Thundercomm TurboX C865 Manuale utente
Thundercomm TurboX C865 Development Kit
Quick Start Guide
Rev. V1.0
DN: tc-a-2110
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Package List
C865 SOM
Main IO Board
Navigation Mezzanine Board
12V/2.5A AC Power Adaptor
Main Camera IMX577 Module Kit
Tracking Camera OV9282 Module Kit
Speaker (x2)
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Main IO Board Interface List
1. Type-A USB 3.0 connector
11. LS2 low speed connector
21. Power on button
2. User LEDs
12. LS2 low speed connector
22. USB 2.0 debug connector
3. Type-A USB 3.0 connector
13. HS2 high speed connector
23. Force USB connector
4. BT/Wi-Fi LEDs
14. NA
24. Wi-Fi Ch1 on-board antenna
5. Type-C USB 3.1 connector
15. DC jack
25. Wi-Fi Ch1 RF receptacle
6. HS1 high speed connector
16. Micro SD card slot
26. GAN connector
7. HS3 High Speed connector
17. Dip Switch#1
27. B2B connector for C865 SOM
8. HDMI connector
18. Dip Switch#2
28. Wi-Fi Ch0 RF receptacle
9. Ethernet connector
19. Volume up button
29. Wi-Fi Ch0 on-board antenna
10. LS1 low speed connector
20. Volume down button
-
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Navigation Mezzanine Board Interface List
Figure 2-1.Navigation Mezzanine Top & Bottom View
Table 2-1. Navigation mezzanine interface list
1. GMSL1 connector
12. MIC1 sound pickup hole
23. MIC3 sound pickup hole
2. GMSL2 connector
13. Speaker connector 2
24. A+G IMU sensor
3. MIC2 sound pickup hole
14. Speaker connector 1
25. HS1 mate connector
4. Pressure sensor
15. CAM0B connector
26. HS2 mate connector
5. Compass sensor
16. MIC4 sound pickup hole
27. HS3 mate connector
6. HS1 connector *
17. CAM0A connector
28. Cam4 connector
7. HS2 connector
18. Cam1 connector
29. LS1 mate connector
8. HS3 connector
19. Cam2 connector
30. LS2 mate connector
9. LS3 connector
20. DIP switch 2
31. LS3 mate connector
10. LS2 connector
21. DIP switch 1
32. Display connector
11. LS3 connector
22. CAM3 connector
33. CAM5 connector
* LS/HS mate connectors on navigation mezzanine goes to main IO LS/HS connectors
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Let’s Get Started
Follow the steps below to boot up your device.
1. Remove C865 DK board carefully from the package.
2. Connect the power adapter to the board via DC jack (connector 15 on
Main IO Board).
3. Connect the board assembly to a computer via
Type-C USB 3.1 connector (connector 5 on Main IO Board) if adb tool is
needed.
USB 2.0 debug connector (connector 22 on Main IO Board) if debug
function is needed.
4. Press Power on button (connector 21 on Main IO Board) for three seconds
to boot up the device.
Contact us
Email: servic[email protected]
Address: 1601 McCarthy Blvd Suite R-12 Milpitas CA,95035
Support software and documentation downloads: www.thundercomm.com
Notices and trademarks
Thundercomm may have patents or pending patent programs covering subject matter described in this document.
The furnishing of this document does not give you any license to these patents. You can send license inquiries to
service@thundercomm.com.
THUNDERCOMM PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties
in certain transactions; therefore, this statement may not apply to you.
Changes are made periodically to the information herein; these changes will be incorporated in new editions of the
publication. To provide better service, Thundercomm reserves the right to improve and/or modify the products and
software programs described in the manuals, and the content of the manual, at any time without additional notice.
The software interface and function and hardware configuration described in the manuals included with your
development board or system on module might not match exactly the actual configuration of that you have
purchased. For the configuration of the product, refer to the related contract (if any) or product packing list, or
consult the distributor for the product sales. Thundercomm may use or distribute any of the information you supply
in any way it believes appropriate without incurring any obligation to you.
The products described in this document are not intended for use in implantation or other life support applications
where malfunction may result in injury or death to persons. The information contained in this document does not
affect or change Thundercomm product specifications or warranties. Nothing in this document shall operate as an
express or implied license or indemnity under the intellectual property rights of Thundercomm or third parties. All
information contained in this document was obtained in specific environments and is presented as an illustration.
The result obtained in other operating environments may vary.
The information of this document should not be as any invitation for offer or any advice to the visitors. Please consult
the professional comments from the sales consultant prior to do any actions of investment or purchase.
Thundercomm may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Any references in this publication to non-Thundercomm Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the
materials for this Thundercomm product, and use of those Web sites is at your own risk. Thundercomm shall not be
responsible for the content of the third party.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained
in other operating environments may vary significantly. Some measurements may have been made on development-
level systems and there is no guarantee that these measurements will be the same on generally available systems.
Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users
of this document should verify the applicable data for their specific environment.
This document is copyrighted by Thundercomm and the property right of the date mentioned in this document,
including but not limited trademarks, patents, copyrights, trade name etc. is/are not covered by any open-source
license. Thundercomm may update this document at any time without notice.
Anyone doesn’t have the right to amend, reprint, republication, reproduce, transmit, distribute or any other way to
use this document in business or public purpose without the prior written consent by Thundercomm.
E-mail messages sent to Thundercomm via the Internet are not guaranteed to be completely secure. Thundercomm
shall not be liable for any loss incurred by the surfer when transmitting any information over the Internet or for any
loss incurred by Thundercomm when sending any information over the Internet at your request.
Thundercomm has all rights under other relevant exemptions provided by laws and regulations, and Thundercomm's
failure to claim or delay in claiming such rights shall not be deemed to be a waiver of such rights by Thundercomm.
Thundercomm reserves the right of final interpretation of this document.
Thundercomm, Thundercomm Turbox, TURBOX, Thundersoft turbox are trademarks of Thundercomm Corporation
or its associate companies in China and/or other countries. All other trademarks are the property of their respective
owners.
Indice
Altri manuali Thundercomm Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
