TKH Optelecom 9000 Series Manuale utente

Optelecom 9000 Series

Installation and Operation Manual

Model 9900-SNMP

9900-SNMP software includes Optelecom’s enterprise MIB files. These files are

used with SNMP management software. The MIB files do not include SNMP

management software. The MIB files contain information associated with the

Optelecom plug-in cards for the Optelecom Series 9000 chassis that is required

for an SNMP management package to communicate with the 9942A

Management Card via Ethernet.

UM50380, Manual 9900-SNMP, Rev. D

Table of Contents

Section Page

Software Use Agreement 4

Functional Description 5

Operation of SNMP Management Software 6

Operation of SNMP Manager Software 7

Using the SNMP Agent 8

Software Use Agreement

PLEASE, READ THIS SOFTWARE LICENSE AGREEMENT CAREFULLY BEFORE DOWNLOADING,

INSTALLING, OR USING THE SOFTWARE.

By downloading or installing this software of TKH Security USA or its subsidiaries, you agree to the following

terms and conditions. If you do not agree with such terms and conditions, do not download or use the software.

Click the "Cancel" button and the installation process will discontinue.

DISCLAIMER OF WARRANTIES: YOU AGREE THAT TKH SECURITY USA HAS MADE NO EXPRESS WARRANTIES

TO YOU REGARDING THE SOFTWARE AND THAT THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS"

WITHOUT WARRANTY OF ANY KIND. TKH SECURITY USA DISCLAIMS ALL WARRANTIES WITH REGARD TO

THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, MERCHANTABLE QUALITY, OR

NONINFRINGEMENT OF THIRD PARTY RIGHTS.

TKH Security USA has made every effort possible to ensure that the software is free of any bugs or errors;

however, in no way is this software to be considered error- or bug free.

LIMIT OF LIABILITY: IN NO EVENT WILL OPTELECOM-USA BE LIABLE TO YOU FOR ANY LOSS OF USE,

INTERRUPTION OF BUSINESS, OR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES OF ANY KIND (INCLUDING LOST PROFITS) REGARDLESS OF THE FORM OF ACTION WHETHER IN

CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY OR OTHERWISE, EVEN IF

OPTELCOM-NKF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Functional Description

The 9900-SNMP Management Software Interface package includes TKH Security USA’s enterprise MIB files.

These files are used with SNMP management software. The MIB files contain information associated with the

TKH Security USA plug-in cards for the Series 9000 chassis that is required for an SNMP management package

to communicate with the TKH Security USA management cards via Ethernet.

NOTE: This package does not include the SNMP management software.

Operation of SNMP Management Software

Note: This section requires a basic understanding of SNMP protocol and management concepts.

Use of the SNMP software requires the installation of 9942A management cards in each chassis to be managed

via SNMP. The 9942A SNMP management card monitors and manages cards on one or more Series 9000

chassis via Ethernet connections to the PC running the SNMP manager software.

The 9942A SNMP agent communicates with any off-the-shelf SNMP Manager software that supports the

SNMPv1 or SNMPv2c standards. Examples of such software applications include SNMPc, MGSoft, and HP

OpenView. The details of the SNMP manager configuration vary from one vendor’s implementation to another.

You should refer to the manual of your SNMP manager software as you read the procedures described in this

section.

SET UP AND OPERATION CONSISTS OF THESE STEPS:

1. Configure each 9942A in your system for Ethernet operation. Refer to the 9942A manual for instructions on

configuration for SNMP operation.

2. If required, run the Management Upgrade Utility (MUU). Details can be found in the 9942A manual (see the

“Management Upgrade using the Management Upgrade Utility (MUU)” section).

Operation of SNMP Manager Software

Normally, the SNMP manager needs to be configured to operate with the TKH Security USA equipment using

the following generic steps:

Load and compile the TKH Security USA MIB files (OPTC-SMI.txt and OPTC-CHASSIS-MIB.txt) into your

SNMP manager application.

