TMT PAPILLON 250 Manuale utente

PAPILLON 250

ARTICULATED ARM OPENERS

24V DC GEAR MOTOR

USER MANUAL

INDEX

1.1 WARNINGS

1.2 MOTOR INSTALLATION

1.3 DIMENSION CHART

1.4 COMPONENTS OF INSTALLATION

1.5 INSTALLATION OF ARTICULATED ARM OPENER

1.6 EMERGENCY RELEASE

1.7 POWER SUPPLY CONNECTIONS

2.1 WIRING CONNECTION

2.2 MASTER MOTOR IS INSTALLED AT LEFT SIDE

2.2.1 STANDARD INSTALLATION

2.2.2 ADVANCED INSTALLATION (MOTOR WITH LIMIT SWITCH)

2.3 MASTER MOTOR IS INSTALLED AT RIGHT SIDE

2.3.1 STANDARD INSTALLATION

2.3.2 ADVANCED INSTALLATION (MOTOR WITH LIMIT SWITCH)

2.4 TRANSMITTER MEMORIZING AND ERASING PROCESS

2.5 SYSTEM LEARNING PROCESS

2.6 GET MOTOR RUNNING

2.7 RESTORE DEFAULT SETTING

2.8 LED INDICATION

2.9 GATE-MOVING LOGIC

2.10 CHECKING THE GATE MOVEMENT

2.11 MEANING OF LED DISPLAY

3. ADVANCED FUNCTION PARAMETER SETTING

3.1 HOW TO CHANGE

3.2 ADVANCED FUNCTION PARAMETER

4. PHOTOCELL INSTALLATION

4.1 PHOTOCELL WORKING LOGIC ADJUSTMENT

5. GREEN BOX INSTALLATION (OPTIONAL)

6. TROUBLE SHOOTING

7. TECHNICAL FEATURES

7.1 DIMENSION

7.2 TECHNICAL FEATURE

8. MAINTENANCE

1.1 WARNINGS

WARNING :

This user manual is only for qualified technicians who is specialized in installations and automations.

(1) All installations, electrical connections, adjustments and testing must be performed only after reading and understanding of all

instructions carefully.

(2) Before carrying out any installation or maintenance operation, disconnect the electrical power supply by turning off the magneto

thermic switch connected upstream and apply the hazard area notice required by applicable regulations.

(3) Make sure the existing structure is up to standard in terms of strength and stability.

(4) When necessary, connect the motorized gate to reliable earth system during electricity connection phase.

(5) Installation requires qualified personnel with mechanical and electrical skills.

(6) Keep the automatic controls (remote, push bottom, key selectors…etc) being placed properly and away from children.

(7) For replace or repair of the motorized system, only original parts must be applied. Any damage caused by inadequate parts and

methods will not be claimed to motor manufacturer.

(8) Never operate the drive if you have any suspect with what it might be faulty or damage to the system.

(9) The motors are exclusively designed for the gate opening and closing application, any other usage is deemed

in appropriate. The manufacture should not be liable for any damage resultingfrom the improper use. Improper usage should void

all warranty, and the user accepts sole responsibility for any risks thereby may accrue.

(10) The system may only be operated in proper working order. Always follow the standard procedures by following the instructions in this

installation and operating manual.

(11) Only command the remote when you have a full view of the gate.

Please keep this installation manual for future reference.

ARTICULATED ARM OPENERS USER MANUAL

1.3 DIMENSION CHART

1.2 MOTOR INSTALLATION

1. 24V DC blinker with integrated antenna

2. Push Button

3. Photocells

4. 24V DC articulated arm opener

5. PR-1 Transmitter

Plea n the chart for proper installation. If necessary, please adjust the gate structure to the

best operation.

Before starting the installation, please make sure that the gate moves freely and that :

1) Hinges are properly positioned and greased.

2) No any obstacle in the moving area.

3) No frictions between two gate leafs or and on the ground while moving.

4) Installation reference: to open the gate with 90 degree, please refer the data table below:

A: Distance between the gate hinge and the wall bracket.

