RF11iQ Warranty and User Manual
3.5 SMARTPHONE APP
The RF11iQ has a revolutionised remote control of a power filtration & distribution system the use
of a Smartphone App. It has some additional features:
•Indication of circuits that are turned “ON” with green or orange shading.
•Outlets Alarm Indication and Reset
(Circuit 1) - AUS Aus 1-7 Outlets Alarm indication and reset
(Circuit 2) - IEC IEC X 4 Outlet Alarm indication and reset
•Buzzer Control allowing you to switch the buzzer of or on remotely.
•Incoming AC Voltage monitoring “~” displayed on screen
•Individual Outlet Current Monitoring displayed in yellow text.
Note the coloured circle indications as they are important
Switched on current draw less than 0.3A
Switched on current draw greater than 0.3A
Switched off no current draw
Current Load (A) Display (A) Criteria Switched
0 Black / Grey No Ring No Text No load OFF
0.1A - 0.3A Orange/Brown Ring No Text Insufficient load to
register a display
ON
0.4A - 2A Green Ring & Yellow Text
0.4A - 2.0A
Increments in 0.1A steps ON
2.1A - 8.0A Green Ring & Yellow Text
2.5A - 8.0A
Increments in 0.5A steps ON
8.0A - 10A Green Ring & Yellow Text
8.0A
Max display is 8A ON
2RF11RP Warranty & User Manual
Thor Technologies Pty Ltd reserves the right to alter or change the specications and/or product as
and when deemed necessary to keep in line with the Company policy of ongoing improvement in
research, development and features of the product range.
1. INTRODUCTION
Thank you for choosing theTHOR Smart Rack Guard Remote (RF11RP).
The Smart Rack Guard Remote (RF11RP) has been designed with
industry leading technology of integration of secure IP based
monitoring functions with the ability to communicate via a web
browser or Smartphone application. This remote access will allow
users, particularly service technicians, immediate advice of any
high voltage incident or damage aecting the premium-ltered
protector. This manual will explain how to setup and use these
features of the product to ensure integrity and security standards
are maintained.
Purpose
Why is there a need to communicate with a ltered surge protector?
Today many electrical appliances have the ability to be turned on
or o remotely. In many instances service personnel can monitor
systems and equipment to ensure they are performing correctly.
Instant advice of a problem can save on downtime and reduce
associated call outs. Early detection to faults and the ability to reset
equipment remotely can relieve expensive call out costs.
The RF11RP can alert via email should the product sustain any
damage from a power surge or other high voltage incident. If either
of the two separate inbuilt power circuits are aected, an email will
be sent immediately to advise of such an event. At the same time an
automated on board alarm sounds (within the unit), if damage has
been sustained and the product needs replacing. Once the email has
alerted a service technician of a problem they can log into the site
through a web browser or mobile application, diagnose and make a
decision on what needs to happen next. The alarm can be turned o
remotely by the service technician.The ability to switch o the alarm
may alleviate concern or potential annoyance once the fault has
been detected and the need for an alarm expires.
2RF11RP Warranty & User Manual
Thor Technologies Pty Ltd reserves the right to alter or change the specications and/or product as
and when deemed necessary to keep in line with the Company policy of ongoing improvement in
research, development and features of the product range.
1. INTRODUCTION
Thank you for choosing theTHOR Smart Rack Guard Remote (RF11RP).
The Smart Rack Guard Remote (RF11RP) has been designed with
industry leading technology of integration of secure IP based
monitoring functions with the ability to communicate via a web
browser or Smartphone application. This remote access will allow
users, particularly service technicians, immediate advice of any
high voltage incident or damage aecting the premium-ltered
protector. This manual will explain how to setup and use these
features of the product to ensure integrity and security standards
are maintained.
Purpose
Why is there a need to communicate with a ltered surge protector?
Today many electrical appliances have the ability to be turned on
or o remotely. In many instances service personnel can monitor
systems and equipment to ensure they are performing correctly.
Instant advice of a problem can save on downtime and reduce
associated call outs. Early detection to faults and the ability to reset
equipment remotely can relieve expensive call out costs.
The RF11RP can alert via email should the product sustain any
damage from a power surge or other high voltage incident. If either
of the two separate inbuilt power circuits are aected, an email will
be sent immediately to advise of such an event. At the same time an
automated on board alarm sounds (within the unit), if damage has
been sustained and the product needs replacing. Once the email has
alerted a service technician of a problem they can log into the site
through a web browser or mobile application, diagnose and make a
decision on what needs to happen next. The alarm can be turned o
remotely by the service technician.The ability to switch o the alarm
may alleviate concern or potential annoyance once the fault has
been detected and the need for an alarm expires.
10
RF11iQ Warranty & User Manual
If a unit requires a “Factory Reset” the user must follow the following instructions.
• Turn OFF power to the unit (Power ON / OFF Switch on the Front Panel)
• Push and hold the CPU RESET Switch (Located on the rear of the unit near the
LAN Connector) and Turn ON the unit. Keep holding the CPU RESET Switch till the
buzzer sounds (approx. 10-15 seconds) release the CPU RESET switch.
The unit has now been reset to factory default state.
NOTE: In a Factory Reset Default Mode ALL outlets are reset to the “OFF” position
and must be switched on via the Smartphone App or through the web browser.
3.5 SMARTPHONE APP
The RF11iQ has a revolutionised remote control of a power ltration & distribution
system the use of a Smartphone App. It has some additional features:
• Indication of circuits that are turned “ON” with green shading.
• Outlets Alarm Indication and Reset
(Circuit 1) - AUS Aus 1-7 Outlets Alarm indication and reset
(Circuit 2) - IEC IEC X 4 Outlet Alarm indication and reset
• Buzzer Control allowing you to switch the buzzer of or on remotely.
• Incoming AC Voltage monitoring 215VAC-270VAC displayed on screen.
• Individual Outlet Current Monitoring displayed in yellow.
NOTE:
Current Load (A) Display (A) Criteria Switched
0 Black / Grey No Ring No Text No load OFF
0.1A - 0.3A Orange/Brown Ring No Text Insufcient load to
register a display
ON
0.4A - 2A Green Ring & Yellow Text
0.4A - 2.0A
Increments in 0.1A steps ON
2.1A - 8.0A Green Ring & Yellow Text
2.5A - 8.0A
Increments in 0.5A steps ON
8.0A - 10A Green Ring & Yellow Text
8.0A
Max display is 8A ON
SWITCHED ON CURRENT
DRAW LESS THAN 0.3A
SWITCHED ON CURRENT
DRAW GREATER THAN 0.3A
SWITCHED OFF
NO CURRENT DRAW
NOTE THE COLOURED CIRCLE
INDICATIONS AS THEY ARE IMPORTANT
