser ....................................................................................................................................................15

4.1.4 Trigger ............................................................................................................................................................15

4.2 Network ................................................................................................................................................ 16

4.2.1 QoS ................................................................................................................................................................16

4.2.2 DDNS .............................................................................................................................................................16

4.2.3 SNTP..............................................................................................................................................................17

4.2.4 FTP.................................................................................................................................................................17

4.2.5 MAIL ...............................................................................................................................................................17

4.2.6 Filter ...............................................................................................................................................................18

4.2.7 UPnP ..............................................................................................................................................................18

4.3 Video .................................................................................................................................................... 19

4.4 Color..................................................................................................................................................... 19

4.5 Time ..................................................................................................................................................... 20

5. ACCESSING THE CAMERA VIA WEB BROWSER.......................................................................... 21

5.1 Accessing the camera........................................................................................................................... 21

5.2 Control panel overview ......................................................................................................................... 22

5.2.1 Live View Panel..............................................................................................................................................22

5.2.2 System Configuration Panel...........................................................................................................................23

1. OVERVIEW

1.1 Product Features

Low-latency video streaming with H.264 compression format for sharp and clear images

Hybrid digital / analog video output

It is friendly to use by wizard with browser

Motion detection

Complete IP surveillance system, such as the Central Management System (CMS) software,

Network-Attached Storage (NAS), Network Video Recorder (NVR), etc.

1.2 Package Content

□Network camera □RJ45 network cable

□Installation Guide □Adapter

□CD-ROM disc (includ

ing user manuals & CMS

software “Video Viewer”) □Bracket

1.3 Hardware Overview

1.4 Rear Panel

CONNECTOR / BUTTON DESCRIPTION

Reset Default This button is hidden in the pinhole. Press and hold the reset button until the

network camera rebooted. This will reset all parameters, including the IP address

to factory default settings.

Power Indicator When the camera is power-supplied, this indicator will be on as red.

Video Output Connect to the video input connector of your monitor with a video cable (i.e. a RCA

cable with the BNC connector, or a coaxial cable for video output.

* The video cable is optional.

LAN Connect the camera to the network with the supplied RJ45 cable.

Power Connector Connect the DC 12V adapter for power supply.

2. BEFORE USING THE NETWORK CAMERA

Before using the network camera, make sure:

1) You have installed the supplied CMS software, “Video Viewer”.

2) You have configured the network settings, and the network connection is fine.

If not, please refer to your the installation guide.

This network camera can be accessed via our supplied CMS software “Video Viewer”, or the web

browser “Microsoft Internet Explorer” or “Mozilla Firefox” depending on different using situations.

To check or configure up to 16 surveillance devices simultaneously with the record function, please use

“Video Viewer”.

For details about using Video Viewer, please refer to “3. ACCESSING THE CAMERA VIA VIDEO

VIEWER” at page 4, and “4. SYSTEM CONFIGURATION” at page 12.

To check or configure this network camera only, it’s recommended to use the web browser “Microsoft

Internet Explorer” or “Mozilla Firefox”.

For details about using the web browser, please refer to “5. ACCESSING THE CAMERA VIA WEB

BROWSER

” at page 21.

3. ACCESSING THE CAMERA VIA VIDEO VIEWER

3.1 Accessing the camera

Step1:Double-click “ ” on your PC desktop to open Video Viewer. By defaults, the “Address

Book” panel will be displayed on the right side of the control panel.

Step2:Click “ ” to select the IP address of the camera you intend to connect, and double-click

it.

Step3:The live view is displayed in the Video Viewer.

3.2 Control panel overview

Two control panels are available and can be switched depending on your using habit.

3.2.1 Simplified Version (Default)

3.2.2 Full Function Version

3.2.3 Main Button Overview

Button Funct on Descr pt on

S mpl f ed Full Funct on

Address Book Click to show the predefined IP address(es). You can add, remove or

search the IP address to log in the DVR remotely.

Miscellaneous

Control

Remote

Config

Click to go to the detailed system configuration.

For details, please refer to “4. SYSTEM

CONFIGURATION” at page 12.

Record

Setting

Click to go to the detailed record setting. For

details, please refer to “3.3.1 Record” at page 6.

Custom

Setting

Click to choose the language of this program, or

set the password when activating this program.

The changes will take effect when this program

is closed and executed again.

Log Click to view all event and recording logs, search the desired log(s) by

date, or playback the recording of the selected log.

Record / Record

Stop

Click to start / stop the manual recording.

The record button will be disabled when the reserved disk capacity set in

“Record Setting” is larger than the current disk capacity. For details,

please refer to “3.3.1 Record” at page 6.

Snapshot Click to take a snapshot of the current view. The snapshot will be saved

in the path you specified in “Record Setting”.

Information Click to show the current network connection details.

3.3 Frequently-used functions

3.3.1 Record

To record remotely, click “ ” or “ ” →“ ” to go to the “Record Setting” page.

In the “Record Setting” page, you can set the following items:

‧Record type

‧Pre- / post-event record time (0~10 seconds)

‧Record time setting

‧Record path

Note: The record function will be disabled when the reserved disk capacity in “Reserved MB)” is larger

than the current disk capacity in “Free MB)”.

When “Manual” is checked, click “ ” or “ ” on the main control panel to start the manual recording

immediately, and the recordings will be saved in the location specified in “Record Path”.

When “Motion” and / or “Alarm” are checked, the recording function will be enabled for any motion or alarm event,

and the recordings will be saved in the location specified in “Record Path”.

3.3.2 Playback

To play a recording, click “ ” or “ ”, and select the “Record” tab. A list of all the recordings will be shown by

defaults, and you can also sort out the logs you want to speed up the search time.

3.3.3 Firmware Upgrade

This function is used when users need to upgrade the network camera for function scalability.

Note: Before using this function, make sure you have the correct upgrade files provided by your installer

or distributor.

Step1: Click “ ”, and select the IP address of your network camera in the address book.

Step2: Click “ ” to show the upgrade page, “Update Server”.

Step3: Click “Add” to browse to the upgrade files.

Step4: Click “Upgrade Firmware” to start firmware upgrade.

Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware

upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.

Step5: Select the IP address of the camera and click “ ” again to check if the firmware is upgraded.

3.3.4 E-Map

Video Viewer is also a Central Management System (CMS) software, which allows network device control &

management for up to 16 devices simultaneously.

Note: Before using this function, make sure Video Viewer is connected to all the devices up to 16) you

want to monitor.

E-Map is ONLY available when the control panel is switch to the full function version.

How to Add an E-Map Group

STEP1: In the simplified version, click “ ” to switch the control panel to the full function version, and click “ ”

to enter the E-Map page as follows.

Note: To know where the buttons are, please refer to “3.2.1 Simplified Version Default)4 at page 4, and

“3.2.2 Full Function Version” at page 5.

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente