3
•Using the controller in the proximity (within 30 cm [1.0 ft]) of other rings, metallic objects or
magnetic materials, near electronic devices that employ wireless communication or run on
motors, inside a steel- framed building, or within the inuence of a utility pole or a wireless station
may affect the detection range of the controller and controllability of the drone.
•In particular, a high density of Wi-Fi APs may disturb communications between the drone and
application. Before using the application, check your Wi-Fi environment.
•When the drone is ying over a dark (below 300 lux) or extremely bright (over 100,000 lux) surface,
or toward a bright light source, its ight performance may be affected. Check the surrounding
brightness before operating the drone.
Precautions on Managing Drone and Controller Batteries
•Always use genuine SHIFT LiPo batteries.
•Inspect batteries before charging or use.
•If a battery has been shocked, or if you notice abnormal smell, heat, discoloration, deformation, or
signs of leakage from it, never charge or use the defective battery.
•Do not modify or disassemble the battery wiring.
•Do not touch battery terminals with a pointed tool such as tweezers or a needle. This may
damage the battery and potentially cause a re.
•The ideal temperature range for battery charging is 5°C–45 °C (41°F–113°F). Make sure that the
battery temperature does not exceed 60°C (140°F). An overheated battery may cause serious
damage or catch re. Do not charge a battery near a heating apparatus or ammable material,
inside a vehicle, and any other area exceeding 50°C (122°F).
•Do not expose the batteries to moisture or direct sunlight.
•Keep batteries out of reach of children.
•Inserting the drone battery in the wrong direction may damage both the battery and drone.
•Exercise caution when handling the battery immediately after ight as it is heated up from
operation.
Unauthorized Disassembly Prohibited
•Unauthorized disassembly, replacement of parts, and reassembly of the SHIFT drone and
controller are strictly prohibited, except for the removal, installation, or replacement of propellers,
protectors, or batteries. this is engineering Inc. shall not be included in any legal action or held
liable for direct or indirect damage resulting from the aforementioned unauthorized changes to
the drone or controller by the user. Where an unauthorized change has been made, the product
shall not be covered by the warranty policy. Repairs may be denied or performed for a fee.
Legal Responsibility for Footage
•Unauthorized recording or distribution of footage containing other persons falls under privacy
infringement, and violators must assume legal responsibility. Prior permission must be obtained
if using the SHIFT drone to take photos or videos of other persons, and saving or distributing
such content.
•Unauthorized recording or distribution of footage containing private property falls under
trespassing, and violators must assume legal responsibility. Always obtain permission in
advance.
ⓒ 2019. this is engineering Inc. All Rights Reserved.