B: Distance between the gate hinge and side face of the motor.

C: Distance between the gate hinge and the fixing point of the arm.

To open 90 degree.

100

150

200

250

300

unit: mm

625

615

600

585

565

540

100

575

565

550

535

515

150

545

540

Optional Optional

2x1.5 mm2

4x0.5 mm2

TX - 4x0.5 mm2

RX - 4x0.5 mm2

2x1.5 mm2

1.4 COMPONENTS OF INSTALLATION

1.5 INSTALLATION OF ARTICULATED ARM OPENER

ARTICULATED ARM OPENERS USER MANUAL

Straight arm

Curved arm

U-shaped fixing plate

Mechanical stopper

Front-end fixing bracket

Screw

Nut Ø10

Screw

Gasket

Screw

Spring washer

Nut Ø8

Cable gland

1 pce

2 pcs

1 pce

4 pcs

2 pcs

4 pcs

1 pce

3 4 5

13 12 11 10 9

1. Refer to the Dimension Chart to choose the correct dimensions of the motors and

position to be installed.

2. Check if the mounting surface of the brackets to be installed is smooth, vertical and rigid.

3. Arrange the cables for power supply cable of the motors.

4. Motor installation and setting for mechanical stopper in opened and closed position.

2) Place the gate in the full closed position and

fix the U-shaped fixing plate on the wall.

1) Remove the upper cover and mechanical

stoppers on the bottom of motor.

ARTICULATED ARM OPENERS USER MANUAL 3

1.6 EMERGENCY RELEASE

1) Insert the release key to the release slot

2) Turn the release key anti-clockwise

3) Pull out the release bar

4) Turn the release key clockwise to fix the release bar, the release bar has to be in pulled out position when turning

the release key clockwise

4) After positioning the front of curved arm on the bottom of motor,

release the motor and position the minor arm on the end of

curved arm and mounting bracket with corresponding screws

and nuts.

5) Closed position adjustment :

4.1 After the full closed position decided, fix the corresponding mechanical stopper at the position.

4.2 After the full closed position decided, make the pointer on limit switch aligned with the pointer on the curved arm.

(Red points shown on the figure below indicate the pointers)

6) Opened position adjustment :

5.1 Adjust the gate to full opened position and after the position decided, fixed with corresponding mechanical stopper.

5.2 Adjust the gate to full opened position and after the position decided, make the pointer on the electromechanical

limit switch aligned with the pointer on the curved arm. (Red points shown on the figure below indicate the pointers)

3) Install the motor on the U-shaped fixing

plate with corresponding screws and nuts.

Limit switch

Mechanical

Stopper

ARTICULATED ARM OPENERS USER MANUAL

Please kindly notice that the operation of power connection should be carried out by a qualified electrician with

following steps:

1). Make sure the gearmotor is not connected to the power supply before the installation is done.

2). Make sure all the wires are firmly connected.

3). Supply the gearmotor with the power.

2.1 WIRING CONNECTION

1.7 POWER SUPPLY CONNECTIONS

Figure 2(1)

Open Only

Device

Dual / Single

Gate (FJ)

Photocells connection is

detailed on page 5

Flashing

LightLatch

Transformer

Antenna

Green Box

LED Display

Blue LED – RF Learning

LED2 Push button or Key selector

LED3 Photocell 1

LED 4 Photocell 2

SET

DOWN

RF-LEARN

LED2LED4LED3

Lit+Lit-Lat+Lat-M1+M1-M2+M2-5VS1S2GNDLmt1Lmt2GNDLmt3Lmt4GNDGND Ph1Ph2 PhVccPhVcc GND DKeySKey