NOTE: You may need to change the file extension from ‘.txt’ to something that

your SNMP manager recognizes. For example, when using SNMPc, you should change MIB filenames to

OPTC-SMI.mib and OPTC-CHASSIS-MIB.mib.

Create an SNMP-entity node in the manager to identify the Series 9000 chassis (with the 9942A card) that

you wish to manage. Enter node properties such as IP address, SNMP version (SNMPv1 or SNMPv2c) and

community string (“public”).

Browse the standard MIBs under MIB-II and the various TKH Security USA MIB objects using the MIB

browser tools included in your SNMP manager software. You can view data items individually or in tabular

format.

Using the SNMP Agent

The following sections describe the MIB data supported by the 9942A SNMP agent and how to use the data to

manage the cards in an TKH Security USA Series 9000 chassis.

SNMP MIB DATA

The 9942A SNMP agent software provides management data that consists of both standard MIB data as well as

private enterprise MIB data.

STANDARD MIBS

The 9942A SNMP agent supports the following standard MIBs under MIB-II (RFC1213):



system



snmp



interfaces



ip, icmp



tcp



udp

TKH SECURITY USA SERIES 9000 CHASSIS MIB

The 9942A SNMP agent supports an TKH Security USA private enterprise MIB, the TKH Security USA Series

9000 Chassis MIB. This MIB provides the following management data:

Chassis Data

Chassis model number

Alarm level

Trap destination configuration

Generic Card Data

Card identification and overall alarm level

Applicable analog parameter information

Applicable status parameter information

Applicable control parameter information

Specific Card Data

•Information specific to particular card models such as 9984 Fiber Monitor & Switch Card (FMSC)

configuration information

Event Data

SNMP trap definitions for:

Chassis test trap event (to test SNMP sink configuration)

Card insertion/removal

Analog and status parameter alarm level events

Specific card events

The following subsections describe the major components of the TKH Security USA Series 9000 Chassis MIB.

Generic Card Table (optcGenCardTable)

The generic card table is indexed by ‘Slot index’. The slot index corresponds to a slot in the Series 9000 chassis.

Slot numbers in a Series 9000 chassis range from 0 to 20. Integer indices in SNMP are required to start from 1.

Therefore, the ‘Slot index’ object ranges in value from 1 to 21. Each row in the generic card table contains the

following information:

Slot index

Slot number

Slot status (empty/occupied)

Card width (number of slots occupied by the card)

Card model number

Card serial number

Card hardware revision

Card firmware revision

Number of power cycles applied to the card

Card uptime (in hours)

Overall card alarm level



Configuration save state (control variable to save configuration to card’s NVRAM)



Use defaults (control variable to set configuration parameters to default values)

Analog Table (optcAnalogTable)

The analog table contains information about analog parameters (if applicable) associated with cards present in

the Series 9000 chassis. The analog table is indexed by {Slot index, Analog index}. The Analog index uniquely

identifies an analog parameter among all analog parameters associated with a particular card. Each card can

have up to 6 analog parameters. Therefore, the analog index can range in value from 1 to 6. Each row in the

analog table contains the following information:

Slot index

Analog index

Slot number

Description of the analog parameter

Value (current value of the parameter, typically a floating point value)



Minimum Threshold (an alarm is generated if the parameter value falls below this threshold)



Maximum Threshold (an alarm is generated if the parameter value rises above this threshold)



Admin Alarm Level (user configurable alarm level for the parameter; can be one of Disabled, Info, Minor,

Major)

Operational Alarm Level (current alarm level evaluated by comparing current value with minimum and

maximum thresholds and checking the user-configured admin alarm level; can be one of Disabled, OK,

Info, Minor, Major)

Status Table (optcStatusTable)

The status table contains information about status parameters (if applicable) associated with cards present in

the Series 9000 chassis. The status table is indexed by {Slot index, Status index}. The Status index uniquely

identifies a status parameter among all status parameters associated with a particular card. Each card can have

up to 12 status parameters. Therefore, the status index can range in value from 1 to 12. Each row in the status

table contains the following information:

