Tippmann A-5TM E-GRIPTMKIT Manuale utente
TIPPMANN®
2955 Adams Center Road, Fort Wayne, IN 46803 USA
P) 260-749-6022 • F) 260-749-6619
www.tippmann.com
TP04115
Date: 09/09
SL-68 II
PAINTBALL MARKER
LANCEUR DE PAINT-BALL
MACADOR PAINTBALL
Owner’s Manual
Manuel d’utilisation
Manual del Usuario
2
E
N
G
L
I
S
H
ADVERTENCIA
ESTO NO ES UN JUGUETE. UN USO INAPROPIADO
PUEDE CAUSAR SERIAS HERIDAS O LA MUERTE.
OJOS, CARA Y OIDOS DEBEN SER PROTEGIDOS
TODO EL TIEMPO, CON LA PROTECCIÓN DISEÑADA
PARA PAINTBALL TANTO POR JUGA-DORES COMO
POR CUALQUIER PERSONA QUE ESTE EN EL RADIO
DE ALCANCE. RECOMENDAMOS AL MENOS 18 AÑOS
PARA LA COMPRA Y USO. LAS PERSONAS MENORES
DE 18 AÑOS DEBEN USAR ESTE PRODUCTO BAJO LA
SUPERVISIÓN DE UN ADULTO. LEA EL MANUAL DEL
USARIO ANTES DE USAR ESTE PRODUCTO.
WARNING
THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS
INJURY OR DEATH. EYE, FACE, AND EAR PROTECTION
DESIGNED FOR PAINTBALL MUST BE WORN BY
THE USER AND ANY PERSON WITHIN RANGE. WE
RECOMMEND YOU BE AT LEAST 18 YEARS OLD TO
PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT
SUPERVISION WHEN USING THIS PRODUCT. READ THE
OWNER’S MANUAL BEFORE USING THIS PRODUCT.
AVERTISSEMENT
CECI N’EST PAS UN JOUET. TOUT USAGE
INAPPROPRIE PEUT PROVOQUER DES BLESSURES
GRAVES OU MORTELLES. LE PORT DE LA
PROTECTION POUR LES YEUX, LE VISAGE ET LES
OREILLES CONCUE POUR LE PAINT-BALL EST
OBLIGATOIRE POUR L’UTILISATEUR AINSI QUE
POUR TOUTE PERSONNE A PORTEE DE TIR. POUR
L’ACHAT, NOUS RECOMMANDONS L’AGE DE 18 ANS.
LES PERSONNES DE MOINS DE 18 ANS DOIVENT
ETRE SOUS LA SURVEILLANCE D’UN ADULTE
LORSQU’ELLES UTILISENT CE PRODUIT. LISEZ LE
MANUEL AVANT D’UTILISER CE PRODUIT.
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
3
E
N
G
L
I
S
H
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
WARNING
SAFETY IS YOUR RESPONSIBILITY
READ AND FAMILIARIZE YOURSELF AND ANY OTHER USER
OF THIS MARKER WITH THE
SAFETY INSTRUCTIONS
IN THIS MANUAL. FOLLOW THESE INSTRUCTIONS WHEN
USING, WORKING ON, TRANSPORTING, OR
STORING THIS
MARKER.
ALWAYS KEEP THE TRIGGER SAFETY IN SAFE
MODE UNLESS FIRING AS DETAILED IN
INSTRUCTIONS ON PAGE 6.
ALWAYS KEEP THE BARREL SLEEVE
INSTALLED WHEN NOT IN A SHOOTING
SITUATION, SEE INSTRUCTIONS ON PAGE 4.
Push Safety
AVERTISSEMENT
LA SECURITE EST VOTRE RESPONSABILITE
LISEZ ET FAMILIARISEZ-VOUS AINSI QUE TOUT AUTRE
UTILISATEUR DE CE LANCEUR AVEC LES INSTRUCTIONS
DE SECURITE CONTENUES DANS CE MANUEL. SUIVEZ CES
INSTRUCTIONS LORSQUE VOUS UTILISEZ, TRAVAILLEZ
SUR, TRANSPORTEZ OU ENTREPOSEZ CE LANCEUR.
SI VOUS NE TIREZ PAS, MAINTENEZ TOUJOURS LA
SECURITE DE LA DETENTE EN MODE SECURITE
COMME INDIQUE DANS LES INSTRUCTIONS EN
PAGE 6.
GARDEZ TOUJOURS LA DOUILLE DU CANON
INSTALLEE LORSQUE VOUS N’ETES PAS EN
SITUATION DE TIR, VOIR INSTRUCTIONS EN PAGE 4.
