TITTLA KME90F Manuale utente

Instruction Manual

ICE MAKER

SKU：KME90F/KME120F

It is important that you read these instructions carefully and keep it for futurereference.

The picture is for reference only. Please be subject to the actual

products.

Email：[email protected]

Phone:+1(510)228-4672

Website: https://Tittla.com /

IMPORTANT SAFETY INSTRUCTIONS

1. If connect with water supply, CAUTION: must connect the potable water supply;

2. The machine is intended to be used in household and similar applications such as

CAUTION: ICE CAN’T BE STORED IN THE ICE BIN DURING NIGHT TIME,IT’S NOT

When using electrical appliances, basic safety precautions should be followed to reduce the

risk of fire,electric shockand injury to persons or property.Read all instructions before

operating the machine for the first time.

FRIDGE,ICE WILL BE MELTED TO WATER AND GET OUT OF THE MACHINE.

the risk of fire,electric shock and injury to persons or property.Read all instructions

before using any appliance.

5. Don’t operate this or any other appliance with a damaged cord.

6. Connect to properly polarized outlets only.No other appliance should be plugged into th

-staff kitchen areas in shops,offices and other working environments;

-farm houses

-by clients in hotels,motels and other residential type environments;

-Catering industry and similar non-retail industry.

3. The machine should be used in household and without obstacles surrounded, good

ventilation place.There is must be 5.9 inches / 15 cm

at least between the four sides of the machine with the wall.

4. When using electrical appliances,basic safety precautions should be followed to reduce

same outlet.Be sure that the plug is fully inserted into the socket.

7. Don’t place the machine and power cord near flammable material.Do not cover the

cord.Do not submerge it in water.

8. We do not recommend the use of an extension cord,as it may overheat and become a

risk of fire.

9. Unplug the ice maker before cleaning or making any repairs or servicing.

10.Exercise caution and supervision when appliance is used near children.

11.Don’t use your ice maker outdoors.Avoid direct sunlight and make sure that there is at

least 5.9 inches / 15 cm of space between the back and sides of your unit and the wall.

12.Don’t use any liquid other than water in the unit to make the ice.

13.Do not clean your ice maker with flammable detergents.The fumes can create a fire

hazard or explosion.

14.Do not tip the machine over.

15.If the ice maker is brought indoors from outdoors during the wintertime,give it a few

hours to warm up to room temperature before plugging to power source.

16.This unit should be properly grounded for your safety.The power cord is equipped with a

three-prong plug which mated with standard three prong wall outlets to minimize the

possibility of electric shock.

17.Plug your appliance into a dedicated,properly installed and grounded wall outlet.Do

not,under any circumstance power and /or grounding should be directed toward a

certified electrician.

18. The foaming materials inside is combustible which must be kept away from fire.

19. It’s forbidden to pull the cable to unplug the plug,pull the plug is a must.

IMPORTANCE: To avoid hazard due to instability,unit must be placed on an even and flat

surface.

WARNING: The machine must be grounded.

1) Only connect to drinking water sources that meet local drinking water standards.

2) In addition to the method recommended by the manufacturer, no mechanical equipment

or other methods should be used to accelerate the defrosting process, which will damage

the system.

3)The refrigeration system contains high-pressure refrigerant, and the refrigeration system

must not be damaged. Special care must be taken during installation and handling,

installation and maintenance must be performed by a professional, and scrap must be

disposed of by designated recycling departments.

4)The ice machine has thermal insulation materials, which are flammable materials, and

must be kept away from the fire source.

UNPACKING YOUR ICE MAKER

Warning:Please keep foam and other packaging materials from children and disabled

people, as this may cause danger to them.

NOTE: Please remove all packages when using,or else the machine may not work properly.

a) Remove the packaging and check whether the machine is intact.

b) Open the accessory package and check whether the below accessories are included.

Accessories list

Description

Picture

Usage

QTY

Manual

Operation manual

1PC

Filter

Filter water

1PC

Spanner

Twist the filter off or on

1PC

Fixed plate

Fix the filter

1PC

Screw

To fix the filter

6PCS

Drainage pipe

Drain

1PC

Ice spoon

Take ice cubes

1PC

nylon cable ties

Fix pipe if needed

2PCS

Hoop

Fasten the drainage pipe together if

needed

1PC

Seal ring

Spare.Put in the joint which connects the

faucet.

1PC

Seal ring

Spare.Put in the other joint of filter.

1PC

Spare blue clip

Spare blue clip if needed.

2PCS

Spare plug

Spare plug which plug the tank if needed.

1PC

Feet

Screw fee before using the machine

4PCS

PTFE Tape

Tie up the connector if needed

1PC

The

placement

the

machine

Find

location

for

your

ice

maker

where

it’s

protected

from

direct

sunlight

and

other

on.

f)Clean

the

interior

with

lukewarm

water

and

soft

cloth

clean

the

unit

using

the

higher than 40℃(104ºF), ensure there is at least 5.9 inches / 15 cm

of space between the back and sides of your unit and the wall.

c) The machine should be placed on a stable place.

d) Please do not put anything on top of the machine.

sources of heat (i.e. stove, furnace, radiator). Place the ice maker on a level surface. Make

sure that there is at least 5.9 inches / 15 cm

of space between the back and sides of your ice maker and the wall.

b) The ambient temperature around the machine should not be lower than 3℃(37.4ºF),not

e)After you unpack the machine, we recommend you to leaving it for 24 hours before turning it

Self-

Clean

function.

g)The

appliance

must

positioned

where

the

plug

accessible.

Installation

and

connection

NOTE:

Installation

must

operated

according

the

manual

professional.

