Tiger Control
Operation proces
1) Sleep mode operating way:
Cooling mode: timing after enter sleep mode,when the value≥1h,setting temperature
will increase 1ºC automatically,when the value≥2h,setting temperature will increase 1ºC
again.timing value=8h,go back to the setting temperature before sleep mode.(decrease
2ºC) and exit sleep mode.
Heating mode: timing after enter sleep mode,when the value≥1h,setting temperature
will decrease 1ºC automatically,when the value≥4h,setting temperature will decrease 1ºC
again.Timing value=8h,go back to the setting temperature before sleep mode.(increase
3ºC) and exit sleep mode.
2) Auto wind mode instruction:
cooling mode: room temperature－setting temperature≥3℃,operate high speed wind.
room temperature－setting temperature=2℃, operate middle speed wind,other situations,
operate low speed wind.
heating mode: setting temperature－room temperature≥3℃,operate high speed wind.
setting temperature－room temperature=2℃, operate middle speed wind,other situations,
operate low speed wind.
When controller is off, press ④
key for more than 4 seconds can diaplay parameter,
press it shortly can enter parameter: 1.room temperature correction coefficient setting
2.upper temperature limit setting 3.lower temperature limit setting 4.memory choice of
status before power off. 5. back light display control setting 6.fan coil operating way
After modify all the parameters, press ④ key to conrm and exit parameter setting, then
go back to off status
1) Parameter 1: room temperature correction coefcient setting: (factory default is 0)
It is needed to revise and compansate room temperature because of installation position
and cross ventilation. Operating steps: enter parameter 1 setting, press ⑥or ⑤ key to set
temperature compansation value (settable compensation range: -3°C—3°C )
2) Parameter 2, 3--- upper and lower temperature limit setting
Enter parameter 2 setting, press ⑥ or ⑤ key to set upper temperature limit (the range is
20°C-35°C, default : 35°C)
Lower temperature limit setting: enter parameter 3 setting, press ⑥or ⑤key to set lower
limit temperature value. (settable temperature range is 5°C~20°C, default is 5°C )
3) parameter 4---- memory choice of status before power off. (default: rE)
Enter parameter 4 setting, press ⑥ or ⑤ key to choose rd or rE. rd is booting up without
memory, no matter what status it is before power off, it keeps off after power on.
rE is memorizing status before power off. If it is on before power off, it will keep on after
power on, it's the same in reverse.
4) parameter 5---- back light display control setting (default: 1)
Enter parameter 5 setting, press ⑥ or ⑤ key to choose 1,2 or 3. 1.backlight is on when
press keys 2.backlight is unlit 3.backlight is always on.
5) parameter 6--- fan coil operating way (default: ON)
Enter parameter 5 setting, press ⑥ or ⑤ key to choose ON or OFF. ON: fan coil is
uncontrolled. When room temperature is up to setted temperature, fan coil keep running
with the setted speed. OFF: fan coil controlled, when room temperature is up to setted
temperature, fan coil stops.
Parameter setting
8