ADVERTENCIA
LA SEGURIDAD ES SU RESPONSABILIDAD
LEA Y FAMILIARICESE USTED Y CUALQUIER OTRO
USUARIO DE ESTE MARCADOR CON LAS INSTRUCCIONES
DE SEGURIDAD DE ESTE MANUAL. SIGA ESTAS
INSTRUCCIONES CUANDO LO USE,TRABAJE EN EL,
TRANSPORTE, O ALMACENE.
MANTENGA SIEMPRE EL GATILLO EN POSICION DE
SEGURO A SIN NO VA HACER UN DISPARO COMO
LO EXPLICA LAS INSTRUCCIONES EN LA PAGINA
6.
SIEMPRE MANTENGA LA FUNDA DE
SEGURIDAD INSTALADA CUANDO NO VA
HACER DISPAROS, VER INSTRUCCIONES EN
LA PAGINA 4.
Push Safety
Push Safety
4
E
N
G
L
I
S
H
WARNING
ALWAYS KEEP THE BARREL BLOCKING DEVICE INSTALLED
EXCEPT WHEN YOUR MARKER IS IN USE. ALWAYS MAKE
SURE THAT THE TRIGGER SAFETY IS IN THE SAFE MODE (SEE
INSTRUCTIONS ON PAGE 6) AND THE BARREL BLOCKING
DEVICE IS PROPERLY INSTALLED ON YOUR MARKER
ACCORDING TO THE INSTRUCTIONS TO PREVENT DAMAGE
TO PROPERTY, SERIOUS INJURY, OR DEATH.
Barrel Sleeve Installation Instructions
1. Insert the barrel sleeve onto the barrel and loop the cord over the top of the receiver
and position at the back of the grip as shown.
2. Adjust the cord length retainer up to the back of the grip by pulling the cord through it
until the retainer is snug against the back of the grip.
Keeping the cord as tight as possible, leave just enough
cord elasticity to pull the cord/retainer up over the top of
the marker to remove the barrel sleeve for ring.
3. After the cord length is properly adjusted, lock the cord length by
tying a knot in the cord against the back of the retainer as shown.
4. Before and after playing, inspect the barrel sleeve and replace if
the sleeve or cord is damaged, or there is a loss of cord elasticity.
5. Clean the barrel sleeve with plain, warm water and store out of sunlight in a dry area
when not in use.
Barrel Sleeve
Cord Length
Retainer
WARNING
THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR
DEATH. EYE, FACE, AND EAR PROTECTION DESIGNED FOR
PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON
WITHIN RANGE. WE RECOMMEND YOU BE AT LEAST 18
YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE
ADULT SUPERVISION WHEN USING THIS PRODUCT. READ THE
OWNER’S MANUAL BEFORE USING THIS PRODUCT.
5
E
N
G
L
I
S
H
TIPPMANN®
2955 Adams Center Road, Fort Wayne, IN 46803 USA
P) 260-749-6022 • F) 260-749-6619
www.tippmann.com
CONGRATULATIONS on your purchase of your Tippmann® paintball marker. We believe our
SL-68 II™ marker to be the most accurate and durable paintball marker available, and it is
proudly manufactured in the USA. All Tippmann® SL-68 II markers will provide many years of
dependable service if cared for properly.
Please take time to read this manual thoroughly and become familiar with your Tippmann®
SL-68 II™ marker’s parts, operation, and safety precautions before you attempt to load or
re this marker. If you have a missing or broken part, or need assistance, please contact
Tippmann Consumer Relations at 1-800-533-4831 for fast, friendly service.
Table of Contents
Barrel Sleeve Installation Instructions ....................................................................................4
Warning / Liability Statement ..................................................................................................6
Safety Is Your Responsibility! ................................................................................................6
Familiarize Yourself with Safety... ...................................................................................6
Getting Started .......................................................................................................................8
Velocity Adjustment ................................................................................................................8
Unloading Your Marker ..........................................................................................................9
Air Supply Cylinder Warnings .................................................................................................9
Air Supply Cylinder Safety Tips ....................................................................................10
Air Supply Cylinder Removal ........................................................................................11
Repairing Air Supply Cylinder Leaks ...........................................................................11
Cleaning and Maintenance ...................................................................................................12
Storage .........................................................................................................................12
Field Barrel Cleaning ....................................................................................................12
Field Disassembly .......................................................................................................13
Re-assembly .................................................................................................................13
General Troubleshooting .............................................................................................16
Valve Troubleshooting .................................................................................................16
Warranty and Repair Information .........................................................................................18
Specications ......................................................................................................................19
SL-68 II Diagram and Parts List ...........................................................................................20
6
E
N
G
L
I
S
H
Warning / Liability Statement
This marker is classied as a dangerous weapon and is surrendered by Tippmann Sports,
LLC with the understanding that the purchaser assumes all liability resulting from unsafe
handling or any action that constitutes a violation of any applicable laws or regulations.
