TimeTools T300 Manuale

T300 T550 NTP Network Time Server

Hardware Installation Guide

Models Covered: T300, T550

Do ument Number: T1201-04

18 November 2020

The latest version of this user guide an be obtained from TimeToolsLtd. om

T300 T550 Hardware Installation Guide. Page 2

Revision History

Date Do . Rev. Changes

27-Jan-17

01-Apr-19

09-Sep-20

18-Nov-20

T1201-01

T1201-02

T1201-03

T1201-04

Initial release.

TimeTools Limited postal address hange.

Updated EC De laration Of Conformity.

Updated warranty terms.

Added validation of reliable earthing aution.

Updated EC De laration Of Conformity.

T300 T550 Hardware Installation Guide. Page 3

Important Safety Information:

Important Safety Information - Read the safety instructions before using this product.

1. Please read the manuals and retain for future referen e. Please follow all instru tions and heed all warnings.

2. Do not use this apparatus near water.

3. Clean only with dry loth.

4. Install in a ordan e with the manufa turer’s instru tions.

5. Do not install near any heat sour es su h as radiators, heat registers, or other apparatus (in luding amplifiers)

that produ e heat.

6. Prote t the power ord from being walked on or pin hed parti ularly at plugs, onvenien e re epta les, and the

point where they exit from the apparatus.

7. Only use atta hments as spe ified by the manufa turer.

8. The unit has no user servi eable parts inside. Refer all servi ing to qualified servi e personnel. Servi ing is

required when the apparatus has been damaged in any way, su h as power-supply ord or plug is damaged, liquid

has been spilled or obje ts have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

9. Use the mains plug to dis onne t the apparatus from the AC mains. The mains plug shall remain easily

a essible.

10. To ompletely dis onne t unit power from the AC mains, dis onne t the unit’s power ord from the mains so ket.

To re onne t power, plug the unit’s power ord into the mains so ket following all safety instru tions and guidelines.

11. Never push obje ts of any kind into this produ t through abinet apertures as they may tou h dangerous voltage

points or short out parts that ould result in fire or ele tri sho k.

For PERMA E TLY CO ECTED EQUIPME T, a readily accessible disconnect device shall be incorporated

external to the equipment.

For PLUGGABLE EQUIPME T, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

Verification of the protective earthing connection of the socket-outlet by a skilled person is required for the

safe use of the product.

T300 T550 Hardware Installation Guide. Page 4

CAUTIO :

Before installing and onfiguring any T-Series NTP server

applian e, please read the manuals and retain for future referen e.

Please follow all instru tions and heed all warnings.

Full produ t do umentation an be found at TimeToolsLtd. om.

While reasonable efforts have been taken in the preparation of this document to ensure its accuracy, TimeTools Limited

assumes no liability resulting from any errors or omissions in this manual, or from the use of the information contained

herein.

All claims based on information publicly available at time of printing.

All product or service names mentioned in this document are trademarks of the companies with which they are

associated.

T300 T550 Hardware Installation Guide. Page 5

Table of Contents

1. Introduction................................................................................................................................................ 6

2. Key Features.............................................................................................................................................. 6

3. Scope of Supply......................................................................................................................................... 7

3.1. Optional Extras........................................................................................................................................................ 7

4. Front Panel ................................................................................................................................................ 8

4.1. LCD Display............................................................................................................................................................. 8

4.2. Alarm Indi ator......................................................................................................................................................... 8

4.3. USB Port.................................................................................................................................................................. 8

5. Rear Panel.................................................................................................................................................. 9

5.1. Power Inlet............................................................................................................................................................... 9

5.2. Ethernet Ports.......................................................................................................................................................... 9

5.3. Console................................................................................................................................................................... 9

5.4. GPS/GNSS Antenna Conne tion............................................................................................................................9

6. Installation................................................................................................................................................ 11

6.1. Lo ating the T300 T550......................................................................................................................................... 11

6.2. Antenna Conne tion.............................................................................................................................................. 11

6.3. Conne ting Ethernet.............................................................................................................................................. 11

6.4. Conne ting RS232 Serial Console Cable..............................................................................................................12

6.5. Applying Power...................................................................................................................................................... 12

7. Configuration........................................................................................................................................... 13

8. Certification and Compliance................................................................................................................. 14

8.1. RoHS Complian e Statement................................................................................................................................ 14

8.2. REACH Regulation (EC) No 1907/2006................................................................................................................14

8.3. Environmental Poli y............................................................................................................................................. 14

8.4. EC De laration Of Conformity...............................................................................................................................14

9. Warranty................................................................................................................................................... 16

T300 T550 Hardware Installation Guide. Page 6

1. Introduction

Network Time Proto ol (NTP) an be used to syn hronize the time on network lients, a ross an IP network, to the

orre t time of an NTP time server. TimeTools NTP Servers provide a stratum 1 NTP Time Server for ensuring the time is

orre t a ross an entire network.

The Network Time Server a quires time from the satellite onstellation and distributes time a ross a network using the

TCP/IP Network Time Proto ol (NTP).

2. Key Features

Model T300: 16- hannel, high sensitivity GPS timing re eiver.

Model T550: 32- hannel, multi- onstellation timing re eiver providing re eption of GPS, GLONASS, BeiDou and is

Galileo ready*1.

Timing re eiver syn hronises to less than 15 nanose onds (GPS Lo ked).

Can operate with outdoor, indoor or window lo ated antenna, saving on abling osts.

T550: Integrated high-stability TCXO os illator provides holdover during loss of signal lo k.

NTP a urate to less than 3 mi rose ond (3x10-6 se onds) UTC (GPS Lo ked).

Syn hronize in ex ess of 100,000 lients.

Model T300: Single 10/100 Mbit auto-sensing, auto-MDIX Ethernet ports.

