Timago E1 Manuale utente
1
INSTRUCTIONS FOR USE
Aluminium wheelchair
Product code: E1
1. Characteristics
The wheelchair is made of light aluminium frame reinforced with
double cross bar. Additionally upholstered backrest and seat are made
of air-permeable material. Flip-up, detachable and height adjustable
armrests are made in profiled version. The wheelchair is equipped with
quick release function allowing fast dismantling of wheels, backrest
angle adjustment, centre of gravity adjustment on the front and rear
wheels and with anti-tipping wheels. Footrests are available in a swing
away version. The wheelchair is supplied with pneumatic rear wheels
24’’ and solid rubber front wheels 8’’ in diameter.
The set includes:
•Frame
•Backrest and seat cushion
•Right footrest with footplate
•Left footrest with
footplate
•Pump
•Set of keys for
wheelchair
•assembly/dismantling
Elements of the wheelchair:
a. Hand grip
b. Transverse stabilization
c. Armrest height
adjustment
d. Backrest angle
adjustment
2
e. Locking pin of the armrest
f. Wheel lock
g. Quick release
h. Handrim
i. Assembly pin of the footrest
j. Footrest lever
k. Anti-tip wheels
l. Adjustment of the centre of gravity on the front wheels
m. Adjustment of the centre of gravity on the rear wheels
2. Application
The wheelchair is designed for people who have problems with
unassisted moving and for patients with dysfunctions and reduced
mobility. This self propelled wheelchair can also be pushed by an
accompanying person. The wheelchair is suitable for indoor and
outdoor use.
3. Assembly
UNFOLDING AND ASSEMBLY
Step 1. Unfolding the wheelchair
Place the wheelchair on the ground. Unfold the wheelchair using the
hand grips which are at the back of the backrest. Then, press the front
and rear edge of the seat so that all the elements fit together. Fasten
extended lower part of the backrest with Velcro under the seat. Press
transverse stabilization which is located at the back of the wheelchair
downwards.
Step 2. Assembly of upholstery
Fix the upholstery by putting it on the backrest and seat with Velcro
directed downwards.
Step 3. Assembly of footrests
Assemble the right and the left footrest in the front part of the frame
by placing them into the openings and turn them inwards until they are
locked.
3
Step 4. Adjustment of footrests
Adjust the right and the left footrest by twisting the screw off which is
placed at the bottom of footrests, and then push out the screw thread
on the other side. Proper space should be left between the footplates
and the ground as footplates set too low may cause difficulties in
overcoming such obstructions as curb. Adjust the footplates so that the
angle between trunk and thighs is 900 (optimum sitting position is
provided to the user, then).
Step 5. Adjustment of anti-tip wheels
In order to adjust anti-tip wheels, which are located at the back of the
wheelchair, pull the lock, move the wheels upwards or downwards,
and select appropriate height.
Step 6. Adjustment of backrest angle
To adjust the backrest angle, dismount rear wheels and place the
wheelchair on anti-tipping wheels. Twist off the screws with the use of
Allen wrench and set desired the angle (85⁰-115⁰) on both sides.
Note! It is forbidden to sit in the wheelchair while backrest angle
adjustment.
FOLDING
The wheelchair can be re-folded in order to be transported and stored
more easily.
•Swing away the footplates and set them in vertical position
(perpendicularly to the ground).
•Unfasten extended part of the backrest placed under the seat.
•Lift the transverse stabilization upwards.
•To fold the frame, pull the seat upwards by holding the front and
the back edge in the middle, so that the frame jumps out from the
connecting elements.
•If necessary, lift the anti-tipping wheels to the maximum height.
4
FLIP-UP FUNCTION OF ARMRESTS
•To flip-up the armrest, press the locking button located in the
front part of the armrest and push the armrest backwards.
•To detach the armrest, press the locking button located in the
front part of the armrest and push the armrest backwards slightly.
Then, pull the lock of the armrest located at the back of the
armrest and take out the armrest from the openings.
•To fix the armrest, put its rear part to the opening and lock it in
the front. Both locks must click.
HEIGHT ADJUSTMENT OF ARMRESTS
•To set appropriate height of the armrest, press the button located
on the outer side of the armrest.
PUMPING THE WHEELS
•The wheelchair was equipped with pneumatic rear wheels 24’’ in
diameter and swivel, PU front wheels 8’’ in diameter (tubeless
tyre). Remember to control the air pressure in both rear wheels
and check the condition of the tyres in search of abrasions, cuts
or surface depletion.
