Thrustmaster T248 Manuale utente

T248 (Xbox One/XBox Series/PC)

English - Wake-up method (Bootloader): procedure to wake up your T248 (Xbox

One/XBox Series/PC) racing wheel if it will not power on at all and is not recognized

or detected by your PC, Xbox One™, Xbox Series X™, Xbox Series S™(in the event

of a loss of firmware).

Français - Méthode de réveil (Bootloader) : procédure pour réveiller votre volant

T248 (Xbox One/XBox Series/PC) s’il ne s’allume pas du tout et n’est pas reconnu,

détecté, par votre PC, Xbox One™, Xbox Series X™, Xbox Series S™(en cas de

perte de firmware)

Deutsch - Wake-up-Methode (Bootloader): Verfahren zum Aufwecken Ihres 
Rennlenkrads T248 (Xbox One/XBox Series/PC) wenn es sich nicht mehr 
einschalten lässt und von Ihrem PC, Xbox One™, Xbox Series X™, Xbox Series S™
nicht erkannt wird (im Falle eines Verlusts der Firmware). 
 
Español - Método de reactivación (Bootloader): procedimiento para reactivar tu 
volante de carreras T248 (Xbox One/XBox Series/PC) si no se enciende en absoluto 
y tu PC, Xbox One™, Xbox Series X™, Xbox Series S™no lo reconoce o detecta 
(en caso de pérdida de firmware). 
 
Italiano - Metodo di riattivazione (Bootloader): procedura per riattivare il tuo 
volante T248 (Xbox One/XBox Series/PC) qualora non si dovesse più accendere del 
tutto e non venisse rilevato o riconosciuto dal tuo/dalla tua [PC, consoles] (in caso di 
perdita del firmware). 
 
Português - Método de reativação (Bootloader): procedimento para reativar o seu 
volante T248 (Xbox One/XBox Series/PC) no caso de o mesmo não se ligar de todo 
e não for reconhecido ou detetado pelo(a) PC, Xbox One™, Xbox Series X™, Xbox 
Series S™(na eventualidade de uma perda de firmware). 
 
Nederlands - Wekmethode (Bootloader): procedure om uw T248 (Xbox One/XBox 
Series/PC) -racestuur wakker te maken als het totaal niet wil inschakelen en niet 
wordt herkend of gedetecteerd door uw PC, Xbox One™, Xbox Series X™, Xbox 
Series S™(in geval van verlies van firmware). 
 
日本語 - ウェイクアップ方法 (Bootloader): T248 (Xbox One/XBox Series/PC) ステ
アリングコントローラーの電源が入らず、PC, Xbox One™, Xbox Series X™, Xbox 
Series S™で認識・検出されない場合 (ファームウェアが失われた場合) にウェイク
アップするための手順です。 
 
简体中文 - 唤醒方法 (Bootloader)：当 T248 (Xbox One/XBox Series/PC) 完全无法
开机并且未被 PC, Xbox One™, Xbox Series X™, Xbox Series S™识别出或检测到时
（在固件丢失的情况下）唤醒该方向盘的程序。 
 
한국어 - 절전 모드 해제 방법(Bootloader): T248 (Xbox One/XBox Series/PC) 의
레이싱 휠전원이 켜지지 않고 PC, Xbox One™, Xbox Series X™, Xbox Series S™
인식하거나 감지하지 못하는 경우, 레이싱 휠을 절전 모드에서 해제하는 절차(펌웨어 
분실 시)입니다. 
 
 
 
 
 
 
 
 

Wake-up method (Bootloader): procedure to wake up your T248 (Xbox

One/XBox Series/PC) racing wheel if it will not power on at all and is not

recognized or detected by your PC, Xbox One™, Xbox Series X™, Xbox

Series S™(in the event of a loss of firmware).

Important note:

The wake-up procedure only applies in the specific case whereby the racing wheel

base will not power on:

- The racing wheel does not self-calibrate (automatic movements of the wheel

rim from left to right).

- No LEDs light up on the racing wheel’s servo base

System requirements: PC running Windows® 10 or more recent.