26 2425 23 2122 1920 18 1617 15 1314 11 1012 9 8 67 5 34 12

ARTICULATED ARM OPENERS USER MANUAL 5

M1+ M1-

Motor1 Power

2.2.1 STANDARD INSTALLATION

2.2.2 ADVANCED INSTALLATION (MOTOR WITH LIMIT SWITCH)

2.2 MASTER MOTOR IS INSTALLED AT LEFT SIDE

Antenna

M2-M1-

Lat-

Lit- Lmt4Lmt3

Lmt2

Lit+ SKey

M2+

M1+Lat+ Ph2Ph1 PhVcc PhVcc

S25V

ANT

GND

DKey GND

GND GND GND

Lmt1 GND

PC190-PCB1

40121-377-A1

SW3

Q17

SW1

RF-LEARN

RF1

K2K1

J4 J3

DB1

SW4

SET

SW5

DOWN

NC NO

+-- +

NONC

- +

NONC

NC NO

12345678

910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

LED2 LED3

LED4

M1- Limit1 Limit2 GNDM1+

Motor1 PowerLimit Switch

M2- Limit4 Limit3 GNDM2+

Motor2 PowerLimit Switch

Figure 2(2)

Figure 2(3)

Remark:

Limit1, Limit3 (Open limit)

Physical stopper mounted under motor unit (optional) + Driveway gate stopper (optional)

Limit2, Limit4 (Close limit)

M1 M2

M1+ M1-

Motor1 Power

Transformer

Antenna

M2-M1-

Lat-

Lit- Lmt4Lmt3

Lmt2

Lit+ SKey

M2+

M1+Lat+ Ph2Ph1 PhVcc PhVcc

S25V

ANT

GND

DKey GND

GND GND GND

Lmt1 GND

CB19-PCB1

40121-377-A1

+ -

SW3

Q17

R113

R112

R111

R110

R108

R107

R106

R105

R104

R103

R102

SW1

RF-LEARN

RF1

MOV1

K2K1

J4 J3

DB1

SW4

SET

SW5

DOWN

NC NO

+-- +

NONC

- +

NONCNC NO

12345678

910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

LED2 LED3

LED4

M2+ M2-

Motor2 Power

ARTICULATED ARM OPENERS USER MANUAL

2.3.1 STANDARD INSTALLATION

2.3.2 ADVANCED INSTALLATION (MOTOR WITH LIMIT SWITCH)

2.3 MASTER MOTOR IS INSTALLED AT RIGHT SIDE

Physical stopper mounted under motor unit (optional) + Driveway gate stopper (optional)

M2+ M2-

Motor2 Power

M1+ M1-

Motor1 Power

M2- Limit4 Limit3 GNDM2+

Motor2 PowerLimit Switch

Antenna

M2-M1-

Lat-

Lit- Lmt4Lmt3

Lmt2

Lit+ SKey

M2+

M1+Lat+ Ph2Ph1 PhVcc PhVcc

S25V

ANT

GND

DKey GND

GND GND GND

Lmt1 GND

PC190-PCB1

40121-377-A1

SW3

Q17

SW1

RF-LEARN

RF1

K2K1

J4 J3

SW4

SET

SW5

DOWN

NC NO

+-- +

NONC

- +

NONC

NC NO

12345678

910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

LED2 LED3

LED4

Antenna

M2-M1-

Lat-

Lit- Lmt4Lmt3

Lmt2

Lit+ SKey

M2+

M1+Lat+ Ph2Ph1 PhVcc PhVcc

S25V

ANT

GND

DKey GND

GND GND GND

Lmt1 GND

PC190-PCB1

40121-377-A1

+ -

SW3

Q17

R113

R112

R111

R110

R108

R107

R106

R105

R104

R103

R102

SW1

RF-LEARN

RF1

MOV1

K2K1

J4 J3

DB1

SW4

SET

SW5

DOWN

NC NO

+-- +

NONC

- +

NONC

NC NO

12345678

910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

LED2 LED3

LED4

M1- Limit1 Limit2 GNDM1+

Motor1 PowerLimit Switch

Figure 2(5)

Figure 2(6)

Remark:

Limit1, Limit3 (Close limit)

Limit2, Limit4 (Open limit)

M1M2

AC INPUT

23456

ARTICULATED ARM OPENERS USER MANUAL 7

2.5 SYSTEM LEARNING PROCESS

2.4 TRANSMITTER MEMORIZING AND ERASING PROCESS

(A) Transmitter Memorizing: Press and hold the “RF-LEARN” button on the PCB for 1 second and then the blue LED

indicator on the RF board will be “ON”. Press A button for dual-gate installation ; press B button for single-gate

installation on the transmitter within 5 seconds. The transmitter learning is completed

when the blue indicator blinks 3 times and turns OFF.