Slot index

Status index

Slot number

Description (of the status parameter)

State (current state of the parameter, for example, Present/Not Present)



Admin Alarm Level (user configurable alarm level for the parameter; can be one of Disabled, Info, Minor,

Major)



Operational Alarm Level (current alarm level evaluated using current state and user-configured admin

alarm level; can be one of Disabled, OK, Info, Minor, Major)

Control Table (optcControlTable)

The control table contains information about control parameters (if applicable) associated with cards present in

the Series 9000 chassis. The control table is indexed by {Slot index, Control index}. The Control index uniquely

identifies a status parameter among all control parameters associated with a particular card. Each card can

have up to 3 control parameters. Therefore, the control index can range in value from 1 to 3. Each row in the

status table contains the following information:

Slot index

Control index

Slot number

Description (of the control parameter)



State (user-configurable current state: can be one of set/clear)

Chassis Trap Sink Table

This MIB table allows the user to configure the destination (sink) and type of SNMP traps generated by the

9942A. Currently, the 9942A allows only one trap sink to be configured at a time. Therefore, the Trap Sink

Table has only one entry. This entry contains the following read/writable items:

IP address of the trap sink

TRAP PDU version to generate (SNMPv1 or SNMPv2)



Control variable to save the above settings to 9942A flash memory



Trigger variable to trigger the sending of a Chassis Test Event trap to the trap sink configured

SNMP OPERATIONS

This section describes the various management operations you can perform using the SNMP MIB data described

in the previous section.

GET CHASSIS STATUS

Chassis status includes the following information:

Alarm level (overall alarm level of chassis)

Model number

Trap sink (destination) configuration table (see section “Chassis Trap Sink Table”)

The above information can be obtained by doing SNMP Get operations on these objects. For example,

<snmpget> 192.168.0.80 public chassisModelNumber.0

where,

<snmpget> is the SNMP get command for your SNMP manager

192.168.0.80 is the IP address of the 9942A

‘public’ is the community string

chassisModelNumber.0 is the Object Identifier

GET GENERIC CARD INFORMATION

Common information about each slot and card in the chassis is obtained from the genCardTable MIB table. You

can view the entire table all at once using the appropriate command of your SNMP manager. If you want

generic card information for only one slot/card, for example a card in slot 0, do an SNMP Get for that particular

slot index (1).

To get the model number for the power supply card in slot 0:

<snmpget> 192.168.0.80 public genCardModel.1

To get how many slots the power supply card in slot 0 occupies:

<snmpget> 192.168.0.80 public genCardSlotWidth.1

Altri manuali per Optelecom 9000 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TKH Telaio

TKH

TKH Optelecom 9000 Series Manuale utente

Manuali Telaio popolari di altre marche

Advantech

Advantech IPC-623 Series Manuale utente

IMC Networks

IMC Networks iMcV/18 Manuale utente

Chenbro

Chenbro RB13804N4WFT Manuale utente

Lenovo

Lenovo ThinkSystem SR665 V3 Manuale utente

Wuntronic

Wuntronic PCI4DRQ Manuale utente

EtherWAN

EtherWAN EMC400 Manuale utente

Overland Storage

Overland Storage SnapSAN S1000 Guida

Philips

Philips LC4.1E A Manuale utente

Supermicro

Supermicro SCF418 Series Manuale utente

Chenbro

Chenbro RM437 Series Manuale utente

Pickering

Pickering 40-914 Manuale utente

HP A7503-S Istruzioni per il montaggio

Supermicro

Supermicro SC823MTQ-R700LPB Manuale utente

SilverStone

SilverStone RMS08 Series Manuale utente

NI cRIO-FRC II Manuale utente

Pickering

Pickering 65-200 Manuale utente

Allied Telesis

Allied Telesis AT-MMCR18 Manuale utente

Hisense

Hisense MSD6586 Manuale utente