TIPTEL 85 System UP0 Guida all'installazione

Tiptel.com GmbH Business Solutions –Halskestraße 1 –40880 Ratingen –Deutschland –www.tiptel.com

FAQ tiptel 85 System (from vers. 2.xx)

Mode of Use: Office or Switchboard?

as of Dec. 08, 2008

1. Modes of use

When turning on the telephone with factory default settings for the very first time the user is prompted

to choose among two modes of use Office (Standard) or Switchboard (Receptionist). The mode

selected will be shown under the menu item "Information“ -> "Software". Changing the mode of use

at a later time is only possible by resetting the telephone to factory default settings.

When updating the firmware from Rel. 1 to Rel. 2 the mode Standard will automatically be set.

2. Predefined function keys in switchboard mode

When changing to switchboard mode the following function keys will be programmed in the phone:

Key 1 -Accept (accept waiting call)

Key 2 -Transfer (explicit call transfer)

Key 3 -Disconnect

For correct operation these keys may not be assigned by the PBX in any way. As before, function

keys configured within the PBX have a higher priority. The predefined keys can be reprogrammed

later as usual.

When selecting standard mode all keys on the telephone are not being pre-programmed.

Tiptel.com GmbH Business Solutions –Halskestraße 1 –40880 Ratingen –Deutschland –www.tiptel.com

3. Display keys (selection keys)

The main difference between standard mode and switchboard mode is the function of the display keys

(selection keys) when dealing with more than one call at the same time. Different connections will be

shown on the display in a list and can basically have three states:

One connection in "connected" state

One or more connections in "on hold" state

One or more connections in "call waiting" state

In standard mode

When operating the display keys with the connection list in standard mode a continuative list with

available options is shown (same as with release 1).

In switchboard mode

When operating the display keys in switchboard mode next to the connections "on hold" or "call

waiting" the predefined function will be carried out immediately:

Connections in "on hold" state Function “retrieve”

Connections in "call waiting" state Function "accept"

R030123456789

X Markham, Linda

Willis, John

Switchboard

retrive call

view available options

accept waiting call

Questo manuale è adatto per i seguenti modelli

2

Indice

Altri manuali TIPTEL Telefono IP

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Polycom

Polycom Polycom VVX 600 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale utente

Cisco

Cisco SPA-500 Series Manuale utente

Polycom

Polycom SoundPoint IP 650 Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Cisco

Cisco 7962 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente