Timex M916 Manuale utente

TIMEX

WATCH OPERATION GUIDE

TIMEX CONFIDENTIAL PROPRIETARY INFORMATION

Quality Control

Page 1 of 2

Model No(s):

M916

Part Name:

WATCH HEAD

Doc. No./Rev.:

20170418

Prepared by:

GTajantajan/HSagun

Approved by:

Reviewed by:

ACCabasan

DGriffith

M916 Watch Operation Guide Doc. No./Rev. 20170418

1.0 PURPOSE:

1.1 To provide Customer Service Centers with procedures on how to operate and set-up the Model 916 watch.

2.0 WATCH OPERATION AND SET-UP

2.1 HOW TO START YOUR WATCH

If the watch is provided with an e-guard (small plastic inserted between case and crown), it needs to be removed by

pulling downward (perpendicular to the back of the watch case).

2.2 TIME-OF-DAY SETTING

a. Pull the Crown out to SET 2 Position (second hand will stop moving).

b. Rotate the Crown to move the HOUR and MINUTE HANDS clockwise until correct time is displayed.

Note: Be sure to observe the AM or PM hands position when passing the 12 o’clock to 1 o’clock.

If date change occurs, time is on AM and if no date change, time is on PM.

c. Push the Crown in to the ZERO Position. The SECOND HAND should resume operation after one second.

2.3 DAY SETTING

a. Pull the Crown to the SET 2 Position.

b. Rotate the Crown in either direction until the current day is displayed.

c. Day should move forward or backward depending on the Crown direction.

d. Push the Crown in to ZERO Position.

TIMEX

WATCH OPERATION GUIDE

TIMEX CONFIDENTIAL PROPRIETARY INFORMATION

Quality Control

Page 2 of 2

Model No(s):

M916

Part Name:

WATCH HEAD

Doc. No./Rev.:

20170418

Prepared by:

GTajantajan/HSagun

Approved by:

Reviewed by:

ACCabasan

DGriffith

M916 Watch Operation Guide Doc. No./Rev. 20170418

2.4 QUICK DATE SETTING

a. Pull the Crown to the SET 1 Position.

b. Rotate the Crown in either direction until current date is displayed.

c. Date numeral should increase or decrease depending on the Crown direction.

d. Push the Crown in to ZERO Position.

Note: If above date setting occurs between 10 o’clock PM and 2 o’clock AM, the date numeral adjustment should only be in

the incremental direction.

2.5 NORMAL DATE SETTING

a. Pull the Crown to the SET 2 Position.

b. Rotate the Crown in clockwise direction until current date is displayed.

c. Push the Crown to ZERO Position.

Caution:

The CROWN must be returned to the ZERO Position after TIME-OF-DAY and/or DAY/DATE setting. Wearing or

storing the watch with the CROWN left in the SET 1 position will cause damage to its date mechanism.

2.6 INDIGLO ACTIVATION

This is applicable only on watch styles with the INDIGLO feature (M916).

Note: Models with this feature usually have the word “INDIGLO” printed on the watch display area.

Due to technical limitation, there are products that will show a small unlighted area at 6 o’clock or

12’oclock location of the dial. This is not a defect.

a. Push the Crown inward. Watch display will illuminate with blue-green or blue light.

b. Releasing the Crown back to the ZERO Position will turn off the INDIGLO light.

Indice

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Casio

Casio QW-4343 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Casio

Casio 5594 Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente

iTOUCH

iTOUCH 3360 Manuale utente