THRUSTME KICKER Manuale utente
INSTRUCTION MANUAL
thrustme.no
K I C K E R
1
2
LANGUAGE
Page 3-24 English
Page 25-47 Norwegian
Page : 48-70 German
Warnings and advisories at the end of each language.
Advarsler og veiledning står på slutten av hvert språk.
Warnungen und Anleitungen befinden sich am Ende jeder
Sprache.
We recommend that you write down the
serial number in this manual for future
reference.
Serial Number: K_ _ _ - _ _ _ _-_ _ _ _
This example will be written K008-2022-0217
Sticker located here
EN
After use in seawater, run the thruster in a bucket with freshwater for
a short while, also clean all parts with fresh water to prolong the life
of the components.
ALWAYS REMOVE the magnetic kill switch
when not using the Kicker. This is to
prevent an unintentional start-up.
3
Recommended action before use
EN
Important information:
•Before every use check that the propeller is rotating freely
and not stuck. Make sure the magnetic kill switch is not
attached to avoid unintended startup.
If the propeller is stuck, please contact your nearest dealer.
DO NOT try to force the motor to run, forcing it to run may
cause fire in the motor.
•The unit is fully charged (to ensure max endurance).
•Display :
Problem: If the display don’t have the correct % on the
indication (or the % changes rapidly), the chip in the
battery that communicates with the display are not aligned
with the display.
Solution: To reset this issue, run the motor until the
battery is empty and fully charge the motor again (you may
need to do this 2-4 times to get the correct alignment).
This issue is most common on new motors or motors that
have not been used for a long period of time .
•Make sure you have read and understood the instruction
manual before using the motor.
TABLE OF CONTENTS
What's in the box
How things work
How to charge and store the batteries
Maintenance and service
Recycle and disposal
Spare parts and extras
Find your icon on the pages to learn more
Warranty
Warnings
EN
Mounting the motor
First time Charging the Kicker and Remote
4
ADDITIONAL EQUPMENT
Fast charger
INPUT : 100 -240 VAC
OUTPUT : 21V/ 10 A
Charge time internal battery 1,5 hour
EN
12V Charger for Car/ Boat
INPUT : 12V - 48V DC/ 5A /50W
OUTPUT : 21V/ 2 A
Charge time internal battery 6 hour`s
Please contact your local dealer or visit our webpage for
ordering the products.
www.thrustme.no
Velcro
To minimize lateral movement from the Kicker
Universal ThrustME tool
Tool for tightening screws or change worn parts
Propeller knife
Cuts seaweed, fishing line and other things that
might get caught in the propeller
5
INCLUDED
Wristband for remote X1
Magnetic kill switch X1
KICKER charger 110-240V X1
KICKER remote X1
EN
KICKER safety cord X1
KICKER motor X1
KICKER bag X1
6
QUICK GUIDE
EN
For first time use –please do the following steps.
Connect the charger to the Kicker
Attach the kill switch
Verify that the
display is ON
Insert the remote in the charging slot located under
the display to charge the remote
(kill switch) needs to be installed to charge the
remote.
NOTE : The remote control can also be charged on
a regular induction plate used on newer cell
phones.
After 20 minutes remove the kill switch
Leave the KICKER to be charged.
Red-light on charger indicates charging
Green-light: Charging complete
If the display is showing 100%, please continue charging until
you have green light on the charger.
ENJOY YOUR KICKER 7
NOTE: This endurance chart is only a guideline; endurance may vary
depending on weather, weight of cargo and persons onboard,
temperature, wind and type or size of watercraft used.
EN
8
DISPLAY FUNCTIONS
1. External battery status when connected
2. Indicator for reverse thrust
3. Indicator for stop ( the motor is not running )
4. Indicator for forward thrust
5. Battery indicator (ex. showing 48% remaining of the internal battery)
6. Remote connected
7. Internal battery charging
The KICKER is protected with an automatic circuit breaker and temperature sensors. If
the motor stops while running, it needs to be reset. Before resetting check that the
propeller is free for seaweed or other objects. If the battery temperature is too high,
the KICKER needs time to cool down.
Remove kill switch and re-connect for system reset.
ENDURANCE CHART
STEP 6 is a «Boost mode». when this is engaged endurance time will decrease rapidly
23
1
4
5
6
7
1. Hole for wrist band
2. Reverse thrust (one push = one step)
3. Stop
4. Forward thrust (one push = one step)
5. Charging and indicator light, pulses while charging
To change direction you always need to push the stop button first.
NOTE: The remote vibrates when a button is pushed
NOTE: Remote is equipped with 2,4 GHz system transmitting with only 1mV, so the
range is limited to approx. 75m.
REMOTE FUNCTIONS
When new, the remote is paired from the factory.
The remote has a unique address and only one remote can control one system. If
the remote is lost or not connected to the system,
pairing is needed. See instructions on next page.
EN
Remote (removable)
5
4
3
2
1
9
Press and hold reverse button after pressing the
button you feel the vibration from the remote
Press and HOLD the revers button for more than
5 seconds and continue holding the reverse for
the next step .
Continue to hold reverse.
press and hold forward button in more than 5
seconds and continue holding for next step
Release reverse button and continue holding the forward
button in more than 5 seconds
Wait until the blue light starts to flash, then release to
forward button. Release forward button.
Attach kill switch and the system will boot up
and display will now light up
The remote will pair automatically
Steady blue light after remote is paired and ready.
EN
REMOTE FUNCTIONS –PAIRING
Read through all steps before you start the paring mode
The system needs to be turned off for the
pairing mode (kill switch removed).
(Kill switch needs to be in easily accessible to be used in
the last part of the pairing mode.)
x
FOLLOW THE 5 STEPS TO START THE PARING MODE AFTER THE KILL SWITCH IS REMOVED
Forward button
Revers button
If the operation is not successful, please try again.
1
2
3
4
5
10
Altri manuali per KICKER
2
Altri manuali THRUSTME Motore fuoribordo