Tippmann Sports, LLC shall not be liable for personal injury, loss of property or life resulting
from the use of this weapon under any circumstances, including intentional, reckless,
negligent or accidental discharges.
All information contained in this manual is subject to change without notice. Tippmann
Sports, LLC reserves the right to make changes and improvements to products without
incurring any obligation to incorporate such improvements into products previously sold.
If you as a user do not accept liability, Tippmann Sports, LLC requests you do not use a
Tippmann Sports, LLC marker. By using this paintball marker you release Tippmann Sports,
LLC of any and all liability associated with its use.
Safety Is Your Responsibility!
Familiarize Yourself with Safety...
The ownership of this marker places upon you the total responsibility of its safe and lawful
use. You must observe the same safety precautions as you would any rearm to assure
the safety of not only yourself but everyone around you. Outlined here are some general
precautions to be aware of. The user should at all times use caution and common sense
when using this marker and always remember that the game of Paintball can only survive
and grow if it remains SAFE!
• Do not load or re this marker until you have completely read this manual and are
familiar with its safety features, mechanical operation and handling characteristics.
• Handle this and any marker as if it were loaded at all times.
• Keep your nger off the trigger until ready to shoot.
• Do not look down the barrel of a paintball marker. Accidental discharge into the
eyes may cause permanent injury or death.
• Keep the trigger safety in safe mode until ready to shoot (see Warning above).
WARNING
• EXCEPT WHEN YOUR MARKER IS IN
USE, ALWAYS MAKE SURE THAT THE
TRIGGER SAFETY IS IN SAFE MODE,
WHICH DISABLES THE TRIGGER, AND
THE BARREL SLEEVE IS INSTALLED
(SEE PAGE 4).
• TO TURN ON THE TRIGGER SAFETY
(SAFE MODE): PUSH THE SAFETY IN
AS SHOWN IN FIGURE 1.
• TO TURN TRIGGER SAFETY OFF (FIRE MODE): PUSH SAME BUTTON
ON THE OPPOSITE SIDE OF RECEIVER.
Figure 1: Trigger Safety Location
7
E
N
G
L
I
S
H
• Keep a barrel blocking device installed on marker when not shooting (see page 4).
• Never point the marker at anything you do not intend to shoot.
• Never re your marker at anything you do not intend to shoot because there may
be paintballs or foreign debris lodged in the chamber, barrel, or the marker valve.
• Do not shoot at fragile objects such as windows.
• Never re your marker at personal property of others. The paintball impact can
cause damage and the paint can stain the nish of automobiles, houses, etc.
• Always keep the barrel pointed down or in a safe direction, even if you stumble or
fall.
• Eye, face, and ear protection designed specically to stop paintballs in the form of
goggles and full face mask meeting ASTM Specication F 1776 must be worn by
the user and any person within range.
• Never shoot at a person who is not protected by eye, face, and ear protection
designed for paintball.
• Pressurize and load a marker only when the marker will be immediately used.
• Store the marker unloaded and degassed in a secure place.
NOTE: Before storing or disassembling, be sure to remove paintballs and air
supply (see Unloading Your Marker on page 9, and Air Supply Cylinder
Removal on page 11), put the trigger safety in Safe mode (see page 6) and install
the barrel blocking device (see page 4).
• Do not eld strip or otherwise disassemble this marker while it is pressurized with
air supply.
• Dress appropriately when playing the game of paintball. Avoid exposing any skin
when playing the game of paintball. Even a light layer of clothing will help absorb
some of the impact and protect you from the paintballs.
• Keep exposed skin away from escaping gas when installing or removing the air
supply cylinder, or if the marker or air supply is leaking. Compressed air and CO2
gasses are very cold and can cause frostbite under certain conditions.
• Use only .68 caliber paintballs. Never load or re any foreign objects.
• Avoid alcoholic beverages before and during the use of this marker. Handling
markers while under the inuence of drugs or alcohol is a criminal disregard for
public safety.
• Avoid shooting an opponent at point blank range, 6 feet or less.
• Familiarize yourself with instructions listed on the air supply cylinder. Contact the
air supply cylinder manufacturer with any questions.