(B) Transmitter Memory Erasing: Press and hold the “RF-LEARN” button on the PCB for 10 seconds until blue LED off.

Step1: Connect the master motor wires to M1 terminals and the slave motor wires to M2 terminals correctly.

If only one gate is installed, the motor wires have to be connected to M1 terminals.

Step2: Set the function F2-1 for dual gate learning; or set the function F2-2 for single gate learning.

Step3: To start dual gate system learning.

To start dual gate system learning:

Press and hold the "SET+DOWN" button on the PCB for 3 seconds. The LED display will show “LEA” and process the

system learning automatically. Do not interrupt this procedure by pressing the remote or stop the gate. In system

learning mode, the gate will proceed with the following procedure figure on page 8.

The LED display will show “RUN”, once the system learning is complete.

To single dual gate system learning:

Press and hold the "SET+DOWN" button on the PCB for 3 seconds. The LED display will show “LEA” and process the

system learning automatically. Do not interrupt this procedure by pressing the remote or stop the gate. In system

learning mode, the gate will proceed with the following procedure figure on page 8.

The LED display will show “RUN”, once the system learning is complete.

Press

3 Sec

1 2

1314

LED1

LED2

LED3

OFF

SET LEA

RUN

ARTICULATED ARM OPENERS USER MANUAL

2.6 DUAL/SINGLE GATE OPERATION

SYSTEM LEARNING IN PROCESS

Press the button “A” on the transmitter for dual-gate operation.

Press the button “B” on the transmitter for single-gate

operation in either single-gate or dual-gate installation.

2.7 RESTORE DEFAULT SETTING

Press and hold “UP+SET+DOWN” button on the PCB for 5 seconds. The system will restore to the default setting

without any system learning memory.

A. Dual Gate:

Slave Gate Close → Master Gate Close → Master Gate Open → Slave Gate Open →

Slave Gate Close → Master Gate Close

B. Single Gate :

Master Gate Close → Master Gate Open → Master Gate Close

2 3

1 2 3

2 3

1 2 3

4 5 6

Notes:

(A) System learning fails and needs to be learned again when an unpredictable interruption occurs.

(B) Once the system learning is completed, there is no need to proceed with the learning process again when there isa

power failure.

A B

Indice

Altri manuali TMT Apricancello

TMT

TMT HUSKY500 Manuale utente

TMT

TMT Mastiff 300m Manuale utente

Manuali Apricancello popolari di altre marche

Elite

Elite CSW200UL Manuale utente

CAME

CAME FROG-PM4 Manuale utente

SOMFY

SOMFY FX230 Manuale utente

Aprimatic

Aprimatic ONDA 500 Manuale utente

Turnstiles

Turnstiles FSW 900 Manuale utente

Erreka

Erreka BUL BL33 Istruzioni operative

Erreka

Erreka VULCAN S Manuale utente

Beninca

Beninca R1-2 WBV Manuale utente

Erreka

Erreka VULCAN D Manuale utente

Motorline professional

Motorline professional FORT Manuale di istruzioni

Beninca

Beninca BOB5024 Manuale utente

AGA

AGA GATEMASTER 900 HD Manuale utente

Chamberlain

Chamberlain MotorLift HC280ML Manuale utente

SOMFY

SOMFY Dexxo RTS Pro Manuale utente

Cardin

Cardin BL Series Manuale utente

Westfalia

Westfalia 85 27 06 Manuale utente

CAME

CAME F500 Manuale utente

Extel

Extel VERA Manuale utente