•To balance the air pressure in the wheels, twist off the cap of the
valve, insert the pump (included in the set) into the valve, and
pump the air.
WHEEL LOCKS
•To lock the wheels, push the wheel lock lever forwards until the
wheel is fully blocked (separately for left and right wheel). Please,
note that the wheel lock only serves to lock the wheels when the
wheelchair is at a complete stop.
WHEEL LOCKS ADJUSTMENT
The correct lock of the wheel lock depends on its adjustment and
position. The handle of the wheel lock should be positioned so that the
5
wheel lock shoe blocks the wheel firmly and the lever does not face
excessive resistance.
•In case of excessive resistance, pull the handle forwards slightly by
twisting off the locking screw which is located on the other side of
the wheel lock (from the inside of the wheelchair). Set the wheel
lock shoe in such position that the wheel lock blocks the wheel
easily and without resistance.
•When the wheel lock shoe does not touch or lock the wheel
sufficiently, follow the above instruction by moving the handle in
the opposite direction.
ADJUSTMENT FOR PATIENTS AFTER AMPUTATIONS IN THE LOWER
LIMBS AREA
Note! For professional adjustment, ask your retailer or other person
who has appropriate knowledge and qualifications. Do not adjust
inclination angle of the seat by yourself.
•To adjust the centre of gravity on the front wheels, unscrew fixing
screw in right and left wheel. Then, set the seat inclination by
moving fixing axis of the wheel upwards or downwards, the same
in both wheels.
•The seat inclination should be set in such a way so that the user
does not slide down from the wheelchair and can freely use
handrims.
•To adjust the centre of gravity on the rear wheels, dismount the
wheel. Then, unscrew fixing screw in right and left wheel and set
the seat inclination on the same height in both wheels.
SEAT BELT
•The belt, which is included in the standard equipment, protects
the trunk in cases when the user slides down from the wheelchair
or is not able to keep correct position independently. The belt is
fastened with the use of buckle.
6
4. Technical data
Overall width
64-68 cm
Inner width
46 cm
Overall depth
106 cm
Seat height from the
ground
50 cm
Overall height
92 cm
Seat dimensions
45 cm x 41 cm
Weight
17.5 kg
Maximum capacity
125 kg
Folded width
39 cm
Frame colour
graphite
5. Notes
Timago International Group does not bear responsibility of improper
moving in the wheelchair, failure to comply safety regulations and
misuse.
6. Cleaning and maintenance
Carry out the maintenance of the wheelchair components regularly:
•The upholstery and the cushion can be cleaned with damp (not
wet) cloth and cold or warm water, without the use of detergents.
Difficult stains can be cleaned with a sponge. Do not soak the
upholstery too much. Dry away from heat sources.
•Plastic elements should be cleaned with damp cloth possibly with
the use of appropriate detergents for plastic elements. In such
case follow the instructions given by the producer and safety
measures.
7
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained.
9. Labels
Reference
number
Manufacturer
LOT number
Manufacture date
Serial number
Medical device
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!
8
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: +48 33 499 50 00
F.: +48 33 499 50 11
E.: info@timago.com
Rev. II, date 20.05.2021
Indice
Altri manuali Timago sedia a rotelle
Timago
Timago FS 7962L Manuale utente
Timago
Timago KING-SSBA-20 Manuale utente
Timago
Timago TGR-R KP-U 3522L Manuale utente
Timago
Timago SIMPLE-TIM Manuale utente
Timago
Timago FS 654 LGC Manuale utente
Timago
Timago MASTER-TIM Manuale utente
Timago
Timago TGR-R PP 474 Manuale utente
Timago
Timago ALH 008 Manuale utente
Timago
Timago FS 692 Manuale utente
Timago
Timago T101 Manuale utente
Timago
Timago H011-B Manuale utente
Timago
Timago TGR-R WA 6700 Manuale utente
Timago
Timago TGR-R KP-U 3522 Manuale utente
Timago
Timago FS 681 Manuale utente
Timago
Timago T101 Manuale utente
Timago
Timago TGR-R WA C2600 Manuale utente
Timago
Timago Big-TIM Manuale utente
Timago
Timago FS 908LQ Manuale utente
Timago
Timago H011 Manuale utente
Timago
Timago FS 7962L Manuale utente