• Always measure your marker’s velocity before playing paintball and never shoot at
velocities in excess of 300 feet per second (see instructions on page 8).
• Always keep in mind that the sport of Paintball is viewed and judged by your safe
and sportsmanlike conduct.
8
E
N
G
L
I
S
H
Getting Started
• Eye protection designed for paintball use must be worn by the user and any person
within range.
• Do not disassemble this marker while it is pressurized with air.
• Do not pressurize a partially assembled marker.
• Read each step completely before performing the steps.
NOTE: Carefully hand start all threaded parts when assembling, and do not
overtighten, as this may potentially strip the threaded parts.
1. Air Supply Cylinder Installation.
Review Air Supply Cylinder Safety Tips (see page 10).
Push the trigger safety to the Safe mode (see page 6).
Install the barrel sleeve (see page 4).
Lubricate the cylinder valve o-ring with a little marker oil, then insert the cylinder valve
end into the air supply adapter at the back end of the marker grip. Twist the cylinder
clockwise into the air supply adapter until it stops. Use caution as the marker is now
ready to re.
2. Loading the Hopper
Insert the hopper into the feed neck of the receiver. Tighten the clamp bolt to secure
the hopper, but be careful not to over tighten, as this might collapse the hopper feed
tube.
Fill the hopper with .68 caliber paintballs. Do not force excessive numbers of paintballs
into the hopper.
3. Firing
Remove the barrel sleeve from the marker. Take the marker off Safe mode by pushing
the trigger safety to the Fire position. Grip the forearm grip with one hand and the
receiver in your other hand, pull the forearm grip rearward until it runs out of travel,
then push it forward until it again runs out of travel. Point the marker in a safe direction
and pull the trigger to shoot a paintball.
Breech lock: After one pump cycle, the marker cannot be pumped again until the
trigger is pulled. This is a feature to prevent double loading paintballs.
Auto Trigger: If you hold the trigger back while cycling the forearm grip, the marker will
re each time the forearm grip is pumped.
Note: If you attempt to pump the marker with the trigger safety in Safe mode, the
forearm grip will not travel forward to complete the pump cycle.
Velocity Adjustment
Each time you play paintball, check the velocity of your
paintball marker with a chronograph (an instrument for
measuring velocity) prior to playing paintball. Verify that
the marker’s velocity is set below 300 feet per second or
less if required by the playing eld.
To adjust the marker’s velocity, use the included 3mm
allen wrench. The velocity adjustment screw is located
on the left side of the receiver, as shown in Figure 2. To
reduce the velocity, turn the screw clockwise. To increase
the velocity, turn the screw counterclockwise. Do not remove the velocity screw.
Figure 2: Velocity Adjustment
Velocity
Screw
9
E
N
G
L
I
S
H
Unloading Your Marker
1. Eye protection designed for paintball use must be worn by the user and any person
within range.
2. Empty and remove the hopper.
3. Go to a designated ring area, remove the barrel sleeve and turn off trigger safety.
4. Point your marker in a safe direction and re several times to be sure there are no
paintballs lodged in the chamber or barrel. Visually inspect the chamber for paintballs.
5. Return the trigger safety to the Safe mode (see page 6). Reinstall the barrel sleeve (see
page 4).
Air Supply Cylinder Warnings
WARNING
The brass or nickel plated cylinder valve (Figure 3, #1)
is intended to be permanently attached to the air or CO2
cylinder (2).
An air or CO2 cylinder can y off with enough force to cause
serious injury or death if the cylinder (2) unscrews from a
cylinder valve (1).
Refer to Figure 3. There have been reported incidents caused
by players unknowingly unscrewing the cylinder (2) from the
cylinder valve (1). This occurs when the player thinks the
entire valve-cylinder assembly is being unscrewed from the
air supply adaptor of the paintball marker, when in fact they
are unscrewing the cylinder from the cylinder valve.
To avoid this danger, it is recommended (if your cylinder is
not already marked) that you use paint or nail polish to place
a mark (3) on the cylinder valve, and place another mark (4)
on the cylinder, in line with the #3 mark as shown.
Whenever you turn the cylinder during removal, watch the
marks on the cylinder and the cylinder valve to be sure
that they rotate together. If at any time these marks start
to separate as shown in Figure 4, the cylinder is starting to
unscrew from the cylinder valve and you must STOP and
take the entire unit to a “C5” certied airsmith for safe removal
and/or repair.
NOTE: The cylinder valve should unscrew from the paintball
marker in about 3 or 4 full turns. If you nish the 4th full turn
and the cylinder valve is not unscrewed from the paintball
marker, STOP! Take the entire unit to a “C5” certied
airsmith for safe removal and/or repair.