Things to verify before getting started:

- The power supply’s connector must be properly inserted at the back of

the racing wheel base

- The power plug must be properly plugged into a wall outlet

- Nous recommandons d'éviter l'utilisation de rallonge, de multiprise ou

de transformateur de courant

- The racing wheel base must be directly connected to a USB port on the

oWe recommend that you avoid using a USB hub, a USB extension,

or any other type of connection extension

1) Make sure that you have installed the latest PC - DRIVERS FORCE FEEDBACK

driver on your PC. If necessary, you will find the driver for your device on our website,

in the Drivers section:

https://support.thrustmaster.com/product/t248x/

Restart your computer to complete the update.

During this procedure :

- DO NOT CONNECT the racing wheel to your PC before being prompted to do so

- The racing wheel must be directly connected to a USB port on the PC. We

strongly recommend that you do not use a USB hub or a USB extension for this

procedure.

2) Start up the racing wheel in [Boot] mode

- Disconnect the USB connector from the computer.

- Press and hold down the MODE button (located in the central area of the

T248 racing wheel) and reconnect (while continuing to keep the MODE

button pressed down) the USB connector to the computer.

- Once the USB connector is reconnected to the computer, release the

MODE button.

Notes:

- During this procedure, the racing wheel does not self-calibrate (automatic

movements of the wheel rim from left to right) when connected to the

computer: this is normal

- The racing wheel’s LED is off: this is normal

- The racing wheel is not detected in the Control Panel: this is normal

3) Launch the firmware updating app on your PC:

- Click in the Windows search magnifying glass field (located on your PC’s

taskbar), type Firmware Update and then click to launch the app

4) Thrustmaster –Firmware Updater window appears onscreen

- Device displays the name [BOOT] T248…- Ver. :....

- Firmware displays the firmware version that will be applied to the device

[BOOT] T248X - Ver.: 2.03

Ver.: 2.03 –29/03/2023 - T248X_S32L452-v2_03.tmf

Note: If nothing is displayed in the Device or Firmware sections, repeat the

entire procedure from the beginning —but this time connecting the USB

connector to another USB port on your computer (or perform the procedure on

a different computer).

Click OK to carry out the firmware update

IMPORTANT: DO NOT DISCONNECT your racing wheel from the USB port on

the PC without being prompted to do so, and DO NOT UNPLUG the racing

wheel’s power supply during the firmware update!

Wait until the Firmware loading is complete: the 2. DFU Firmware bar must be

completely green.

Next, as prompted by the message indicated by the Firmware Updater,

disconnect and then reconnect the racing wheel’s USB connector in order to

validate the procedure

The firmware updating app will then let you know whether the procedure has been

successful.

The racing wheel self-calibrates (automatic movements of the wheel rim from left to

right), and its LED lights up again

Note: In the event that this procedure fails, repeat the entire procedure from the

beginning —but this time connecting the USB connector to another USB port

on your computer (or perform the procedure on a different computer).

If the problem persists, please contact our technical support team: they will

provide you with other solutions.

5) Click OK to return to the firmware updating app’s main window, then close the app

by clicking X

6) Once the firmware update is complete, make sure that the racing wheel functions

properly in the Control Panel:

➢On your keyboard, simultaneously press the Windows and Rkeys.

➢The Run window opens: type joy.cpl and then click OK

➢The Game Controllers window opens: select your product’s name, and

then click Properties

✓The T248 appears with the name Thrustmaster Advanced

Mode Racer

You can now test your product in the Control Panel

You are now ready to play!

Firmware: 2.03

Package: 3.TTRS.2023

Méthode de réveil (Bootloader) : procédure pour réveiller votre volant

T248 (Xbox One/XBox Series/PC) s’il ne s’allume pas du tout et n’est

pas reconnu, détecté, par votre PC, Xbox One™, Xbox Series X™, Xbox

Series S™(en cas de perte de firmware)

Attention :

La procédure de réveil s'applique uniquement dans le cas précis où la base du volant

ne s'allume pas :

- Le volant ne calibre pas (mouvement automatique de la roue de droite à

gauche)

- aucun voyant ne s'allume sur la servo base

Système requis : PC avec Windows® 10 ou supérieur.

