3 4
function settings
device name
device status
device ID
Red area introduction: when device is online, click red area into video surveillance
interface. When device is offline, click this area to refresh APP. (Please refer to Android
APP interface for other function introduction)
iOs APP Main Interface
Doorbell's indicator illustration:
●Slowly blink from red to blue: no router connection;
●Fast blink from red to blue: in pairing or connecting router state;
●Blue light is on: connected to router;
●Red light is on: calling
Connect Doorbell with Android/IOS Devices
1. Connect Doorbell with Power Supply
a. Correctly connect DC12V power (red wire is positive and black wire negative).
Please refer to power connector in Product Diagram.
b. Fix rain cover well into waterproof case, and wait for about 35 seconds to finish
booting. After beep music, indicator blinks slow from red to blue. Doorbell is in
standby status.
2. Pairing Operation
Steps for Android mobile:
a. make doorbell in pairing status: click doorbell's "pairing" key(please refer to its
location in Product Digram) and it alerts "paring". Meanwhile, indicator lamp blinks fast
from red to blue.
b. Make APP into pairing state: ensure Wifi open on mobile and run APP “idoorphone”,
click "Add Device" (see image 1) on APP. APP will auto search doorbell's hot spot;
then doorbell hints "paring success". Meanwhile, "WLAN" setting interface(as image 3)
auto appears on APP; and a image frame shows on APP. After this, mobile finishes
connection with doorbell's LAN.
Pairing status will last for 100 seconds; if pairing fails, doorbell tips "pairing failure".
iOs devices and some Android devices will not auto connect with doorbell's LAN. So
manually linking smart phone to doorbell’s hot spot is a must.) (see image 2)
Steps for iOs mobile:
a. Make doorbell in pairing status: click doorbell's "pairing" key (please refer to its
location in Product Digram) and it alerts "paring". Meanwhile, indicator lamp blinks fast
from red to blue.
b. Make APP into pairing state: ensure Wifi open on mobile and manually connect
mobile to doorbell's LAN(as image 4 shows). Run APP “idoorphone” and click "Add
Device" (see image 1) on APP. Then doorbell hints "paring success". Device will
appear on APP interface. (see image 5)
Note: before pairing, if outdoor unit is connected with WLAN by network cable, make
phone’s Wifi linked to this WLAN, click doorbell’s “pairing” key and APP’s “Add Device”
, and do pairing.
3. Network Setting
When device status is online on APP, click "Settings"-"WLAN"(after above successful
paring, Android APP will auto jump to this setting )-"Scan" (as image 3), select a router
and enter password. Touch "done" in upper right corner. Then APP will be auto back to
the APP main interface. Unit tips “password setting correct". And blue indicator light is
on. After this, doorbell’s Wifi hotspot will be hidden.
Push notification introduction of iPhone/iPad:
1. When APP is running in background and device status online, for any visitor call,
mobile has push notification.
2. When APP is running and device status online, double click iphone's "Home" key,
drag APP, slide it up and stop APP working. Then push notification of doorbell calls will
be sent to iPhone.
If APP is exited in APP's "About" interface, mobile can't receive any push notification