Water

connection

the

If you have any questions about the installation and connection, we can send the

tutorial video to you, pls contact us: Support email: [email protected]

Phone number:+1(510)228-4672

machine

Warning:

a.The

ice

machine

can

only

connected

drinking

water

source,

and

the

water

source

must

comply

with

local

drinking

water

standards.

b.The

water

supply

the

ice

maker

must

connected

filter

improve

the

drinking

standard

the

water.

Please

not

directly

connect

tap

water.

The

water

supply

pressure

should

within

14.5-58psi,

the

pressure

greater

than

58psi,

pressure

reducing

valve

needs

connected.

The

machine

drained

its

own

weight,

the

drain

pipe

should

have

sufficient

height.

1) Water intake

2) Drainage

Warning: Because the ice in the inner tank will melt, drain pipe must be connected before

using, and insert the drain pipe into a container or into the sewer.

Note: Connect one end of the drain pipe to the machine, and the other end to a container or

sewer. The other port of the drain pipe must be lower than the drain port of the machine.

WARNING:

1)The machine must be grounded.

2) The fusing current of the electrical box must be >10A,If it is to be replaced,must b

3)Electrical connection

operated by a technician.

3) voltage fluctuation can’t be exceed ±10% than rated voltage,or a Voltage stabilizer is

needed

4) The blue light installed inside the machine must be replaced by a professional.

MACHINE OPERATIONS

Operation Panel

Quick introduction

1. Connect and turn on the water faucet before power the machine.

2. Turn on the machine,it start to replenish water with lighted”adding water” and “lack of

water”,after finishing,it will enter to standby mode with “00”displayed in the screen. At the

same time,”adding water” and “lack of water” will be off.

3. ON/OFF SWITCH

Press to make ice,and hold for 2s to turn it off.

Hold for 2s to force the ice cubes fall from the evaporator ahead of time.

When the machine is in standby mode, press the “Cleaning” button to make the machine

automatically enter self-cleanprogram for 5 min.

A: When the machine is at the middle of ice making, press the“Reservation/+” button to

increase the making time in minute.

B:When the machine is at the middle of ice making or standby mode,hold the button for 2s

to set the auto-turning-on or auto-turning-on time(The time range is from 0-23 hour

,inhours).

A: When the machine is at the middle of ice making, press the“Light/-” button to reduce

the making time in minute.

B:Hold the button for 2s to turn off the blue light when the light is on.

Hold the button for 2s to turn on the blue light when the light is off.

A: the count down time for the ice making procedure or reservation time or replenishing water”

CLEANING & MAINTENANC

or standby mode.

B: “--” and standby indicator mean the machine is in standby mode.

C: “00”,”add water” and “ lack of water” indicator mean the machine is replenishing water.

INTERIOR: please use the following Self-Clean function:

1. Add water and vinegar or lemon juice mix (1:1 ratio)

2. Plug in unit,press and hold the CLEAN button for approximately 6-7 seconds,the

Please thoroughly clean your ice maker before initial use.

EXTERIOR: the outside of the ice maker should be cleaned regularly with a mild detergent

and warm water. Always use a soft cloth to avoid scratching or damaging the housing.

SPOON: clean with mild detergent and warm water in a week.

Storage tank: clean with mild detergent and warm water in a week.

PUMP: clean with mild detergent and warm water in a week. Turn off and unplug the

machine,take the pump out clean it with a brush then install it back.

release.The unit will automatically enter Self-clean program. This process takes about 5-

6 minutes.When the Self-Clean program is finished,unit will automatically power off.

3. The fan blade will be rotating.This process rinses the inside parts several times.

4. After the Self-Clean program is completed,unplug the power cord and drain out the water

by unplugging the drain cap on the side.Replace drain cap.

5. Add fresh water to the water reservoir,up to the water level mark.

6. Plug the unit and repeat the Self-Clean process by repeating steps 3 to 5. This will rinse

out the vinegar/lemon residue.

7. After draining the water,replace and tighten drain cap.

8. Dry the interior and exterior with a clean,soft cloth.

NOTE: It is strongly recommended to clean the unit before initial use or after the unit has

not been in use for a long period of time.

Circuit Diagram

Explosion diagram

1. Visible door

7. Touch board

13. Float

19.Main board

2. Door frame

8. Control board

14. Pump

20.Main board box

3. Top cover

9. Control board box

15.Compressor

21. Feet

4. Blue light

10. Inner tank

16. DC fan (Keep prevail)

22. Solenoid valve

5. Back panel

11. Water tank

17. Condenser

6. Front panel

12. Ice mold

18. Main board cover

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Macchina per il ghiaccio popolari di altre marche

Hoshizaki

Hoshizaki KMD-460MWJ Manuale utente

Sub-Zero

Sub-Zero 315I Istruzioni per l’uso

Unold

Unold 48945 Manuale utente

Kenmore

Kenmore 2217402A Manuale utente

Cornelius

Cornelius WM600 Istruzioni operative

GE XPIO43SCSS Manuale utente

Hoshizaki

Hoshizaki KMD-901MAH Manuale utente

Whynter

Whynter FIM-450HA Manuale utente

U-Line

U-Line UMCR014-SC01A Manuale di installazione

Andrew James

Andrew James AJ000522 Manuale utente

Scotsman

Scotsman CME1356 Manuale utente

Scotsman

Scotsman ACM 25 Manuale utente

Kärcher

Kärcher IP 120 Manuale utente

U-Line

U-Line SS1095 Manuale utente

Maytag

Maytag MIM1554WRS - Ice Maker Manuale utente

Hoshizaki

Hoshizaki KM-630MAH Manuale utente

Princess

Princess Yonanas Manuale utente

Unold

Unold 48946 Manuale utente