Points à vérifier avant de commencer :

- Le connecteur d'alimentation doit être correctement inséré à l'arrière de

la base du volant

- La prise de courant doit être directement branchée à une prise murale

- Nous recommandons d'éviter l'utilisation de rallonge, de multiprise ou

de transformateur de courant

- Le volant doit être directement connecté à un port USB du PC

oNous recommandons d'éviter l'utilisation de HUB USB, de rallonge

USB et toute extension de branchement

1) Assurez-vous d’avoir installé sur votre PC le dernier pilote PC - DRIVERS FORCE

FEEDBACK. Si nécessaire vous trouverez le pilote de votre appareil sur notre site,

dans la section Pilotes :

https://support.thrustmaster.com/product/t248x/

Redémarrez l’ordinateur pour finaliser la mise à jour.

Durant cette procédure :

- NE CONNECTEZ PAS le volant à votre PC avant d’être invité à le faire.

- Le volant doit être connecté directement au port USB de l’ordinateur. Nous

déconseillons l’utilisation d’un hub USB ou d’une rallonge USB pour cette

procédure.

Altri manuali per T248

Indice

Lingue:

Altri manuali Thrustmaster Controller per videogiochi

Thrustmaster

Thrustmaster T300 RS Manuale utente

Thrustmaster

Thrustmaster TMX Force Feedback Manuale utente

Thrustmaster

Thrustmaster universal challenge Istruzioni per l’uso

Thrustmaster

Thrustmaster FERRARI 488 GT3 WHEEL ADD-ON Manuale utente

Thrustmaster

Thrustmaster T.Flight Hotas One Manuale di istruzioni

Thrustmaster

Thrustmaster TX Leather Edition Manuale utente

Thrustmaster

Thrustmaster FERRARI MOTORS Manuale utente

Thrustmaster

Thrustmaster T248 Manuale utente

Thrustmaster

Thrustmaster ADVANCE WIRELESS DUAL TRIGGER Manuale utente

Thrustmaster

Thrustmaster T-WIRELESS NW Manuale utente

Thrustmaster

Thrustmaster Red Legend Edition Manuale utente

Thrustmaster

Thrustmaster T Flight Stick X Manuale utente

Thrustmaster

Thrustmaster Ferrari GTE Wheel Add-On Manuale utente

Thrustmaster

Thrustmaster T.FLIGHT STICK X Manuale utente

Thrustmaster

Thrustmaster SIMTASK FARMSTICK Manuale utente

Thrustmaster

Thrustmaster FireStorm Istruzioni per l’uso

Thrustmaster

Thrustmaster TS-PC Racer Ferrari 488 Challenge Edition Manuale utente

Thrustmaster

Thrustmaster Ferrari GT Experience Manuale utente

Thrustmaster

Thrustmaster T.FLIGHT STICK X Manuale utente

Thrustmaster

Thrustmaster Ferrari 458 Italia TX Manuale utente

Thrustmaster

Thrustmaster FORZA MOTORSPORT 5 Manuale utente

Thrustmaster

Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1 Manuale utente

Thrustmaster

Thrustmaster eSwap Pro Manuale utente

Thrustmaster

Thrustmaster eSwap X Pro Manuale utente

Manuali Controller per videogiochi popolari di altre marche

Wasp

Wasp SL-6610 Manuale utente

JKG

JKG JKG2022A Manuale utente

Marvo

Marvo MG08 Manuale utente

Belkin

Belkin F8GBPC001 Manuale utente

GameSir

GameSir Z2 Manuale utente

Laser

Laser PCO-AGAMEC-BK Manuale utente

Cortex

Cortex VEXnet Manuale utente

Gioteck

Gioteck HF-1 Manuale utente

Nacon

Nacon DAIJA ARCADE STICK Manuale utente

SHAKS

SHAKS S1+ Manuale utente

YCCTEAM

YCCTEAM Joy Con Manuale utente

Hyperkin

Hyperkin Smartboy Manuale utente

Nerf

Nerf DuraGrip Manuale utente

MoveMaster

MoveMaster MoveMaster Manuale utente

WinWing

WinWing Super Libra J1 Manuale utente

ECCI

ECCI Trackstar 6000 Series Manuale utente

Logitech

Logitech 963291-0403 - Attack 3 Joystick Manuale utente

Pelican

Pelican Afterglow PL-678 Manuale utente