Locate a “C5” Certied Airsmith at www.paintball-pti.com/
search.asp.
Figure 3: Marked Cylinder and
Valve
12
34
Figure 4: Misaligned Cylinder
and Valve
3
4
10
E
N
G
L
I
S
H
Whether you have a new or used rellable air or CO2 cylinder, you are at risk if any of the
following has occurred:
• The valve unit was replaced or altered after purchase.
• An anti-siphon device was installed.
• The valve unit was removed from the cylinder for any reason.
• Any modication was done to the rellable air or CO2 cylinder.
If any of these conditions has occurred, take your air or CO2 cylinder to a “C5” Certied
Airsmith for inspection or contact the cylinder manufacturer.
Air Supply Cylinder Safety Tips
SAFETY TIPS to ensure that your air or CO2 cylinder is safe for play:
• Improper use, lling, storage, or disposal of air or CO2 cylinder may result in
property damage, serious personal injury or death.
• Make sure that any maintenance or modication to any air or CO2 cylinder is done
by a qualied professional, such as a “C5” certied airsmith.
• The use of anti-siphon devices is not recommended. However, if one is already
installed on your air or CO2 cylinder or is desired, it is critical that your cylinder be
checked by, or the device installed by, a qualied professional.
• All air or CO2 cylinders must be lled only by properly trained personnel.
• Cylinder valves must be installed only by properly trained personnel.
• Do not overll!! Never exceed the air or CO2 cylinder’s capacity.
• Do not expose pressurized air or CO2 cylinder to temperatures exceeding 130
degrees Fahrenheit (55 degrees Celsius).
• Do not use caustic cleaners or strippers on the air or CO2 cylinder or cylinder valve
and do not expose to corrosive materials.
• Do not modify the air or CO2 cylinder in any way. Never try to disassemble the
cylinder valve from the air or CO2 cylinder.
• Any air or CO2 cylinder that has been exposed to re or heated to a temperature
of 250 degrees Fahrenheit (121 degrees Celsius) or more must be destroyed by
properly trained personnel.
• Use appropriate gas for your cylinder. Only use CO2 in a CO2 cylinder and only use
compressed air in a compressed air cylinder.
• Keep all cylinders out of the reach of children.
• The Air or CO2 cylinder should be inspected and hydrostatically retested at least
every 5 years by a DOT licensed agency.
• Keep exposed skin away from escaping gas when installing or removing air supply,
or if the marker or air supply is leaking. Compressed air and CO2 gasses are very
cold, and can cause frostbite under certain conditions.
NOTE: Locate a “C5” certied airsmith at www.paintball-pti.com/search.asp
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Tippmann Accessori per videogiochi
Tippmann
Tippmann GRYPHON Manuale utente
Tippmann
Tippmann A-5 RESPONSE Manuale utente
Tippmann
Tippmann E-TRIGGER T206002 Manuale utente
Tippmann
Tippmann X7 PHENOM Manuale utente
Tippmann
Tippmann FT-12 Manuale utente
Tippmann
Tippmann CARVER ONE Manuale utente
Tippmann
Tippmann X7 PHENOM Manuale utente
Tippmann
Tippmann A-5 RESPONSE Manuale utente
Tippmann
Tippmann Supplier Requirements Manuale utente
Tippmann
Tippmann CARVER ONE Manuale utente
Tippmann
Tippmann A-5 RESPONSE Manuale utente
Tippmann
Tippmann T201008 Manuale di installazione
Tippmann
Tippmann TPX Manuale utente
Tippmann
Tippmann TPX Manuale utente
Tippmann
Tippmann A-5 RESPONSE Manuale utente
Tippmann
Tippmann 98 CUSTOM MARKER LINE Manuale utente
Tippmann
Tippmann BRAVO ONE SERIES Manuale utente
Tippmann
Tippmann A-5 WITH E-GRIP Manuale utente
Tippmann
Tippmann 98 CUSTOM PLATINUM SERIES MARKER LINE Manuale utente
Tippmann
Tippmann A-5 SERIES Manuale utente
Manuali Accessori per videogiochi popolari di altre marche
Sega
Sega Visual Memory Unit Manuale utente
Datel
Datel Go-tcha Expedition Manuale utente
TruGolf
TruGolf TruFlight 2 Manuale utente
CH Products
CH Products CH PRO THROTTLE Manuale utente
Thrustmaster
Thrustmaster T2PA Manuale utente
Cube Controls
Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manuale utente
