Timex T124 Manuale utente

Model: T124

Dual Alarm Clock

For additional information, online registration,

and exclusive special offers visit our website:

Questions? Contact Customer Service at 1-800-888-4491

SNOOZE/DIMMER

ALM RESET

Table of Contents

What’s in the Box

What’s in the Box..............................................................................................................................................................................................................1

Product Care ....................................................................................................................................................................................................................1

Controls Overview............................................................................................................................................................................................................2

Display..............................................................................................................................................................................................................................3

Installing and Replacing Backup Batteries .......................................................................................................................................................................3

Set Up ..............................................................................................................................................................................................................................4

Setting the Time ............................................................................................................................................................................................................4-5

Setting and Using Alarms ..............................................................................................................................................................................................5-6

Snooze/Dimmer/Alarm Volume ........................................................................................................................................................................................7

Battery Information ...........................................................................................................................................................................................................8

Safety Information ............................................................................................................................................................................................................9

Troubleshooting..............................................................................................................................................................................................................10

Warranty Information ...................................................................................................................................................................................................... 11

Product Care

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it

and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can

damage the surface of the unit.

This product ships with the following items. Make sure all are present.

1. T124 Alarm Clock 2. Instruction book

Controls Overview

Rear Panel

Top Panel

Alarm 2

Button

AlarmVolume

Selector Switch

Snooze/

Display Dimmer

Button

Alarm 1

Button

Minus

Button Plus

Button

Clock/Alarm Reset

Button

ALARM

LOUDSOFT

SNOOZE/DIMMER

ALM RESET

Press

21 3

Display

Installing and Replacing Backup Batteries

When lit,

indicates Alarm 1

is armed

When lit,

indicates Alarm 2

is armed

When lit,

indicates backup

battery needs replacing

When lit,

indicates time

displayed is PM

Time display

Your new Timex Alarm Clock includes a battery backup system that will maintain the time and alarm settings

during a temporary power interruption.

1. Keep unit connected to AC power when changing batteries to avoid losing your settings.

2. Press on latch to remove the battery compartment cover located on the bottom of the unit .

3. Check the correct polarity (+/ - ) markings in the battery compartment and install two “AAA”batteries (not

included).

4. Replace the battery compartment cover.

NOTE: With batteries installed, the display will turn off during a power failure but the clock will continue to

run and maintain your alarm settings. The alarm will not sound when operating on batteries during

power interruption.

Set Up

Connecting to Power Source

Plug the AC cable on the back of the unit into a working wall outlet that is not controlled by a wall switch.

The unit does not operate on batteries (the battery back up system maintains clock settings during power

failures).

Setting the Time

2 SECS

Press and hold the Clock/Alarm Reset Button until the time flashes on the display.

ALM RESET

Setting and Using Alarms

Press and hold the Alarm 1 Button until the current alarm time blinks on the display.

The Alarm 1 indicator will light.

Press and release the MINUS or PLUS Buttons to adjust the time (press and hold for rapid setting).

NOTE: The PM indicator will light when the hour is set for PM. There is no AM indicator.

This unit has two independent alarms, Alarm 1 and Alarm 2. Each is set and operates in the same way. Instructions

below show Alarm 1. Follow the same method to set Alarm 2. Alarms sound for 1 hour.

PM indicator

2 SECS

Press and release the Clock/Alarm Reset Button to complete clock setting.

ALM RESET

To silence a sounding alarm and reset it to come on the following day, press the relevant alarm button (Alarm 1

Button or Alarm 2 Button OR the Clock/Alarm Reset Button). To activate an alarm, press and release the

relevant alarm button. The alarm is armed when the indicator is lit. To disarm, press and hold the relevant alarm

button, making sure indicator is off.

PREVEWING ALARM, TURNING ALARM ON OR OFF & NEXT DAY ALARM RESET

ALM RESET

Press and release the Alarm 1 Button to complete setting Alarm 1.

Press and release the MINUS or PLUS Buttons to adjust the Alarm 1 alarm time (press and hold for rapid

setting).

NOTE: The PM indicator will light when the hour is set for PM. There is no AM indicator.

OR OR

• Press and release the Snooze/Dimmer Button when the alarm sounds to silence it for 9 minutes.

Snooze can be used several times during 1 hour alarm cycle.

• During normal operaton (alarm is NOT sounding), press and hold the Snooze/Dimmer Button to

toggle between high and low display brightness settings.

SNOOZE/DIMMER

• Slide the Alarm Volume Selector Switch on the back of the clock to SOFT or LOUD position to

adjust alarm volume for light or heavy sleepers.

ALARM VOLUME

SNOOZE/DIMMER

ALARM

LOUDSOFT

Battery Cautions and Tips

• Only use the recommended/supplied batteries or equivalent.

• Use alkaline batteries for longer life.

• Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries.

• Insert batteries with proper polarity (+/–) as indicated.

• Remove exhausted batteries from product.

• Recharge rechargeable batteries under adult supervision.

• Do not attempt to recharge non-rechargeable batteries.

• Do not open batteries or heat them beyond normal ambient temperatures.

• To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer.

• Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact

with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin contact occurs,

wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur.

• Store in cool, dry, ventilated area away from hazardous or combustible material.

• Do not dispose of batteries in the household trash or fire.

• Follow applicable laws and local regulations for the disposal and transportation of batteries.

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please

read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on

the unit.

1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that

may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.

3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area

from where the cable exits the unit to where it is plugged into an AC socket.

6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.

7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.

8. Attachments – Do not use attachments not recommended by the product manufacturer.

9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long

periods of time. This will prevent damage to the product due to lightning and power-line surges.

10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:

A. the power supply cable or plug has been damaged.

B. objects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E. the unit exhibits a marked change in performance or does not operate normally.

12. Antenna – Do not connect an external antenna to the unit (other than that provided).

13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.

14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should

be referred to qualified service personnel.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.