Tirol GT02 Manuale utente
GPS TRACKER USER
MANUAL
PREFACE
Thank you for purchasing GPS tracker. This manual shows how to operate the device
smoothly in details, please make sure to read this manual carefully before using the
device. Please be noted that any update of the manual is made without prior notice.
Each time the update of the manual will be released in the latest product sales. The
manufacturer won’t assume any legal responsibility for any errors or omissions made
in this manual.
1. SUMMARY
Working based on existing GSM/GPRS network and GPS satellites, this product can
locate and monitor any remote targets by SMS, APP and Internet. It adopts the most
advanced technology of GPS and AGPS dual positioning.
Specifications
Content
Specs.
Dim.
90mm x 45mm x16mm
Weight
46g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz
GPS sensitivity
-159dBm
GPS accuracy
5m
Work voltage
12V-36v
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
5%--95% non-condensing
Main functions
·GSM quad-band frequency;
·Real time tracking by SMS/GPRS;
·Over speed alarm ;
·move alarm
·Geo-fence alarm
·Built-in backup battery to realize power failure alarm;( optional)
·Cut vehicle oil or circuit alarm (optional).
·ACC ignition and flame out inform (optional)
·Add Smart sleep save power Mode
·Add AGPS function,receive GPS signals faster
·Add built-in storage memory
·
2.Hardware Description
2.1) device front side towards the sky. When install in car, if the windscreen glued by
metal thermal insulation layer or heating layer, it will reduce the GPS receive signal
and lead to GPS work disorder.
The GPS tracker must be installed by professional personnel
2.2 Device wiring requirements
Device default is 2pin
1)red wire connect power positive+,
2)black wire connect power negative-,
3) Yellow wire connects to ACC
4) White wire connects to relay white wire
INDICATOR LIGHT
STATUS
MEANING
green light -Solid
GSM signal connection
green light -Flash
searching GSM signal
Blue light -Solid
GPS signal connection
Blue light -Flash
searching gps signal
Note: All led will turn off after 10 minutes for best hide.if you call the device sim
card number,so the led will turn on work again. Connect 12V-36 v voltage of the
power supply
3. Notices:
1. GPS tracking can be worked outdoor. Must have a mobile phone signal and have
GPS signal, can block GPS satellite signal when there are metal and building above
the GPS tracker
2.Please make sure GSM SIM card(2G GSM network or compatibility 2G GSM
network) supports making calls, sending messages, GPRS network.
3.Please make sure GSM SIM card is with sufficient balance.
4.Please make sure the GSM card has opened the call shows and turned off the call
transfer.
5.Please insert the GSM phone card correctly. Cancel the PIN code
6. a cording to the user manual to operation
4.Quick using
1) Open the rubber cover, insert the SIM card to the slot.
2) Put device outdoor ,connect to power supply 9V/36V ,
3) Dialing device number, it will hang up and receive Google Maps link of position
or sending message “smslink123456” to SIM card in tracker
5. SMS Command instruction
NOTE:
1)Device default password:123456)
2)use of mobile phones send messages to the tracker about all set command
3) The “+” in the command, please don’t type “+”, space means press
the space keyboard on your cell phone
4)After admin number setting, all alarm message will send authorization number
other cell-phone number send command will not reply
5) If you want standby time longer, pls don't open move alarm, and platform for
real-time location tracking.etc
6)The default mode is “GPRS”, Send SMS “sms+password” to the tracker, and it will
reply “sms ok!”close GPRS mode, replace SIM mode
5.1. Call the mobile number in tracker, you will receive a Google Maps link of
position, or sending message “smslink123456” to SIM card in tracker .
e.g:
EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
Pic（1）have gps signal Pic(2)no gps signal
Pic 1：Replied real-time tracking information under GPS satellites signal.
uLat:22.67533 lon:114.03913 Positioning of the latitude and longitude values.
uSpd：000.3 This refers to the device moving speed. The unit is km/h.
uT:06/14/17 09:14 real-tracking time, the Default is London time. You can set
a time zone by sms command
Google Link: This is the link to the Google map showing the position of the device.
Pic 2：Replied LBS information without GPS satellites signal.
usmcc:27a4 1223: Real-time LBS data.
uTime:08/00/00 LBS positioning time.
If you receive positioning information is picture 2, please go out the outdoor and
Walk around with gps tracker,for receive The satellite signal
5.2. Admin number setting (support 5pcs admin number )
After admin number setting, all alarm message will send authorization number
Set the first authorization number, then set the second, third, fourth and fifth
authorization numbers use the first authorization mobile phone number
device has two ways alarm, the first ways (SMS + platform): way123456 1
the Second way, (SMS+ platform+call): way123456 2
If you choose the second mean:
Alarm information will be sent to your Mobile phone by SMS/ call and will be sent t
o the platform by gprs also
Command: admin123456+space+ phone number（This phone number is your own
mobile phone number , not the mobile number in tracker .）
Reply：admin ok
E.g：admin123456 13725556021
Note: support 5pcs admin number , Set the first authorization number,then use use
the first authorization number to set other authorization number,
If the authorization number forget or lost, you can send reset123456 to Restore the
factory Settings
Admin number Canceling:
Command ：noadmin123456 13725556021
Reply：noadmin ok
5.3. Over-speed Alarm setting（It works only in continuous positioning mode.）
Over-speed Alarm setting:
Command ：speed123456+space+ speed（Suppose speed is 70km/h）note: not less
60KM/H
Reply：speed ok
E.g：
When the unit speed is over 70km/h, it will send message “speed alarm!” to the
admin number .
Over-speed Alarm canceling ：
Command ：nospeed123456
Reply：nospeed ok
5.4. move Alarm setting (It works only in getting gps signal, the scope is a circle
that radius 200meters)
Command：move123456
Reply：move ok
E.g：
move alarm Canceling:
Command：nomove123456
Reply：nomove ok
5.5 Terminal (local) Time Setting(factory setting GMT 0)
Command：time +space+zone123456+space +local time zone
Reply：time ok!
E.g：time zone123456 1
Questo manuale è adatto per i seguenti modelli
1
Indice