Model T550: Dual 10/100 Mbit auto-sensing, auto-MDIX Ethernet ports.

IPv4 and IPv6 Internet Proto ol.

Integrated universal AC mains input PSU for world-wide operation.

Made in UK.

*1 Hardware ready: a firmware update is required to enable the

Galileo onstellation.

T300 T550 Hardware Installation Guide. Page 7

3. Scope of Supply

TimeTools T300 T550 shipment typi ally in ludes the following omponents:

T300 Models:

T300 NTP Time Server Applian e.

T-3040 GPS Antenna.

T550 Models:

T550 NTP Time Server Applian e.

T-3740 GNSS Antenna.

T300 and T550 Models:

MT4-GPS Antenna Mount.

TCX-030 30m (100 ft) RG58 Cable.

IEC Power Lead.

RS232 Serial Console Lead.

Qui k Start Guide.

CD ontaining user-guide, installation guide and white-papers.

3.1. Optional Extras

TCX-010 10m RG58 Cable.

TCX-030 30m RG58 Cable.

TCX-050 50m LMR195 Equivalent Cable.

TCX-100 100m LMR400 Equivalent Cable.

Custom able lengths available on request.

SPP-GPS Multi-strike maintenan e-free surge suppressor

T-AD200-8 GPS Amplifier – 20db

GPS over opti al fibre systems.

GPS Splitters – 2 to 32 way, ompa t or ra k-mount.

Digital NTP Wall lo ks.

Analog NTP Wall lo ks.

T300 T550 Hardware Installation Guide. Page 8

4. Front Panel

The T300 T550 models have the following front panel indi ators/ onne tors: LCD Display, Alarm, USB.

4.1. LCD Display

The T300 T550 are fitted with two line by 40 hara ter ultra-bright ba klit LCD displays for providing status and

onfiguration information to the user. The display typi ally shows urrent time, system time offset ompared to referen e

lo k, NTP status, GPS status and number of satellites urrently in use.

4.2. Alarm Indicator

A red / green bi- olour LED on the T300 T550 front panel indi ates status and fault onditions.

4.3. USB Port

A USB port is provided for onvenient and easy installation of firmware updates. Standard USB flash memory devi es

an be used for firmware updates.

T300 T550 Hardware Installation Guide. Page 9

5. Rear Panel

The rear panel of the T300 T550 models have the following onne tors: Power, Eth0, Eth1 (T550 only) , Antenna,

Console.

5.1. Power Inlet

Power to the applian e is applied via the double-fused IEC power entry inlet. The applian e a epts 100-240 VAC, 50-

60Hz 0.1A. Fuse spe ifi ation is two T 0.315A LBC 250V fuses.

5.2. Ethernet Ports

The T300 models have a single RJ45 10/100 MBit auto-sensing, auto-MDIX Ethernet port labelled Eth0.

The T550 models have dual RJ45 10/100 Mbit auto-sensing, auto-MDIX Ethernet ports labelled Eth0 and Eth1.

Link: 10/100 Mbit, auto-sensing, auto-MDIX

Conne tor: RJ45

Cable Type: CAT 5.0

Modes: Half/Full Auto-negotiation.

5.3. Console

The Console port is a 9-way D-type female RS232 serial onne tion for devi e onfiguration using dumb terminal

emulator. Null modem able supplied for onne tion to standard 9-way PC serial interfa e.

RS232 Console port pin-outs:

Pin 2: RX

Pin 3: TX

Pin 5: GND

The applian e has a se ondary serial port for optional serial time ode output. It is ombined into the same 9-way D-type

onne tor as the onsole port. A ustom serial able is required to utilise the se ondary serial port.

Se ondary RS232 Serial Port pin-outs:

Pin 7: TXB

Pin 8 : RXB

5.4. GPS/G SS Antenna Connection

The GPS/GNSS antenna onne tor is a 50 ohm TNC female onne tor. It a epts a oax able to a 5V GPS/GNSS

antenna. Use only the antenna and able supplied by TimeTools with the T300 T550.

T300 T550 Hardware Installation Guide. Page 10

Conne tor: TNC female, 50 ohm

Cable: Coax, 50 ohm

Antenna Output Voltage: 5VDC

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TimeTools Server di riferimento orario di rete

TimeTools

TimeTools T Series Manuale utente

Manuali Server di riferimento orario di rete popolari di altre marche

EKOS

EKOS EKOSync 1588 Manuale utente

Meinberg

Meinberg LANTIME M200/GPS Manuale per l'uso e la cura

Meinberg

Meinberg LANTIME M600 Manuale per l'uso e la cura

Meinberg

Meinberg LANTIME M300/MRS/AD10-AD10 Manuale per l'uso e la cura

TPA

TPA S5 Manuale utente

Meinberg

Meinberg LANTIME M300/GPS/2LNE/AD10-AD10 Manuale per l'uso e la cura

Gorgy Timing

Gorgy Timing LEDI NETWORK iTS Manuale utente

Mobatime

Mobatime DTS 4160.grandmaster Manuale utente

Meinberg

Meinberg LANTIME M300/GNS/RPS Manuale per l'uso e la cura

Mobatime

Mobatime DTS 4128.timeserver Manuale utente

Meinberg

Meinberg IMS LANTIME M1000 Manuale utente

BRG Precision Products

BRG Precision Products NTP100B Manuale utente

Krontek

Krontek KT2000 Manuale utente

Meinberg

Meinberg LANTIME M300/TCR Manuale per l'uso e la cura

Mobatime

Mobatime NTS Manuale utente

Bodet Time

Bodet Time Sigma H Istruzioni e ricette

Bodet

Bodet NETSILON 7 AC Manuale utente

Meinberg

Meinberg LANTIME M100 Manuale utente