TimeKeeping GUARD1 PLUS Manuale utente
Installation Guide
Systems, Incorporated
Installation Guide
Systems, Incorporated
© Copyright 2005TimeKeeping Systems, Inc. •GUARD1 PLUS and THE PIPE are trademarks of TimeKeeping Systems, Inc.
30700 Bainbridge Road • Cleveland, Ohio 44139 USA
Phone 216-595-0890 •Fax 216-595-0991
Contents
Unpack Your System 1
Connect the Downloader 3
Windows Plug and Play 4
Install GUARD1 PLUS Software 5
GUARD1 PLUS Quick Tour 6
Set Up Your Hardware in GUARD1 PLUS 12
Add Clients or Facilities 13
Set Up Your Buttons 15
Read Download Data 18
View or Print Your Data 19
Where to go from here... 22
Installation Guide Contents ••i
GUARD1 PLUS Installation Guide
This Installation Guide shows you how to install your equipment and software. It shows you how
to get started using G
UARD
1 P
LUS
.
This guide is only an overview, to enable you to get started quickly with G
UARD
1 P
LUS
. Detailed
information about all of G
UARD
1 P
LUS
's many features can be found in the online documentation
in G
UARD
1 P
LUS
Help.
1Unpack Your System
Remove the contents from the box and confirm that you have received every-
thing. The standard system (part number G1PLUS-COMPLETE) includes the
following components:
Part Number Description
G1PLUS-PROG-CD
G
UARD
1P
LUS
Program on CD-ROM
G1PLUS-SETUP Quick Set Up Card (Qty 10)
G1PLUS-GUIDE Installation Guide (this manual)
PIPE-TKS THE PIPE Touch Button Reader
PIPE-HOLSTER Nylon Belt Holster for THE PIPE
Installation Guide Unpack Your System ••1
DL-DIRECT-PNP Direct Downloader with Power Adapter
CBL-DL-PNP-PC Serial Cable for Direct Downloader
SW-28A6300-101 Driver Disk for Direct Downloader
PIPE-BUTTON-F5 Touch Memory Buttons (Qty 100)
PIPE-DOT Adhesive Foam Disks (Qty 100)
PIPE-F5-MOUNT Plastic Wall-Mount Button Holder
(Qty 100)
PIPE-SCREW-PH Phillips Head Drywall Screws
(2 Packages of 55)
PIPE-WALLET Leather Button Wallet
PIPE-KEYRING Keyring Button Holder (Qty 2)
PIPE-BTN-COVER Cover for Wall Mount Button Holder
(Qty 4)
2 ••Unpack Your System Installation Guide
TEST
DATA
POWER
2Connect the Downloader
1. Turn off your computer.
2. Position the downloader near your computer.
3. Find the serial port on the back of your computer. Most computers have
9-pin serial ports. Your port probably looks like this:
4. Connect the downloader cable (part number CBL-DL-PNP-PC) to your
serial port.
5. Connect the other end of the downloader cable to your Direct Downloader.
6. Connect the power adapter to the downloader and plug it into a convenient
electrical outlet. The power and test LEDs should be lit:
Installation Guide Connect the Downloader ••3
POWER
DATA
TEST
POWER
3Windows Plug and Play
1. Turn on your computer.
2. After Windows starts, you should see a message indicating that Windows has
found a new hardware device. Windows will start the Add New Hardware
Wizard. Follow the instructions on your screen. (Note: Different versions of
Windows do this differently.)
3. If Windows does not automatically recognize the Downloader, click Start |
Settings | Control Panel | Add New Hardware, and follow the steps in the Add
New Hardware Wizard.
4. If Windows asks for a disk, use the Direct Downloader Driver Disk (floppy disk)
provided with your system.
4 ••Windows Plug and Play Installation Guide
4Install GUARD1 PLUS Software
1. Before installing G
UARD
1 P
LUS
, make a note of the six-character Product
Code. The product code can be found on the disc or disc package.
2. Insert the G
UARD
1 P
LUS
CD-ROM in your computer.
3. The installation program should start automatically. If it does not, click Start |
Run, then enter D:SETUP (be sure to use the correct letter if your CD drive is
not drive D:).
4. After the installation wizard starts, follow the instructions on the screen. After
completing the installation, the wizard may need to reboot your computer.
5. When installation is complete, you are ready to run G
UARD
1 P
LUS
. To start
G
UARD
1 P
LUS
, double click on the G
UARD
1 P
LUS
icon on your desktop, or
select Start | Programs | Guard1 Plus | Guard1 Plus.
G
UARD
1 P
LUS
is enabled for thirty days after it is installed. To enable
G
UARD
1 P
LUS
after thirty days, you must obtain an activation number from
TimeKeeping Systems. Detailed information about activation can be found in
G
UARD
1 P
LUS
help.
Installation Guide Install GUARD1 PLUS Software ••5
5GUARD1 PLUS Quick Tour
Here are some highlights of G
UARD
1 P
LUS
. More detailed information is found in
the online documentation in G
UARD
1 P
LUS
Help.
6 ••GUARD1 PLUS Quick Tour Installation Guide
Click here to learn more
about the Welcome
Screen and software acti-
vation process.
Click here to start
GUARD1 PLUS.
If this button is
disabled (“grayed
out”) click the Help
button for activation
instructions.
Click here to activate (purchase)
one or more software modules.
When you start GUARD1 PLUS, the Welcome Screen appears. It shows the status of
your 30-day trial, registration status, if you have purchased any modules (compo-
nents) and the status of your technical support subscription.
Installation Guide GUARD1 PLUS Quick Tour ••7
The Tip of The Day window offers helpful information and tips
about using the GUARD1 PLUS.
GUARD1 PLUS's main screen is organized into two sections. Tabs on the left side provide
easy access to your information. Tabs on the right side provide detailed information about spe-
cific items.
Indice
